Pear New Mill
   HOME

TheInfoList



OR:

Pear New Mill is a former Edwardian cotton spinning mill on the northern bank of the
River Goyt The River Goyt is a tributary of the River Mersey in North West England. Etymology The name ''Goyt'' may be derived from the Middle English ''gote'', meaning "a watercourse, a stream". Derivation from the Welsh ''gwyth'' meaning "vein" has bee ...
in
Bredbury Bredbury is a town in the Metropolitan Borough of Stockport, Greater Manchester, England, south-east of Manchester, east of Stockport and south-west of Hyde, Greater Manchester, Hyde. At the 2011 census, it had a population of 16,721. It i ...
, Stockport,
Greater Manchester Greater Manchester is a metropolitan county and combined authority area in North West England, with a population of 2.8 million; comprising ten metropolitan boroughs: Manchester, Salford, Bolton, Bury, Oldham, Rochdale, Stockport, Tam ...
, England. It is a
Grade II* listed building In the United Kingdom, a listed building or listed structure is one that has been placed on one of the four statutory lists maintained by Historic England in England, Historic Environment Scotland in Scotland, in Wales, and the Northern Ir ...
. Pear Mill was one of the last cotton spinning mills to be built in England, commencing production in July 1913. The architects were A.H. Stott & Sons but because of difficulties in financing, it was completed by P.S. Stott. The building is typical of their work, with concrete floors and meticulous detailing. It was designed as a double mill, but the second mill was never built. The power was provided by a Manhattan-type steam engine by
George Saxon & Co George Saxon & Co was an English engineering company that manufactured stationary steam engines. It was based in the Openshaw district of Greater Manchester, Manchester. The company produced large steam-driven engines for power stations and la ...
. Transmission was by rope drives. The mill had 137,312 mule spindles which remained until the 1950s, when they were replaced by 33,636 ring spindles, the mill being electrified at the same time. It ceased operation as a
textile mill Textile Manufacturing or Textile Engineering is a major industry. It is largely based on the conversion of fibre into yarn, then yarn into fabric. These are then dyed or printed, fabricated into cloth which is then converted into useful goods ...
in March 1978.


Location

The mill was built next to the
River Goyt The River Goyt is a tributary of the River Mersey in North West England. Etymology The name ''Goyt'' may be derived from the Middle English ''gote'', meaning "a watercourse, a stream". Derivation from the Welsh ''gwyth'' meaning "vein" has bee ...
, just outside the Borough of Stockport.


History

The Pear Spinning Company, Lower Bredbury, was registered in 1907, with the intention of erecting a large double mill. It was one of the Stockport Limiteds mills, modelled on the
Oldham Limiteds Oldham Limiteds were the 154 cotton manufacturing companies founded to build or operate cotton mills in Oldham in northwest England, and predominantly during the joint-stock boom of 1873–1875. History Oldham was late in coming to cotton, and did ...
. It had a share capital of £100,000 in £5 shares. Work began in 1908, but the demand for cotton ended and it was difficult to raise capital. With £55,000 spent, the shell of the mill had been completed when the company was put into liquidation in January 1912. In April a new company was floated to finish the mill. This was the Pear New Mill Limited – it had a capital of £90,000 in £3 shares. Production started in July 1913 and the mill was fully equipped for spinning medium and fine counts by November. Immediately production was interrupted by the 1914–1918 war. The two years between 1918 and 1920 were years of an exceptional boom, and the 1912 company was refloated with a capital of £250,000. This was the Pear New Mill (1919) Ltd company. The war had taken its toll on the Lancashire cotton industry and former markets such as India, China and Japan had built up their own spinning capacity. The price of cotton pieces fell to 38% of their 1913 value and though Pear New Mill did survive it lost its independence, and became part of
Combined Egyptian Mills Ltd Combined Egyptian Mills Ltd was a British textile joint-stock company established in 1929 with headquarters at Howe Bridge Mills in Atherton, then in Lancashire, to buy and return to profitability, 34 financially failing cotton mills owned by 16 c ...
.


Architecture

This was a large six-storey mill with steel frame and cast iron columns; the floors were of concrete. It was built by
Stott and Sons Stott and Sons was an architectural practice in Lancashire between 1847 and 1931. It specialised in cotton mills, designing 191 buildings of which 130 were mills or buildings related to the cotton industry. Abraham Henthorn Stott was born on 25 A ...
but when Abraham Stott Junior was removed from the board of directors, the contract passed to his cousin and rival P.S. Stott. The mill had seven storeys if the cellar is counted, and attached are two-storey extensions for carding. The office was separate from the mill. Stott mills were known for their careful detailing, extensively using
terracotta Terracotta, terra cotta, or terra-cotta (; ; ), in its material sense as an earthenware substrate, is a clay-based unglazed or glazed ceramic where the fired body is porous. In applied art, craft, construction, and architecture, terracotta ...
to detail red
Accrington brick Accrington bricks, or Nori, are a type of iron-hard engineering brick, produced in Altham near Accrington, Lancashire, England from 1887 to 2008 and again from 2015. They were famed for their strength, and were used for the foundations of the B ...
and large windows. The window heads were flat, except on the top storey, where round-headed arches were used. The window heads were picked out in yellow brick. The
pear Pears are fruits produced and consumed around the world, growing on a tree and harvested in the Northern Hemisphere in late summer into October. The pear tree and shrub are a species of genus ''Pyrus'' , in the family Rosaceae, bearing the po ...
'signature theme' of the building includes a large pear-shaped concrete
cupola In architecture, a cupola () is a relatively small, most often dome-like, tall structure on top of a building. Often used to provide a lookout or to admit light and air, it usually crowns a larger roof or dome. The word derives, via Italian, fro ...
on top of the
water tower A water tower is an elevated structure supporting a water tank constructed at a height sufficient to pressurize a distribution system for potable water, and to provide emergency storage for fire protection. Water towers often operate in conju ...
at the south-east corner, and pear-shaped
finials A finial (from '' la, finis'', end) or hip-knob is an element marking the top or end of some object, often formed to be a decorative feature. In architecture, it is a small decorative device, employed to emphasize the apex of a dome, spire, towe ...
at each corner of the flat roof. Ornate terracotta
friezes In architecture, the frieze is the wide central section part of an entablature and may be plain in the Ionic or Doric order, or decorated with bas-reliefs. Paterae are also usually used to decorate friezes. Even when neither columns nor ...
over the main entrances continue the theme with
bas-relief Relief is a sculptural method in which the sculpted pieces are bonded to a solid background of the same material. The term '' relief'' is from the Latin verb ''relevo'', to raise. To create a sculpture in relief is to give the impression that th ...
depictions of pear leaves and fruit.


Power

It was powered by a George Saxon 5000 hp twin Manhattan Compound, made in 1912. Running at 180 psi, it had two 30 in HP cylinders and two 60 in low-pressure cylinder. It had a 4-foot-6-inch stroke and operated a 23-foot-diameter flywheel at 80.5 rpm and 26 ropes; the flywheel had 73 rope grooves and was 15 feet wide, probably the widest in any cotton mill. It had drop valves on horizontal HP cylinders and Corliss valves on vertical LP cylinders. Tail rod support guides were on HP cylinders. Air pumps were driven from LP crossheads. It was removed by Mr Jim Price in 1962. The later ring frames were electrically driven.


Equipment

The mill had 52 pairs of spinning mules with a total of 137,312 spindles, and employed approximately 300 people. In 1929 the mill was acquired by
Combined Egyptian Mills Ltd Combined Egyptian Mills Ltd was a British textile joint-stock company established in 1929 with headquarters at Howe Bridge Mills in Atherton, then in Lancashire, to buy and return to profitability, 34 financially failing cotton mills owned by 16 c ...
, a merger of 15 small companies that controlled over 30 mills. The building was modernised in the late 1950s, when electrically driven ring frames were installed, and in 1965 it was taken over by Carrington Viyella.


Usage

Originally it was designed to spin best Egyptian cottons, in what was technically termed "combed" and "super carded yarns." However, in 1913 it started spinning mediums, 34s to 78s from American, Brazilian and Egyptian. By 1916 it had dropped Brazilian and did 40s to 90s, it then in 1917 purchased combing equipment and produced up to 120s then by 1929 it purchased Egyptian solely and ran 140s. They employed 300 people. The cotton count is a measure of the fineness of the yarn, the higher number being the finer. Egyptian cotton has the longest staple so is most suitable for fine counts.


Owners

*Pear Spinning Company – 1907 *Pear New Mill Ltd – 1912 *Pear New Mill (1919) Ltd – 1919 *
Combined Egyptian Mills Ltd Combined Egyptian Mills Ltd was a British textile joint-stock company established in 1929 with headquarters at Howe Bridge Mills in Atherton, then in Lancashire, to buy and return to profitability, 34 financially failing cotton mills owned by 16 c ...
– April 1929 *Combined English Mills (Spinners) Ltd – 1953 *Carrington Vyella – 1964 *Multiple ownership


See also

*
List of mills in Stockport This list of mills in Stockport, lists textile factories that have existed in Stockport, Greater Manchester, England. From the Industrial Revolution until the 20th century, Stockport was a major centre of textile manufacture, particularly c ...
*
Grade II* listed buildings in Greater Manchester There are 236 Grade II* listed buildings in Greater Manchester, England. In the United Kingdom, the term listed building refers to a building or other structure officially designated as being of special architectural, historical or cultural ...
*
Listed buildings in Bredbury and Romiley Bredbury and Romiley are towns in the Metropolitan Borough of Stockport, Greater Manchester, England. The towns, together with the area of Woodley and the village of Compstall and the surrounding countryside, contain 43 listed buildings that are ...
*
Textile manufacturing Textile Manufacturing or Textile Engineering is a major industry. It is largely based on the conversion of fibre into yarn, then yarn into fabric. These are then dyed or printed, fabricated into cloth which is then converted into useful goods ...
*
Cotton mill A cotton mill is a building that houses spinning or weaving machinery for the production of yarn or cloth from cotton, an important product during the Industrial Revolution in the development of the factory system. Although some were driven b ...
*
Houldsworth Mill, Reddish Houldsworth Mill, also known as Reddish Mill, is a former mill in Reddish, Stockport, Greater Manchester, England (). Designed by Abraham Stott, it was constructed in 1865 for Henry Houldsworth, a prominent mill owner at the time. It is a Grade ...


References

;Notes ;Bibliography * * * *


Further reading

*


External links


www.cottontown.org

www.spinningtheweb.org.uk
{{DEFAULTSORT:Pear Mill, Stockport Textile mills in the Metropolitan Borough of Stockport Buildings and structures in the Metropolitan Borough of Stockport Cotton mills