Lanchester submachine gun
   HOME

TheInfoList



OR:

The Lanchester is a submachine gun (SMG) manufactured by the Sterling Armaments Company between 1941 and 1945. It is a copy of the German MP28/II and was manufactured in two versions, Mk.1 and Mk.1*; the latter was a simplified version of the original Mk.1, with no fire selector and simplified sights. It was primarily used by the
Royal Navy The Royal Navy (RN) is the United Kingdom's naval warfare force. Although warships were used by English and Scottish kings from the early medieval period, the first major maritime engagements were fought in the Hundred Years' War against ...
during the
Second World War World War II or the Second World War, often abbreviated as WWII or WW2, was a world war that lasted from 1939 to 1945. It involved the vast majority of the world's countries—including all of the great powers—forming two opposi ...
, and to a lesser extent by the
Royal Air Force Regiment The Royal Air Force Regiment (RAF Regiment) is part of the Royal Air Force and functions as a specialist corps. Founded by royal warrant in 1942, the Corps carries out soldiering tasks relating to the delivery of air power. Examples of such t ...
(for airfield protection). It was given the general designation of Lanchester after George Herbert Lanchester, who was charged with producing the weapon at the Sterling Armaments Company.


History

Following the Dunkirk evacuation in 1940, the
Royal Air Force The Royal Air Force (RAF) is the United Kingdom's air and space force. It was formed towards the end of the First World War on 1 April 1918, becoming the first independent air force in the world, by regrouping the Royal Flying Corps (RFC) an ...
decided it required a submachine gun for
airfield An aerodrome ( Commonwealth English) or airdrome (American English) is a location from which aircraft flight operations take place, regardless of whether they involve air cargo, passengers, or neither, and regardless of whether it is for pub ...
defence. With no time available for the usual research and development of a new weapon, it was decided to create a direct copy of the German MP 28. The British Admiralty decided to join with the RAF in adopting the new weapon, and played a key role in its design. Ultimately, it was within the Royal Navy that most of the Lanchesters that were produced went into service. The British copy of the MP28 was given the general designation of Lanchester after George Herbert Lanchester, who was charged with producing the weapon at the Sterling Armaments Company, the same company that later produced the Sterling submachine gun. The Lanchester was envisioned as a weapon used for guarding prisoners and accompanying naval landing and assault parties. It was a very solid, well-made submachine gun of high-quality materials, in many ways the complete opposite of its direct contemporary, the
Sten The STEN (or Sten gun) is a family of British submachine guns chambered in 9×19mm which were used extensively by British and Commonwealth forces throughout World War II and the Korean War. They had a simple design and very low production cos ...
. The Lanchester had a heavy wooden butt and stock, a machined-steel action and breech block, a magazine housing made from solid
brass Brass is an alloy of copper (Cu) and zinc (Zn), in proportions which can be varied to achieve different mechanical, electrical, and chemical properties. It is a substitutional alloy: atoms of the two constituents may replace each other wit ...
(later steel) and a mounting on the muzzle for use of a long-bladed 1907 bayonet. The rifling differed from the German original in details to accommodate various lots of 9mm ammunition then being acquired for service use. Produced in two versions, Mk.1 and Mk.1*. The Mk.1* was a simplified version of the original Mk.1, which omitted the fire mode selector (full automatic only) and used simplified sights.


Production

The first contract of 13 June 1941 produced an initial 50,000 Lanchesters that were nearly all for the Royal Navy use. The British Army by now had supplies of the US-produced Thompson SMG. The final contract was issued on 9 October 1943. Production averaged 3,410 units per month over 28 months. According to contract records, Sterling was to have made guns serially numbered from 1 to 9999, then (S) A1 to about A64580. Certain numbers of Mk.1 were modified later in the war and designated Mk.1*, the key differences being the removal of the fire-selector switch and addition of simplified rear sights. This modification makes it difficult to ascertain exactly the production runs for each model. There were four Lanchester assembly plants, though Lanchester assembly contracts were actually awarded to only three firms. Sterling assembly of the Lanchester was split between the Sterling Engineering Company Ltd in Dagenham (code S109), and the Sterling Armaments Company in Northampton (code M619). Quantities produced: *Sterling (two factories; codes S109 and M619): approx. 74,579. * Greener (code M94): approx. 16,990. *Boss (code S156): approx. 3,900. Some early version do not appear to be code marked at all except by the serial number prefix of "S", "A", or "SA". Pieces marked with the "A" prefix lacked perfect interchangeability and often required hand fitting of components.


Markings

The year of manufacture of any particular Lanchester can be found stamped in small almost indistinguishable numbers next to the crossed flags military proof mark on the top of the rearmost magazine housing flange. Sterling-made MK.1 Lanchester guns are marked on top of the magazine housing as follows: *LANCHESTER *MK.I *SA. *XXXX ("S" indicates Sterling manufacture and "A" indicates serial number prefix)


Operation

The Lanchester is an open-bolt, self-loading blowback-operated weapon with a
selective-fire Selective fire is the capability of a weapon to be adjusted to fire in semi-automatic, fully automatic, and/or burst mode. The modes are chosen by means of a selector switch, which varies depending on the weapon's design. Some selective-fire we ...
option (located in front of the trigger) on early versions. A tubular receiver was attached to the front of the wooden stock, which could be pivoted barrel down for maintenance and disassembly. The wooden stock was patterned after that of
Lee–Enfield rifle The Lee–Enfield or Enfield is a bolt-action, magazine-fed repeating rifle that served as the main firearm of the military forces of the British Empire and Commonwealth during the first half of the 20th century, and was the British Army's sta ...
, and a bayonet lug centred below the muzzle accepted the Pattern 1907 sword-bayonet as used on the Lee–Enfield No. 1 Mk. III* (previously called the S.M.L.E.) It used a straight 50-round magazine containing 9×19mm Parabellum cartridges (special pouches were produced to hold three magazines each) which fit into the magazine housing from the left, with spent cartridges ejected on the right. It was interchangeable with the shorter 32-round Sten magazine. A magazine loading tool was needed to load both 32- and 50-round magazines more easily. One of the two magazine pouches had a special pocket on the front for this loader. Mk.1s featured a front blade sight with adjustable rifle-type sights, marked between 100 and 600 yards. Mk.1* featured a much simplified flip-up sight marked 100 or 200 yards. Manual safety is made in the form of locking cut, made in the receiver, which engages the bolt handle to lock bolt in open (cocked) position. It proved notoriously susceptible to accidental discharge if the weapon were dropped. For cleaning, the weapon had a brass oiler bottle and pull through held inside the butt stock (similar to the Lee–Enfield rifle).


Service

The Lanchester gave good service to the Royal Navy,
Royal Canadian Navy The Royal Canadian Navy (RCN; french: Marine royale canadienne, ''MRC'') is the naval force of Canada. The RCN is one of three environmental commands within the Canadian Armed Forces. As of 2021, the RCN operates 12 frigates, four attack submar ...
and other Commonwealth navies throughout the war and for some decades after. The last examples left Royal Naval service in the 1970s and are now collectors' items. A large number of Lanchesters were subsequently sold off to foreign nations. These are often marked with two
broad arrow A broad arrow, of which a pheon is a variant, is a stylised representation of a metal arrowhead, comprising a tang and two barbs meeting at a point. It is a symbol used traditionally in heraldry, most notably in England, and later by the Britis ...
s, point-to-point (appearing as a six-pointed star), stamped just before the serial number. This symbol is sometimes accompanied by the letter "S" and denotes "Sold out of Service".


Users

* * * * * *: Used by the Constitutionalists in the
Dominican Civil War The Dominican Civil War (), also known as the April Revolution (), took place between April 24, 1965, and September 3, 1965, in Santo Domingo, Dominican Republic. It started when civilian and military supporters of the overthrown democraticall ...
of 1965. * * Hellenic Navy *:Retired. * ** * *


See also

*
Sten The STEN (or Sten gun) is a family of British submachine guns chambered in 9×19mm which were used extensively by British and Commonwealth forces throughout World War II and the Korean War. They had a simple design and very low production cos ...
* PPSh-41


References


External links


Lanchester Mark 1 SMG (British)
image at Security Arms

at Modern Firearms * {{BritishEmpireWeapons Submachine guns of the United Kingdom World War II infantry weapons of the United Kingdom World War II submachine guns Infantry weapons of the Cold War 9mm Parabellum submachine guns Weapons and ammunition introduced in 1941