Langley Research Center
   HOME

TheInfoList



OR:

The Langley Research Center (LaRC or NASA Langley), located in Hampton,
Virginia Virginia, officially the Commonwealth of Virginia, is a state in the Mid-Atlantic and Southeastern regions of the United States, between the Atlantic Coast and the Appalachian Mountains. The geography and climate of the Commonwealth are ...
,
United States of America The United States of America (U.S.A. or USA), commonly known as the United States (U.S. or US) or America, is a country primarily located in North America. It consists of 50 states, a federal district, five major unincorporated territo ...
, is the oldest of
NASA The National Aeronautics and Space Administration (NASA ) is an independent agency of the US federal government responsible for the civil space program, aeronautics research, and space research. NASA was established in 1958, succeedin ...
's field centers. It directly borders Langley Air Force Base and the Back River on the
Chesapeake Bay The Chesapeake Bay ( ) is the largest estuary in the United States. The Bay is located in the Mid-Atlantic region and is primarily separated from the Atlantic Ocean by the Delmarva Peninsula (including the parts: the Eastern Shore of Maryland / ...
. LaRC has focused primarily on
aeronautical Aeronautics is the science or art involved with the study, design, and manufacturing of air flight–capable machines, and the techniques of operating aircraft and rockets within the atmosphere. The British Royal Aeronautical Society identifies ...
research, but has also tested space hardware such as the Apollo Lunar Module. In addition, many of the earliest high-profile space missions were planned and designed on-site. Langley was also considered a potential site for NASA's Manned Spacecraft Center prior to the eventual selection of
Houston Houston (; ) is the most populous city in Texas, the most populous city in the Southern United States, the fourth-most populous city in the United States, and the sixth-most populous city in North America, with a population of 2,304,580 ...
,
Texas Texas (, ; Spanish: ''Texas'', ''Tejas'') is a state in the South Central region of the United States. At 268,596 square miles (695,662 km2), and with more than 29.1 million residents in 2020, it is the second-largest U.S. state by ...
. Established in 1917 by the National Advisory Committee for Aeronautics (NACA), the research center devotes two-thirds of its programs to aeronautics and the rest to
space Space is the boundless three-dimensional extent in which objects and events have relative position and direction. In classical physics, physical space is often conceived in three linear dimensions, although modern physicists usually consi ...
. LaRC researchers use more than 40
wind tunnel Wind tunnels are large tubes with air blowing through them which are used to replicate the interaction between air and an object flying through the air or moving along the ground. Researchers use wind tunnels to learn more about how an aircraft ...
s to study and improve
aircraft An aircraft is a vehicle that is able to flight, fly by gaining support from the Atmosphere of Earth, air. It counters the force of gravity by using either Buoyancy, static lift or by using the Lift (force), dynamic lift of an airfoil, or in ...
and
spacecraft A spacecraft is a vehicle or machine designed to fly in outer space. A type of artificial satellite, spacecraft are used for a variety of purposes, including communications, Earth observation, meteorology, navigation, space colonization, ...
safety, performance, and efficiency. Between 1958 and 1963, when NASA (the successor agency to NACA) started Project Mercury, LaRC served as the main office of the Space Task Group. In September 2019, after previously serving as associate director and deputy director, Clayton P. Turner was appointed director of NASA Langley.


History

After US-German relations had deteriorated from neutral to hostile around 1916, the prospect of U.S. war entry became possible. On February 15, 1917, the newly established Aviation Week warned that the U.S. military aviation capability was less than what was operating in the European war. President
Woodrow Wilson Thomas Woodrow Wilson (December 28, 1856February 3, 1924) was an American politician and academic who served as the 28th president of the United States from 1913 to 1921. A member of the Democratic Party, Wilson served as the president of ...
sent Jerome Hunsaker to Europe to investigate, and Hunsaker's report prompted Wilson to command the creation of the nation's first aeronautics laboratory, which became NASA Langley. In 1917, less than three years after it was created, the NACA established the Langley Memorial Aeronautical Laboratory on Langley Field. Both Langley Field and the Langley Laboratory are named for aviation pioneer Samuel Pierpont Langley. The Aviation Section, U.S. Signal Corps had established a base there earlier that same year. The first research facilities were in place and aeronautical research was started by 1920. Initially, the laboratory included four researchers and 11 technicians. Langley Field and NACA began parallel growth as air power proved its utility during World War I. The center was originally established to explore the field of aerodynamic research involving airframe and propulsion engine design and performance. In 1934 the world's largest wind tunnel was constructed at Langley Field with a test section; it was large enough to test full-scale aircraft. It remained the world's largest wind tunnel until the 1940s, when a tunnel was built at NASA's Ames Research Center in California. The
West Area Computers The West Computers (West Area Computing Unit, West Area Computers) were the African American, female mathematicians who worked as human computers at the Langley Research Center of NACA (predecessor of NASA) from 1943 through 1958. These women were ...
were
African American African Americans (also referred to as Black Americans and Afro-Americans) are an ethnic group consisting of Americans with partial or total ancestry from sub-Saharan Africa. The term "African American" generally denotes descendants of ens ...
, female
mathematician A mathematician is someone who uses an extensive knowledge of mathematics in their work, typically to solve mathematical problems. Mathematicians are concerned with numbers, data, quantity, structure, space, models, and change. History On ...
s who worked as human computers at the Langley Research Center from 1943 through 1958. The West Computers were originally subject to Virginia's
Jim Crow laws The Jim Crow laws were state and local laws enforcing racial segregation in the Southern United States. Other areas of the United States were affected by formal and informal policies of segregation as well, but many states outside the S ...
and got their name because they worked at Langley's West Area, while the white mathematicians worked in the East section. Early in 1945, the center expanded to include rocket research, leading to the establishment of a flight station at Wallops Island, Virginia. A further expansion of the research program permitted Langley Research Center to orbit payloads, starting with NASA's
Explorer 9 Explorer 9, known as S-56A before launch, was a NASA satellite which was launched in February 1961 to study the density and composition of the upper thermosphere and lower exosphere. It was a reflight of the failed Explorer S-56 mission, and ...
balloon satellite A balloon satellite is inflated with gas after it has been put into orbit. It is also occasionally referred to as a "satelloon", which is a trademarked name owned by Gilmore Schjeldahl's G.T. Schjeldahl Company. List of balloon satellites abbr ...
in mid-February 1961. As rocket research grew, aeronautics research continued to expand and played an important part when the subsonic flight was advanced and supersonic and hypersonic flight were introduced. Langley Research Center can claim many historic firsts, some of which have proven to be revolutionary scientific breakthroughs. These accomplishments include: Development of the concept of research aircraft leading to supersonic flight, the world's first transonic wind tunnel, training the first crews of astronauts, the Lunar Landing Facility which provides the simulation of lunar gravity, and the Viking program for Mars exploration. The center also developed standards for the grooving of aircraft runways based on a previous British design used at Washington National Airport. Grooved runways reduce aquaplaning which permits better grip by aircraft tires in heavy rain. This grooving is now the international standard for all runways around the world. Langley was also a contender for the site of NASA Mission Control, prior to the eventual selection of Houston, due to Langley's prominence with NASA at the time, the large existing aerospace industry already present in the Hampton Roads region, and the proximity to Washington, D.C. The selection of Houston actually took many higher-ups at Langley by surprise and caused some lingering controversy in the surrounding area over the loss and transfer of so many jobs to Houston. Though they had lost out on the Manned Spacecraft Center, Langley still played an important role in conducting research and training during the Apollo Program.


Aeronautics

Langley Research Center performs critical research on aeronautics, including wake
vortex In fluid dynamics, a vortex ( : vortices or vortexes) is a region in a fluid in which the flow revolves around an axis line, which may be straight or curved. Vortices form in stirred fluids, and may be observed in smoke rings, whirlpools in ...
behavior, fixed-wing aircraft, rotary wing aircraft, aviation safety, human factors and aerospace engineering. LaRC supported the design and testing of the
hypersonic In aerodynamics, a hypersonic speed is one that exceeds 5 times the speed of sound, often stated as starting at speeds of Mach 5 and above. The precise Mach number at which a craft can be said to be flying at hypersonic speed varies, since ind ...
X-43, which achieved a world speed record of . LaRC assisted the NTSB in the investigation of the crash of
American Airlines Flight 587 American Airlines Flight 587 was a regularly scheduled international passenger flight from John F. Kennedy International Airport to Las Américas International Airport in Santo Domingo, the capital of the Dominican Republic. On November 12, 200 ...
. Work began in July 2011 to remove the 1940s era transonic wind tunnel. The facility supported development and propulsion integration research for many military aircraft including all fighters since 1960 ( F-14,
F-15 The McDonnell Douglas F-15 Eagle is an American twin-engine, all-weather tactical fighter aircraft designed by McDonnell Douglas (now part of Boeing). Following reviews of proposals, the United States Air Force selected McDonnell Douglas's ...
,
F-16 The General Dynamics F-16 Fighting Falcon is a single-engine multirole fighter aircraft originally developed by General Dynamics for the United States Air Force (USAF). Designed as an air superiority day fighter, it evolved into a successf ...
, F-18 and the Joint Strike Fighter) but had been inactive since 2004. Langley retained transonic wind tunnel testing capabilities facilities in the National Transonic Facility, a high pressure, cryogenically cooled closed loop wind tunnel.


Fabrication research and development


Electron-beam freeform fabrication (EBF³)

Electron-beam freeform fabrication (EBF3) is an additive manufacturing process that builds
near-net-shape Near-net-shape is an industrial manufacturing technique. As the name implies, the initial production of the item is very close to the final, or ''net'', shape. This reduces the need for surface finishing. By minimizing the use of finishing method ...
parts. Additive manufacturing encompasses processes in which parts are built by successively adding material rather than by cutting or grinding it away as in conventional machining, similar to 3d printing. In the 1990s, development was primarily done by Karen Taminger, a material research engineer at NASA LaRC. Since 2000, a team of researchers at the NASA LaRC have led the fundamental research and development of this technique for additive manufacturing for metallic aerospace structures. Benefits of the EBF³ process include increased strength and reduced material usage. The technique has the ability to build functionally graded unitized parts directly from
CAD Computer-aided design (CAD) is the use of computers (or ) to aid in the creation, modification, analysis, or optimization of a design. This software is used to increase the productivity of the designer, improve the quality of design, improve c ...
. Recently, LaRC has become home to this type of machining process, which is used by their room-sized High Frequency ,
X-ray An X-ray, or, much less commonly, X-radiation, is a penetrating form of high-energy electromagnetic radiation. Most X-rays have a wavelength ranging from 10 picometers to 10  nanometers, corresponding to frequencies in the range 30&nb ...
emitting
electron The electron ( or ) is a subatomic particle with a negative one elementary electric charge. Electrons belong to the first generation of the lepton particle family, and are generally thought to be elementary particles because they have n ...
gun (similar to
Cathode Ray Tube A cathode-ray tube (CRT) is a vacuum tube containing one or more electron guns, which emit electron beams that are manipulated to display images on a phosphorescent screen. The images may represent electrical waveforms ( oscilloscope), ...
s). This quickly melts either
aluminum Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. It ha ...
or
titanium Titanium is a chemical element with the symbol Ti and atomic number 22. Found in nature only as an oxide, it can be reduced to produce a lustrous transition metal with a silver color, low density, and high strength, resistant to corrosion i ...
wire (positioned by dual independent wire feeders) into the desired 3-dimensional metallic parts with a material strength comparable to that of wrought products. Metallic parts are also built directly from
CAD Computer-aided design (CAD) is the use of computers (or ) to aid in the creation, modification, analysis, or optimization of a design. This software is used to increase the productivity of the designer, improve the quality of design, improve c ...
without molds or tools, leaving the end product with very low
porosity Porosity or void fraction is a measure of the void (i.e. "empty") spaces in a material, and is a fraction of the volume of voids over the total volume, between 0 and 1, or as a percentage between 0% and 100%. Strictly speaking, some tests measur ...
.


Plastic fabrication

LaRC also houses a large collection of various inexpensive plastic reformation machines. These machines are used in the freeform fabrication department for faster timing, better precision, and larger quantities of low-cost toy, model, and industrial plastic parts. The fabrication of plastic parts is similar to the EBF³ process, but with a thin, grated heating element as its melting apparatus. Both are run by CAD data and deal with various freeform fabrication of raw materials.


Astronautics


Moon

Since the start of
Project Gemini Project Gemini () was NASA's second human spaceflight program. Conducted between projects Mercury and Apollo, Gemini started in 1961 and concluded in 1966. The Gemini spacecraft carried a two-astronaut crew. Ten Gemini crews and 16 individual ...
, Langley was a center for training of rendezvous in space. In 1965, Langley opened the
Lunar Landing Research Facility The Lunar Landing Research Facility was an area at NASA's Langley Research Center in Hampton, Virginia that was used to simulate Apollo Moon landings with a mock Lunar Module powered by a small rocket motor suspended from a crane over a simulated ...
for simulations of Moon landings with a mock Apollo Lunar Module suspended from a gantry over a simulated lunar landscape. There was experimental work on some Lunar Landing Research Vehicles (LLRV).


Mars

Langley Research Center supported NASA's mission with the designing of a spacecraft for a landing on Mars. (see the Mars Exploration Rover.)


Earth science

Langley Research Center conducts
Earth science Earth science or geoscience includes all fields of natural science related to the planet Earth. This is a branch of science dealing with the physical, chemical, and biological complex constitutions and synergistic linkages of Earth's four sphere ...
research to support NASA's mission.


Awards

LRC scientists and engineers have won the
Collier Trophy The Robert J. Collier Trophy is an annual aviation award administered by the U.S. National Aeronautic Association (NAA), presented to those who have made "the greatest achievement in aeronautics or astronautics in America, with respect to ...
5 times, listed below. * 1929: for the development of low-drag cowling for radial air-cooled aircraft engines. * 1946: to Lewis A. Rodert,
Lawrence D. Bell Lawrence Dale "Larry" Bell (April 5, 1894 – October 20, 1956) was an American industrialist and founder of Bell Aircraft Corporation. Biography Bell was born in Mentone, Indiana, and lived there until 1907, when his family moved to Santa Monic ...
and Chuck Yeager for the development of an efficient wing deicing system. * 1947: to John Stack of the then Langley Memorial Aeronautical Laboratory for research to determine the physical laws affecting supersonic flight. Lawrence D. Bell and Chuck Yeager also shared in this trophy for their work on supersonic flight. * 1951: to John Stack for the development and use of the slotted-throat wind tunnel. * 1954: to Richard T. Whitcomb for the development of the Whitcomb area rule, according to the citation, a "powerful, simple, and useful method of reducing greatly the sharp increase in wing drag heretofore associated with transonic flight, and which constituted a major factor requiring great reserves of power to attain supersonic speeds."


See also

* Aerospace engineering * NASA field centers and other facilities *
TsAGI The Central Aerohydrodynamic Institute (also (Zhukovsky) Central Institute of Aerodynamics, russian: Центра́льный аэрогидродинами́ческий институ́т, ЦАГИ, Tsentral'nyy Aerogidrodinamicheskiy Institut, ...
Russia's equivalent test center and research institute


References


External links


Langley Research Center website

Langley Archives Collection
at Cultural Resources Geographical Information Systems (CRGIS), NASA

* ttps://history.nasa.gov/SP-4316.pdf ''Crafting Flight: Aircraft Pioneers and the Contributions of the Men and Women of NASA Langley Research Center'' (NASA SP-2003-4316)
''Engineer in Charge: A History of the Langley Aeronautical Laboratory,1917–1958'' (NASA SP-4305, 1987)


* Historic American Engineering Record documentation (all located in Hampton, Independent City, VA): ** ** ** ** ** ** ** {{coord, 37.0925, -76.3825, type:landmark_region:US-VA, display=title Aerospace research institutes Aviation research institutes Buildings and structures in Hampton, Virginia Historic American Engineering Record in Virginia National Register of Historic Places in Hampton, Virginia Space technology research institutes Superfund sites in Virginia 1917 establishments in Virginia NASA research centers