HOME
The Info List - Inline-four Engine


--- Advertisement ---



The inline-four engine or straight-four engine is a type of inline internal combustion four-cylinder engine with all four cylinders mounted in a straight line, or plane along the crankcase. The single bank of cylinders may be oriented in either a vertical or an inclined plane with all the pistons driving a common crankshaft. Where it is inclined, it is sometimes called a slant-four. In a specification chart or when an abbreviation is used, an inline-four engine is listed either as I4 or L4 (for longitudinal, to avoid confusion between the digit 1 and the letter I). The inline-four layout is in perfect primary balance and confers a degree of mechanical simplicity which makes it popular for economy cars.[1] However, despite its simplicity, it suffers from a secondary imbalance which causes minor vibrations in smaller engines. These vibrations become more powerful as engine size and power increase, so the more powerful engines used in larger cars generally are more complex designs with more than four cylinders. Today almost all manufacturers of four-cylinder engines for automobiles produce the inline-four layout, with Subaru and Porsche 718[2] flat-four engines being notable exceptions, and so four-cylinder is usually synonymous with and a more widely used term than inline-four. The inline-four is the most common engine configuration in modern cars, while the V6 engine
V6 engine
is the second most popular.[3] In the late 2000s (decade), due to stringent government regulations mandating reduced vehicle emissions and increased fuel efficiency, the proportion of new vehicles sold in the U.S. with four-cylinder engines (largely of the inline-four type) rose from 30 percent to 47 percent between 2005 and 2008, particularly in mid-size vehicles where a decreasing number of buyers have chosen the V6 performance option.[4][5]

Contents

1 Displacement 2 Balance and smoothness

2.1 Piston
Piston
speed 2.2 Balance shaft
Balance shaft
use 2.3 Non-overlapping power strokes 2.4 Advantages

3 Automobile
Automobile
use

3.1 Notable production inline-four engines 3.2 Racing use

4 Motorcycle use 5 Notes 6 References 7 Sources

Displacement[edit] This inline engine configuration is the most common in cars with a displacement up to 3.0 L. In practice, the displacement of inline-four petrol engines in cars rarely exceeds this figure. For example, the largest engine of this form on the U.S. market in model year 2015 is the Toyota
Toyota
2TR-FE, which is available in the Toyota Tacoma.[6] However, there are some notable exceptions. Porsche
Porsche
used a 3.0 L four in its 944 S2 and 968 sports cars, the Chevrolet Colorado came with a 2.9 L inline four, the International Harvester Scout was available with a 3.2 L inline four from 1965 until 1980 and Rolls-Royce produced several inline-four engines of 2,838 cc with basic cylinder dimensions of 3.5 in (89 mm) diameter and 4.5 in (110 mm) stroke (Rolls-Royce B40). Early vehicles also tended to have engines with larger displacements to develop horsepower and torque. The Model A Ford was built with a 3.3 L inline-four engine. Inline-four diesel engines, which are lower revving than gasoline engines, often exceed 3.0 L. Mitsubishi
Mitsubishi
still employs a 3.2 L inline-four turbodiesel in its Pajero
Pajero
(called the Shogun or Montero in certain markets), and several manufacturers of light commercial vehicles and large four-wheel drive vehicles, such as Fiat Powertrain Technologies, Isuzu, Nissan, Tata Motors, and Toyota
Toyota
employ a 3.0 L inline-four diesel. Larger inline-four engines are used in industrial applications, such as in small trucks and tractors, are often found with displacements up to about 5 L. Diesel engines for stationary, marine and locomotive use (which run at low speeds) are made in much larger sizes. Generally, European and Asian manufacturers of trucks with a gross vehicle weight rating between 7.5 and 18 tonnes use inline four-cylinder diesel engines with displacements around 5 L. The MAN D0834 engine is a 4.6 L inline-4 with 220 hp (164 kW) and 627 lb⋅ft (850 N⋅m), which is available for the MAN TGL light-duty truck and VARIOmobil motorhomes.[7][8][9] The Isuzu
Isuzu
Forward is a medium-duty truck which is available with a 5.2 L inline-four engine that delivers 210 hp (157 kW) and 470 lb⋅ft (640 N⋅m).[10][11] The Hino Ranger
Hino Ranger
is a medium-duty truck which is available with a 5.1 L inline-four engine that delivers 175 hp (130 kW) and 465 lb⋅ft (630 N⋅m).[12][13] The earlier Hino Ranger
Hino Ranger
even had a 5.3 L inline-four engine.[14][15] The Kubota M135X is a tractor with a 6.1 L inline-four. This turbo-diesel engine has a bore of 118 mm (4.6 in) and a relatively long stroke of 140 mm (5.5 in).[16][17][18] One of the strongest Powerboat-4-cylinders is the Volvo Penta
Volvo Penta
D4-300 turbodiesel. This is a 3.7 L-inline-4 with 300 hp (224 kW) and 516 lb⋅ft (700 N⋅m).[19][20][21] Brunswick Marine built a 127 kW (170 bhp) 3.7 L 4-cylinder gasoline engine (designated as the "470") for their Mercruiser
Mercruiser
Inboard/outboard line. The block was formed from one half of a Ford 460 cubic inch V8 engine. This engine was produced in the 1970s and 1980s.[citation needed] One of the largest inline-four engines is the MAN B&W 4K90 marine engine. This two-stroke turbo-diesel has a giant displacement of 6,489 L. This results from a massive 0.9 meter bore and 2.5 meter stroke. The 4K90 engine develops 18,280 kW (24,854 PS; 24,514 hp) at 94 rpm and weighs 787 tons.[22] The largest on-road inline-4 cylinder turbo-diesel engine is the Detroit Diesel
Detroit Diesel
Series 50, with a displacement of 8.5 L. It is widely used in various applications such as buses, trucks, and more. Power ratings varied from 250 hp to 350 hp. It was manufactured from 1994, until 2005. The Series 50 was also marketed as the Series 50G, for its CNG and LNG versions. Displacement can also be very small, as found in kei cars sold in Japan, such as the Subaru EN series; engines that started out at 550 cc and are currently at 660 cc, with variable valve timing, DOHC
DOHC
and superchargers resulting in engines that often claim the legal maximum of 64 PS (47 kW; 63 bhp). The 1.2 L, turbocharged, direct-injected, Toyota
Toyota
8NR-FTS engine has a maximum power output of 114 hp (85 kW) and a maximum torque of 190 Nm (140 lbft) at a low rpm (1500 rpm). Balance and smoothness[edit]

Computer generated image showing the major internal moving parts of an inline-four engine with belt-driven double overhead camshafts and 4 valves per cylinder.

The inline-four engine is much smoother than one- or two-cylinder engines, and this has resulted in it becoming the engine of choice for most economy cars for many years. Its prominent advantage is the lack of rocking vibration, and the lack of need for heavy counterweights makes it easier to be sporty (quick revving up and down). However, it tends to show secondary imbalance at high rpm because two pistons always move together, making the imbalance twice as strong as other configurations without them. Piston
Piston
speed[edit] An even-firing inline-four engine is in primary balance because the pistons are moving in pairs, and one pair of pistons is always moving up at the same time as the other pair is moving down. However, piston acceleration and deceleration is greater in the top half of the crankshaft rotation than in the bottom half, because the connecting rods are not infinitely long, resulting in a non-sinusoidal motion. As a result, two pistons are always accelerating faster in one direction, while the other two are accelerating more slowly in the other direction, which leads to a secondary dynamic imbalance that causes an up-and-down vibration at twice crankshaft speed. This imbalance is common among all piston engines, but the effect is particularly strong on inline-four because of the two pistons always moving together. The reason for the piston's higher speed during the 180° rotation from mid-stroke through top-dead-centre, and back to mid-stroke, is that the minor contribution to the piston's up/down movement from the connecting rod's change of angle here has the same direction as the major contribution to the piston's up/down movement from the up/down movement of the crank pin. By contrast, during the 180° rotation from mid-stroke through bottom-dead-centre and back to mid-stroke, the minor contribution to the piston's up/down movement from the connecting rod's change of angle has the opposite direction of the major contribution to the piston's up/down movement from the up/down movement of the crank pin. The strength of this imbalance is determined by 1. Reciprocating mass, 2. Ratio of connecting rod length to stroke, and 3. Acceleration of piston movement. So small displacement engines with light pistons show little effect, and racing engines use long connecting rods. However, the effect grows exponentially with crankshaft rotational speed. See crossplane article for unusual inline-four configurations. Balance shaft
Balance shaft
use[edit] Most inline-four engines below 2.0 L in displacement rely on the damping effect of their engine mounts to reduce the vibrations to acceptable levels. Above 2.0 L, most modern inline-four engines now use balance shafts to eliminate the secondary vibrations. In a system invented by Dr. Frederick W. Lanchester
Frederick W. Lanchester
in 1911, an inline-four engine uses two balance shafts, rotating in opposite directions at twice the crankshaft's speed, to offset the differences in piston speed.[23] In the 1970s, Mitsubishi
Mitsubishi
Motors patented these balancer shafts to be located at different heights to further counter the rotational vibration created by the left and right swinging motion of connecting rods.[note 1] Porsche, who used this technology on Porsche 944, and other car makers bought the license to this patent. However, in the past, there were numerous examples of larger inline-fours without balance shafts, such as the Citroën DS
Citroën DS
23 2,347 cc engine that was a derivative of the Traction Avant engine, the 1948 Austin 2,660 cc engine used in the Austin-Healey 100 and Austin Atlantic, the 3.3 L flathead engine used in the Ford Model A (1927), and the 2.5 L GM Iron Duke engine
GM Iron Duke engine
used in a number of American cars and trucks. Soviet/Russian GAZ Volga cars and UAZ
UAZ
SUVs, vans and light trucks used aluminium big-bore inline-four engines (2.5 or later 2.9 L) with no balance shafts from the 1950s-1990s. These engines were generally the result of a long incremental evolution process and their power was kept low compared to their capacity. However, the forces increase with the square of the engine speed — that is, doubling the speed makes the vibration four times more forceful — so some modern high-speed inline-fours, generally those with a displacement greater than 2.0 litres, have more need to use balance shafts to offset the vibration.[24] Non-overlapping power strokes[edit]

Animation of an Inline-four engine

Four-cylinder engines also have a smoothness problem in that the power strokes of the pistons do not overlap. With four cylinders and four strokes to complete in the four-stroke cycle, each piston completes its power stroke before the next piston starts a new power stroke, resulting in a pause between each power stroke and a pulsating delivery of power. In engines with more cylinders, the power strokes overlap, which gives them a smoother delivery of power and less torsional vibration than a four can achieve. As a result, five-, six-, eight-, ten- and twelve-cylinder engines are generally used in more luxurious and expensive cars. Advantages[edit] 4-cylinder engines, often derided as "four bangers" do offer some advantages; an alloy block inline four is usually small, compact and lightweight, which serves to decrease overall vehicle mass, usually resulting in an increase in fuel efficiency in the urban cycle. The light weight of the inline four also allows for ease of removal and installation when maintenance or overhaul become necessary. When compared to a V6 or V8, an inline four will generally have somewhat lower frictional losses at a comparable engine speed due to having fewer pistons, connecting rods and bearings, although the lower frictional loss is offset in practice by the inline four's need to operate at a higher RPM compared to a larger engine in order to produce equivalent power. A notable inline 4 engine would be the BMW
BMW
Megatron M12 1.5-litre Formula 1 straight-4 engine, which won the 1983 World Drivers Championship installed in the Brabham BT52 chassis driven by Nelson Piquet. In the second half of the 1983 Formula 1 season, the BMW
BMW
was capable of over 800 BHP in qualifying, while in race trim usually had an output of between 640 BHP to 700 BHP depending on how much boost the drivers used. Automobile
Automobile
use[edit] Notable production inline-four engines[edit]

Ford Model T
Ford Model T
engine

1970 Alfa Romeo
Alfa Romeo
1750 GTV engine

The smallest automobile production inline-four engine powered the 1962-1970 Mazda P360 Carol kei car.[citation needed] Displacing just 358 cc, the Mazda DA was a conventional but tiny pushrod engine. Honda
Honda
produced, from 1963 to 1967, a 356 cc (21.7 cu in) inline-four engine for the T360 truck. Inline-four motorcycle engines are built down to 250 cc, e.g. in the Honda
Honda
CBR250. Most inline-four engines, however, have been over 700 cc (43 cu in) displacement. A practical upper limit could be placed in the 2.5 L range for contemporary production cars. Larger engines (up to 6.1 L) have been seen in tractors (Kubota M135X) and medium duty truck use ( Isuzu
Isuzu
Forward, Hino Ranger), especially using diesel fuel (one of the strongest is the MAN D0834 engine with 220 hp (164 kW) and 627 lb⋅ft (850 N⋅m)[25]). The use of balance shafts allowed Porsche
Porsche
to use a 3.0 L (2,990 cc) inline-four engine on road cars first in the 944 S2, but the largest modern non-diesel was the 3,186 cc (194.4 cu in) Pontiac inline-4 produced from one half of the Division's 6,373 cc (388.9 cu in) V8 for the debut of its 1961 Tempest. The largest mass-produced inline-four engine in a car has currently the Mitsubishi
Mitsubishi
Pajero
Pajero
3.2 DI-D, which has a 3,200 cc inline-four with 165 hp (123 kW) at 3,500 rpm (in Europe, 200 hp) and 381 N⋅m (281 lb⋅ft) at 2,000 rpm. The Engine has a bore of 98.5 mm (3.9 in) and a stroke of 105 mm (4.1 in).[26][27] Currently, one of the largest straight-4 engines in production is General Motors' Vortec 2900 installed in the GMC Canyon and Chevrolet Colorado small pickup trucks. It shares the same 95.5 mm (3.8 in) bore and 102 mm (4.0 in) stroke as the larger inline-five Vortec 3700. The latest version of the Vortec 2900, the LLV, displaces 2.9 L (2921 cc, 178 in³) and produces 185 hp (138 kW) at 5,600 rpm and 195 lb⋅ft (264 N⋅m) at 2,800 rpm. Engine redline is 6,300 rpm. Another example of a large inline-four engine is the Russian 2.89 L UMZ
UMZ
421 series UMZ
UMZ
engine. In the early 20th century, bigger engines existed, both in road cars and sports cars. Due to the absence of displacement limit regulations, manufacturers took increasing liberties with engine size. In order to achieve power over 100 hp (75 kW), most engine builders simply increased displacement, which could sometimes achieve over 10.0 L. The biggest inline-four ever made was the 28.3 L engine used in the 1911 Fiat S76 racing car.[28][29] These engines ran at very low rpm, often less than 1,500 rpm maximum, and had a specific output of about 10 hp/L. The US tractor industry both farm and industrial relied on large four-cylinder power units until the early 1960s, when six-cylinder designs came into favour. International Harvester built a large 5.7-litre (350 CID) four-cylinder for their WD-9 series tractors. Other technologically or historically notable engines using this configuration include:

Alfa Romeo
Alfa Romeo
Twin Cam
Cam
engine - one of the first mass-produced twin cam engines produced from 1954. Also first engine in production car with variable valve timing. BMC A-Series engine
BMC A-Series engine
- the first engine to be used in a transverse drive train powering the front wheels of a mass-produced automobile (Mini). Chevrolet
Chevrolet
Cosworth
Cosworth
Twin- Cam
Cam
Vega - 2.0 L all aluminum (block & head), DOHC, 16 valves, electronic fuel injection, stainless steel header. Dodge
Dodge
A853 - intercooled turbo engine from the SRT-4, set the land speed record for 4-cylinder production cars at the Bonneville Salt Flats. Fiat Twin Cam engine
Fiat Twin Cam engine
- One of the first mass-produced twincam engines, produced from 1959. Ford Model T
Ford Model T
engine - one of the most widely produced engines in the world. GM Quad-4 engine
GM Quad-4 engine
- twin-cam Oldsmobile engine offered in GM small, sporty cars. Honda
Honda
ED engine - first use of Honda's CVCC
CVCC
technology. Honda F20C engine
Honda F20C engine
- its 250 PS (180 kW; 250 hp) from 2.0 L was the highest specific output of its time, particularly noteworthy in that it achieved this without forced induction. Mitsubishi
Mitsubishi
Sirius engine - includes the 4G63, which has the highest specific output of a turbocharged production engine in the world with the Lancer Evolution FQ-400 available in the United Kingdom (202.9 hp/L) Triumph Slant-4 engine
Triumph Slant-4 engine
- the first mass-produced multi-valve engine for Triumph and an early turbo engine for Saab. Willys L-134 engine - nicknamed the Go Devil engine. Powered the World War II Jeep and post-war models. Notably undersquare, with 3.125 in (79.4 mm) bore and 4.375 in (111.1 mm) stroke.

In the late 2000s (decade), with auto manufacturers making efforts to increase fuel efficiency and reduce emissions, due to the high price of oil and the economic recession, the proportion of new vehicles with inline-four engines have increased considerably at the expense of V6 and V8 engines. This is particularly evident in mid-size vehicles where a decreasing number of buyers have chosen the V6 performance options. Racing use[edit]

BMW
BMW
Formula One
Formula One
Engine M12/13, 1500cc turbocharged inline 4

1913 saw a Peugeot
Peugeot
driven by Jules Goux
Jules Goux
winning the Indianapolis 500. This car was powered by an inline-four engine designed by Ernest Henry. This design was very influential for racing engines as it had, for the first time, dual overhead camshafts (DOHC) and four valves per cylinder, a layout that would become the standard until today for racing inline-four engines.[30] This Peugeot
Peugeot
was sold to the American driver "Wild Bob" Burman who broke the engine in 1915. As Peugeot
Peugeot
couldn't deliver a new engine during World War I, Burman asked Harry Arminius Miller
Harry Arminius Miller
to build a new engine. With John Edward and Fred Offenhauser, Miller created a Peugeot-inspired inline-four engine. This was the first version of the engine that would dominate the Indianapolis 500
Indianapolis 500
until 1976 under the brand Miller and later Offenhauser. The Offenhausers won five straight victories at Indianapolis from 1971 to 1976, and it was not until 1981 that they were eliminated as competitors by engines such as the Cosworth
Cosworth
V8 engine.[31] Many cars produced for the pre-WWII voiturette Grand Prix motor racing category used inline-four engine designs. 1.5 L supercharged engines found their way into cars such as the Maserati 4CL
Maserati 4CL
and various English Racing Automobiles
English Racing Automobiles
(ERA) models. These were resurrected after the war, and formed the foundation of what was later to become Formula One, although the straight-eight supercharged Alfettas would dominate the early years of F1. Another engine that played an important role in racing history is the inline-four Ferrari
Ferrari
engine designed by Aurelio Lampredi. This engine was originally designed as a 2 L Formula 2
Formula 2
engine for the Ferrari 500, but evolved to 2.5 L to compete in Formula One
Formula One
in the Ferrari
Ferrari
625.[32] For sports car racing, capacity was increased up to 3.4 L for the Ferrari
Ferrari
860 Monza. Yet another very successful engine was the Coventry Climax
Coventry Climax
inline-four originally designed by Walter Hassan
Walter Hassan
as a 1.5 L Formula 2
Formula 2
engine. Enlarged to 2.0 L for Formula One
Formula One
in 1958, it evolved into the large 2,495 cc FPF that won the Formula One
Formula One
championship in Cooper's chassis in 1959 and 1960.[33] In formula One, the 1980s were dominated by the 1,500 cc turbocharged cars. The BMW
BMW
model M12/13 turbo was notable for the era for its high boost pressures and performance. The cast iron block 4-cylinder turbocharged Formula One
Formula One
motor, based on the standard BMW M10 engine introduced in 1961, powered the F1 cars of Brabham, Arrows and Benetton and won the world championship in 1983. In the years 1986 and 1987, the version M12/13/1 was tilted sideways by 72° for use in the extremely low Brabham BT55. Unfortunately the design was not successful, probably due to cooling issues in the tight compartment. The 1986 engine was said to produce about 1,300 hp (969 kW) in qualifying.[34] Motorcycle use[edit] See also: Motorcycle engine

Honda
Honda
CB750 engine

Belgian arms manufacturer FN Herstal, which had been making motorcycles since 1901, began producing the first motorcycles with inline-fours in 1905.[35] The FN Four
FN Four
had its engine mounted upright with the crankshaft longitudinal. Other manufacturers that used this layout included Pierce, Henderson, Ace, Cleveland, and Indian in the United States, Nimbus in Denmark, Windhoff in Germany, and Wilkinson in the United Kingdom.[36] Modern inline-four motorcycle engines first became popular with Honda's SOHC
SOHC
CB750 introduced in 1969, and others followed in the 1970s. Since then, the inline-four has become one of the most common engine configurations in street bikes. Outside of the cruiser category, the inline-four is the most common configuration because of its relatively high performance-to-cost ratio.[citation needed] All major Japanese motorcycle manufacturers offer motorcycles with inline-four engines, as do MV Agusta
MV Agusta
and BMW. BMW's earlier inline-four motorcycles were mounted horizontally along the frame, but all current four-cylinder BMW
BMW
motorcycles have transverse engines. The modern Triumph company has offered inline-four-powered motorcycles, though they were discontinued in favour of triples. The 2009 Yamaha R1
Yamaha R1
has an inline-four engine that does not fire at even intervals of 180°. Instead, it uses a crossplane crankshaft that prevents the pistons from simultaneously reaching top dead centre. This results in better secondary balance, which is particularly beneficial in the higher rpm range, and "big-bang firing order" theory says the irregular delivery of torque to the rear tire makes sliding in the corners at racing speeds easier to control. Notes[edit]

^ When a connecting rod swings left on the top half of crank rotation, another swings right on the bottom half, with the connecting rod center of gravity (CG) heights located as much as the piston stroke apart. When the CG is located at different heights, the swing motion to the left cannot cancel the swing motion to the right, and a rocking vibration is introduced. By placing the balancer shafts at different heights, this vibration can be cancelled in addition to the cancellation of the secondary vibration.

References[edit]

^ Nunney, Light and Heavy Vehicle Technology, p. 12 ^ "Performance: The new 718 Boxster". Porsche. 2016. Retrieved 2016-11-01.  ^ Nunney, pp. 13-16 ^ Schembari, James (2010-10-15). "A Family Sedan Firing on Fewer Cylinders - 2010 Buick LaCrosse CX - Review". The New York Times.  ^ Ulrich, Lawrence (2010-08-13). "Four-Cylinder Engines Are Smaller, Quieter and Gaining New Respect". The New York Times.  ^ "Model Year 2015 : Fuel Economy Guide" (PDF). Fueleconomy.gov. Retrieved 2017-05-23.  ^ "Archived copy" (PDF). Archived from the original (PDF) on 2011-07-14. Retrieved 2011-08-01.  ^ "MAN Truck
Truck
& Bus
Bus
- TGL". Archived from the original on 2011-05-23. Retrieved 2011-05-09.  ^ "VARIOmobil - Welcome to a lap of luxury coaches - recreation vehicles - motor homes". Archived from the original on 2011-08-27. Retrieved 2011-05-09.  ^ " Isuzu
Isuzu
Commercial Vehicles - Low Cab Forward Trucks - Commercial Vehicles - 4HK1-TC 5.2L Diesel Engine". Archived from the original on 2010-12-24. Retrieved 2010-12-14.  ^ "Archived copy" (PDF). Archived from the original (PDF) on 2010-11-26. Retrieved 2010-12-14.  ^ "Diesel Engines Products". Hino Global. Retrieved 2017-05-23.  ^ "Archived copy" (PDF). Archived from the original (PDF) on 2010-12-14. Retrieved 2010-12-14.  ^ "Archived copy". Archived from the original on 2009-11-13. Retrieved 2010-12-14.  ^ "Archived copy" (PDF). Archived from the original (PDF) on 2011-02-16. Retrieved 2010-12-14.  ^ Stevenson, Terry (2010-08-23). "Kubota M135X tractor". Farmtrader.co.nz. Retrieved 2017-05-23.  ^ "Archived copy". Archived from the original on 2010-12-18. Retrieved 2010-12-15.  ^ "Archived copy". Archived from the original on 2010-12-18. Retrieved 2010-12-14.  ^ "On land and at sea". Volvo Penta. Retrieved 2017-05-23.  ^ [1][dead link] ^ "Archived copy". Archived from the original on 2011-07-07. Retrieved 2011-01-12.  ^ "A comprehensive A-Z listing of marine diesel engines in excess of 300kW" (PDF). Masson-marine.com. Retrieved 2011-11-13.  ^ Nunney, pp. 42-44 ^ Nunney, p. 40-44. ^ "D0834_LKW_dt.indd" (PDF). Retrieved 2011-08-01.  ^ [2][dead link] ^ "MITSUBISHI MOTORS in Deutschland". Mitsubishi-motors.de. 2016-08-16. Archived from the original on 2013-06-06. Retrieved 2017-05-23.  ^ "Goodwood - Video: 28.5-litre Fiat S76 at FoS". Grrc.goodwood.com. Retrieved 2017-05-23.  ^ "Fiat S76 (#1) 28.3 liter 1911". flickr.com. Retrieved 2012-10-22.  ^ Ludvigsen, Classic Racing Engines, pp. 14–17 ^ Ludvigsen, pp. 182-185. ^ Ludvigsen, pp. 78-81, 86-89. ^ Ludvigsen, pp. 130-133. ^ " BMW
BMW
Turbo
Turbo
F1 Engine". Gurneyflap.com. Retrieved 2010-09-13.  ^ Siegal, Margie (May–June 2017). "The Same, But Different: 1927 Cleveland 4-45 and 4-61 Motorcycles". Motorcycle Classics. Retrieved 2017-06-20.  ^ Edwards, David (August 1997). Edwards, David, ed. "Four-Runners". Cycle World. Newport Beach, CA USA: Hachette Filipacchi Magazines. 36 (8): 42–43. ISSN 0011-4286. Retrieved 2013-09-21. 

Sources[edit]

Ludvigsen, Karl (2001). Classic Racing Engines. Haynes Publishing. ISBN 1-85960-649-0.  Nunney, M J (2006). Light and Heavy Vehicle Technology (4th ed.). Butterworth-Heinemann. ISBN 0-7506-8037-7. 

v t e

Reciprocating engines and configurations

Type

Bourke Orbital (Sarich) Piston Pistonless (Wankel) Radial Axial Rotary Split cycle Stelzer Tschudi

Stroke cycles

Two-stroke Four-stroke Five-stroke Six-stroke Two-and four-stroke

Configurations & number of cylinders

Single cylinder

Single

Two cylinders

Split-single I2 V2 F2

Inline / straight

I2 I3 I4 I5 I6 I7 I8 I9 I10 I12 I14

Flat

F2 F4 F6 F8 F10 F12 F16

V / Vee

V2 V3 V4 V5 V6 V8 V10 V12 V14 V16 V18 V20 V24

W

W8 W12 W16 W18

Other inline

H U Square four VR Opposed X X24 Junkers Jumo 222

Components

Valves

Cylinder head porting Corliss Intake Exhaust Multi Overhead Piston Poppet Side Sleeve Slide Rotary valve Variable valve timing Camless Desmodromic Hydraulic tappet

Fuel supplies

Carburetor Gasoline direct injection Common rail

Mechanisms

Cam Camshaft Overhead camshaft Connecting rod Crank Crankshaft Scotch yoke Swashplate Rhombic drive

Linkages

Peaucellier–Lipkin Watt's (parallel)

Other

Hemi Recuperator

.