Original motorway viaduct
Opened on 29 May 1963, by Ernest Marples, the Minister of Transport, the first Medway crossing formed a key element of the new M2 motorway (Great Britain), M2 motorway. Built at a cost of £2.5 million, invitations to Invitation to tender, tender for the bridge's construction were sought in 1959. It consists of three main spans. The largest over the River Medway spans 500ft, and the other two are 313ft each. There are seventeen smaller spans of 100 to 135ft. As originally built, the first bridge carried a six-lane (two London-bound, two coast-bound, two hard shoulder) formation. In addition, a footpath was present along either side of the road lanes that doubled as a small service road for maintenance personnel and pedestrians alike. These footpaths formed part of the North Downs Way, which offered panoramic views of the Medway Valley and beyond. Central crash barriers were not originally fitted, but were subsequently retrofitted for safety reasons. During the widening of the M2 from two lanes to four, which was undertaken in the late 1990s and early 2000s, the original bridge was subject to extensive refurbishment and strengthening measures. The original central span, which was made from concrete beams, was replaced with steel girders. The concrete beams were broken up on-site using high pressure water-cutting equipment prior to disposal. Various safety improvements were also implemented across the original bridge, including new steel crash barriers, in late 2006. On 29 May 2013, the M2 celebrated its 50th anniversary. During the summer of 2019, eleven closures of the bridge over the course of three months were necessitated while work to repair multiple bridge joints across the structure was underway.Second motorway viaduct
Completed during 2003, the second motorway bridge is the newest of the three crossings that traverse the River Medway at this point. It was built as part of the M2 widening project, the structure being located south of the original bridge. Its construction benefitted from work to build the adjacent High Speed One railway, such as the reuse of Earthworks (engineering), spoil from the North Downs Tunnel to build up the new London-bound road embarkment leading to the bridge. As a result of the new motorway viaduct's completion, the formation of the M2 motorway crossing was changed; the layout of the original bridge being reordered into three coast-bound lanes, along with a hard shoulder, while both footpaths were reduced in size, including the permanent closure of the south facing footpath, leaving only one path available for pedestrians. The newer of the two bridges was built from the onset with an identical formation, but instead carries the motorway's London-bound lanes.Railway viaduct
The western bridge carries High Speed 1 (HS1), the high-speed rail link that connects London with the Channel Tunnel. The rail viaduct is a long structure that spans the River Medway, Wouldham Road and Burham Roads in Borstal, Rochester, Borstal. It is a multi-span structure, with typical approach spans of , while the central navigation span had a length of . On account of the central span having been designed with a balanced cantilever approach, this necessitated the use of certain techniques in its construction, which included the launching of the side spans in an incremental fashion from both the east and west abutments using a series of hydraulic rams. To withstand this, the bridge deck sections were fabricated using bonded prestressing construction; when positioned correctly, these sections cantilever together, aided by external prestressing for its continuity. The substructure consists of reinforced concrete pier columns that are supported upon deep foundation, bored piles. One distinct feature of the columns is that they are in a "V" shape, which provide greater lateral support and stability, particularly in the event of two high-speed trains deploying their emergency brakes at high speeds while traversing the structure. The structure was designed with several unique features so it could properly accommodate rail movements, including articulation (architecture), articulation and numerous movement joints. It was also designed to give a broadly similar appearance to the existing viaducts where they run parallel to one another, which includes matching spans and profiles. In 2003, it was awarded the Concrete Society’s Civil Engineering Category award for "outstanding merit in the use of concrete" in a presentation to Doka UK Formwork Technologies. A plaque marking this achievement has been attached to one of the upright support legs on the Strood side of the viaduct. The rail viaduct has been described as being a leading piece of civil engineering for the new line, and has become a prominent symbol of it. On 30 July 2003, a specially formed Eurostar train crossed the viaduct and in to the Nashenden Valley at , an occurrence that established a new speed record on the British railway network. In advance of the tenth anniversary of this record-breaking run, a plaque was placed at a nearby vantage point overlooking the railway viaduct.References
Citations
Bibliography
* Collis, HughExternal links