Otso (icebreaker)

''Otso'' is a Finnish state-owned icebreaker. Built by Wärtsilä Helsinki shipyard in 1986 to replace the aging ''Karhu''-class icebreakers, she was the first Finnish post-war icebreaker to be built without bow propellers. ''Otso'' has an identical sister ship, ''Kontio'', which was delivered in 1987.

Development and construction

In the early 1980s, the Finnish National Board of Navigation began looking for a replacement for the aging ''Karhu''-class icebreakers ''Karhu'', ''Murtaja'' and ''Sampo'' which had been built in the late 1950s and were no longer wide enough to escort modern merchant ships.Karhu II - A new-generation icebreaker. Shipping World & Shipbuilder, October 1985. Furthermore, the old icebreakers were expensive to operate and, despite their small size, required a relatively large crew of 53.Kaukiainen (1992), page 330. The development of the new class of icebreakers, dubbed ''Karhu II'' in the preliminary papers, intensified when Wärtsilä opened a new ice model test facility in 1983. The tenth post-war icebreaker of Finland was ordered from Wärtsilä Helsinki shipyard on 19 March 1984 with a price of FIM 235 million. The ship was launched on 12 July 1985 and delivered to the owners on 30 January 1986. Her name, ''Otso'', is one of the many euphemisms for bear in the Finnish language. In January 1987, ''Otso'' was followed by a similarly-named sister ship, ''Kontio'', after which the three ''Karhu''-class icebreakers were decommissioned and sold.

During extensive ice trials in the Bothnian Bay in March 1986, ''Otso'' was put through a series of test to determine her icebreaking capability. In a race against the 1975-built ''Urho'' in level ice, ''Otso'' beat the older but more powerful four-propelled icebreaker by more than a ship's length,Turunen (2011), pages 37–39. showing that in terms of ice resistance the new icebreaker was superior to her predecessor. In ice, she could easily maintain a speed of and small ice ridges along the way appeared to be of no consequence to the vessel. However, the strength of the new icebreaker was put to the ultimate test when she encountered a large pressure ridge reaching all the way to the seafloor some below the surface. After preparations, ''Otso'' was accelerated to a speed of and rammed into the ridge at full power. Since the new icebreaker had a smooth inclined stem and lacked the bow propellers of her predecessors, she rode up the ridge and began listing to the port side as the hull rose from the water. After coming to a stop, ''Otso'' slid back by herself without utilizing the engines, and the ridge was penetrated on the second charge. The robustness of the ship and its propulsion system were further proven when the icebreaker was backed into a ridge at "to prove to the customer it doesn't break".Icebreakers!
Popular Mechanics, February 1989. Retrieved 14 October 2012

Considered to be a successful design that incorporated the latest Finnish icebreaker technology, ''Otso'' was later used as a design basis for the United States Coast Guard icebreaker ''Healy''.

Technical details

General characteristics

Although the ''Otso'' is slightly shorter than her predecessors ''Urho'' and ''Sisu'', she is slightly wider and was, at the time of her delivery, the widest subarctic icebreaker in the world with a beam of . However, with a maximum draft of and a minimum operating draft of only , ''Otso'' is able to escort ships to shallower ports than her predecessors.Telakoiden vaikein vuosi menossa. Navigator 6/1986. The displacement of the icebreaker is 9,222 tonnes.

In many ways, ''Otso'' was a significant departure from the traditional Finnish icebreaker design. The extended bridge wings on top of the stylish superstructure feature full-depth all-round windows that provide almost 360 degree visibility from the main steering position, which has been moved to the starboard bridge wing from the centerline. Furthermore, the traditional colours dating back to the Imperial Russian era, yellow and black, were replaced with the colors of the flag of Finland, blue and white. Due to the extensive use of advanced automation, which allowed everything ranging from starting and stopping the main engines to raising and lowering the flag to be done remotely from the bridge, ''Otso'' had the smallest crew among Finnish state-owned icebreakers when she entered service in 1986. Later her crew has been further reduced to 20. ''Otso'' was also the first icebreaker in which the lifeboats, unusable in ice-infested waters, were replaced with inflatable life rafts that could be lowered on the ice.

While ''Otso'' holds the highest Finnish-Swedish ice class, 1A Super, it has hardly any meaning for icebreakers which are of considerably stronger build than merchant ships operating in their care. Coated with low-friction Inerta160 epoxy paint, the hull plating has thickness of over in the bow and the waterline is protected by an explosion welded stainless steel compound plating that further reduces ice friction and resists abrasion. Galvanic corrosion is prevented by active cathodic protection.

Power and propulsion

Like all modern Finnish icebreakers, ''Otso'' has a diesel-electric propulsion system. It utilizes the so-called power plant principle in which the main generators provide electricity for all shipboard consumers through a common busbar. Her main generators, four 16-cylinder Wärtsilä Vasa 16V32 four-stroke medium-speed diesel engines producing 5,460kW each and driving 7,540 kVA Kymi- Strömberg alternators, are located on the upper deck beneath the helicopter platform.Cycloconverters for the new icebreaker from Kymmene-Strömberg. Navigator 1985. In addition, she has two smaller Wärtsilä 4R22/26 generators with an output of 350kW for use in ports.Jäänmurtajalaivastoa uusitaan. Suomen Merenkulku 2/1985. Pages 6–8. The uncommon location of the engine room was chosen to improve the seakeeping characteristics of the icebreaker by moving the center of gravity higher to calm the ship's motions in heavy weather. In addition, the maintenance of the main engines is easier as the heavy engine components can be handled with the ship's main crane and the heavy fuel oil tanks could be placed amidships to reduce the probability of an oil spill in case of grounding. , ''Otso'' and her sister ship ''Kontio'' are the only Finnish icebreakers running on heavy fuel oil which, being the cheapest fuel available, reduces operational costs of the icebreaker.

''Otso'' was the first icebreaker in the world to utilize cycloconverters and alternating current (AC) propulsion motors. Although electrical propulsion had already been used in Finnish icebreakers for almost five decades due to its flexibility and good torque characteristics at low propeller speeds, the older vessels had direct current (DC) propulsion motors which were very heavy and bulky at such power levels. Although it would have been possible to use two smaller DC motors in tandem, recent advances in drive and control technology as well as excellent experiences from a prototype installation on board the Finnish research vessel ''Aranda'' were in favor of the new type of propulsion system. As a result, ''Otso'' was fitted with two Kymi-Strömberg synchronous AC motors rated at 7,500kW. The maximum power is available at propeller speeds ranging from 115 to 220rpm to both directions and at lower speeds the propulsion motors are capable of providing 130% of the rated torque to prevent the four-bladed stainless steel propellers from jamming in severe ice conditions. The bollard pull of ''Otso'' is 160tonnes.

Prior to the construction of ''Otso'', all Finnish state-owned icebreakers built after the Second World War had been fitted with two bow propellers to reduce the friction between ice and the hull of the vessel in difficult ice conditions. However, the quad-shaft propulsion system was expensive to build and maintain, and the forward propeller bossings considerably increased the resistance of the ship. Although Finnish icebreaker captains voiced their concerns about the maneuverability and icebreaking capability of a vessel without bow propellers especially in heavy ice ridges and at crawling speeds,Otso osoittautui kelpo murtajaksi. Suomen Merenkulku 4/1986. Pages 22–24 extensive model testing at Wärtsilä's new ice model test basin showed that the ice resistance could be reduced by replacing the bow propellers with a "clean" hull and adopting an air bubbling system to lubricate the hull. The patented Wärtsilä Air Bubbling System (WABS) onboard ''Otso'' consists of three compressors with a combined output of 1,900kW that pump air through 46 nozzles located below the waterline on both sides of the vessel. At low speeds, the system can also be used for manoeuvering. In addition, she has large ballast tanks and high-capacity pumps that can be used for rapid heeling and trimming to release the icebreaker if she is immobilized by compressive pack ice.

In 1996, ''Otso'' was fitted with a bow thruster to assist manoeuvering while the icebreaker was drydocked at Vuosaari shipyard.

Career

Before ''Otso'' entered service in 1986, the Finnish icebreaker captains were sceptical about the ability of an icebreaker without bow propellers to operate successfully in the shallow Finnish waters characterized by heavy ice ridges. However, after the early teething problems and successful ice trials, the opinions changed and the performance of the "Bubbler of the Bothnian Bay" was generally deemed to be satisfactory. Over the years, ''Otso'' and her sister ship ''Kontio'' have proved to be very cost-efficient and for that reason they are the first Finnish state-owned icebreakers to be deployed for icebreaking in the Gulf of Bothnia every winter.

Until 2015, ''Otso'' and ''Kontio'' were the last Finnish icebreakers designed solely for escorting merchant ships through ice-infested waters. In the 1990s, the Finnish Maritime Administration commissioned three multipurpose icebreakers with a secondary role in offshore construction projects during the summer months. However, due to the criticism of the multipurpose icebreakers and Arctic offshore drilling in general, the new icebreaker that will replace the aging ''Voima'' in 2015 will be a traditional one.

In April 2015, Arctia Shipping announced that ''Otso'' had been chartered to an unnamed client to support seismic surveys in the Arctic for two years with an option of two additional years. The vessel was upgraded for service in the northern latitudes by increasing her ice strengthening, previously adequate only for icebreaking in the Baltic Sea, to '' Polar Class 4'' (PC 4) which is intended for vessels operating year-round in thick first-year ice which may include old ice inclusions. Furthermore, a anti-rolling tank was installed to improve her open water characteristics. Other additions included lifeboats to allow unrestricted worldwide service as well as a new helideck. The modifications were carried out by Rauma Marine Constructions. After the summer season in the Arctic, ''Otso'' would return to the Baltic Sea icebreaking duty by November as mandated by the icebreaking contract between Arctia Shipping and the Finnish Transport Agency.Otson kylkiin terästä, kannelle helikopterikenttä ja vesiallas – miehistölle arktiset palkanlisät
Talouselämä, 10 April 2015.

Notes

References

Bibliography

*
*

{{DEFAULTSORT:Otso
1985 ships
Icebreakers of Finland
Ships built in Helsinki