OPS-SAT is a

CubeSat A CubeSat is a class of miniaturized satellite based around a form factor consisting of cubes. CubeSats have a mass of no more than per unit, and often use commercial off-the-shelf (COTS) components for their electronics and structure. CubeSats ...

by the

European Space Agency , owners = , headquarters = Paris, Île-de-France, France , coordinates = , spaceport = Guiana Space Centre , seal = File:ESA emblem seal.png , seal_size = 130px , image = Views in the Main Control Room (120 ...

(ESA) and it is intended to demonstrate the improvements in mission control capabilities that will arise when satellites can fly more powerful on-board computers. The mission has the objective to break the cycle of "has never flown, will never fly" in the area of satellite control. It was the first CubeSat operated directly by ESA. The satellite has an experimental computer that is ten times more powerful than traditional ESA on-board computers. This on-board computer provides an experimental platform to run software experiments on board. One innovative concept is the deployment of space software in the form of apps. This concept is enabled by the NanoSat MO Framework (NMF) and allows Apps to be uploaded to the spacecraft and then started on board. This is a new concept that ESA has successfully demonstrated in space. OPS-SAT has been launched at 08:54:20 UTC on 18 December 2019 exactly twenty-four hours later than originally planned.

Payload and communications

OPS-SAT will provide an in-orbit test-bed environment for the deployment of different experiments to test new protocols, new algorithms, and new techniques. The satellite is being designed to be robust and no

single point of failure A single point of failure (SPOF) is a part of a system that, if it fails, will stop the entire system from working. SPOFs are undesirable in any system with a goal of high availability or reliability, be it a business practice, software ap ...

should exist, therefore it shall be always possible to recover the spacecraft if something goes wrong with one of the software experiments. The robustness of the basic satellite itself will allow ESA flight control teams to upload and try out new, innovative control software submitted by experimenters. OPS-SAT payload devices: * Experimental Platform: Critical Link MityARM 5CSX * Fine ADCS * GPS * Camera *

Software-defined radio Software-defined radio (SDR) is a radio communication system where components that have been traditionally implemented in analog hardware (e.g. mixers, filters, amplifiers, modulators/demodulators, detectors, etc.) are instead implemented by ...

* Optical Receiver Communication links to ground: *

S band The S band is a designation by the Institute of Electrical and Electronics Engineers (IEEE) for a part of the microwave band of the electromagnetic spectrum covering frequencies from 2 to 4 gigahertz (GHz). Thus it crosses the conventi ...

CCSDS The Consultative Committee for Space Data Systems (CCSDS) was founded in 1982 for governmental and quasi-governmental space agencies to discuss and develop standards for space data and information systems. Currently composed of "eleven member agenc ...

-compatible S-band communication: Syrlinks - EWC31 *

X band The X band is the designation for a band of frequencies in the microwave radio region of the electromagnetic spectrum. In some cases, such as in communication engineering, the frequency range of the X band is rather indefinitely set at approxi ...

CNES The (CNES; French: ''Centre national d'études spatiales'') is the French government space agency (administratively, a "public administration with industrial and commercial purpose"). Its headquarters are located in central Paris and it is und ...

funded X-band transmitter (payload of opportunity) *

UHF Ultra high frequency (UHF) is the ITU designation for radio frequencies in the range between 300 megahertz (MHz) and 3 gigahertz (GHz), also known as the decimetre band as the wavelengths range from one meter to one tenth of a meter (on ...

: Backup communications link

Experimental Platform

The Experimental Platform of OPS-SAT is where experiments will be running. It has two Critical Link MityARM 5CSX in cold redundancy (if one fails, the second one is used). These have a Dual-core 800 MHz

ARM In human anatomy, the arm refers to the upper limb in common usage, although academically the term specifically means the upper arm between the glenohumeral joint (shoulder joint) and the elbow joint. The distal part of the upper limb between th ...

Cortex-A9 processor, an Altera Cyclone V FPGA, 1 GB DDR3 RAM, and an external mass memory device with 8 GB. *

Linux Linux ( or ) is a family of open-source Unix-like operating systems based on the Linux kernel, an operating system kernel first released on September 17, 1991, by Linus Torvalds. Linux is typically packaged as a Linux distribution, whi ...

Java Java (; id, Jawa, ; jv, ꦗꦮ; su, ) is one of the Greater Sunda Islands in Indonesia. It is bordered by the Indian Ocean to the south and the Java Sea to the north. With a population of 151.6 million people, Java is the world's mo ...

* CCSDS File Delivery Protocol (CFDP) * NanoSat MO Framework ESA's aim is to remove as many barriers to experimentation as possible. For example, there will be no paperwork, ESOC's infrastructure will be ready to do automated tests on the experiments, and aims at reducing the overheads close to zero. Additionally, the experiments can be easily developed in form of apps using the NanoSat MO Framework.

NanoSat MO Framework (NMF)

The most innovative concept in OPS-SAT is the deployment of space software in the form of apps. The European Space Agency in collaboration with Graz University of Technology investigated and developed the . The NanoSat MO Framework (NMF) is a software framework for nanosatellites based on CCSDS Mission Operations services. It includes a Software Development Kit (SDK) to develop experiments as NMF Apps which can then be installed, started, and stopped in space. The framework also includes monitoring and control capabilities for the apps which will allow experimenters from the ground to take control of their software when it is running in space. The OPS-SAT system image comes with the NanoSat MO Framework which interfaces with all of the OPS-SAT payload systems and provides it in the form of services to the experimenter application. The NanoSat MO Framework allows simple integration of other libraries and applications. During the development of the experiments, the NMF SDK can be used and it includes a simulator, providing most of the platform functionalities accessible to the experimenter. The simulator allows developers to make their NMF Apps without the need to access an advanced satellite testbed hardware platform. On the ground, EUD4MO will provide a web-based solution for the monitoring and control of NMF Apps. OPS-SAT experimenters will be able to take control using their web browser.

References

External links

OPS-SAT Evolving Software Technology for Spacecraft Operations
{{Orbital launches in 2019 Spacecraft launched in 2019 CubeSats European Space Agency satellites Technology demonstrations

Payload and communications

Experimental Platform

NanoSat MO Framework (NMF)

See also

References

External links