In telecommunication, a longitudinal redundancy check (LRC), or horizontal redundancy check, is a form of
redundancy check
In information theory and coding theory with applications in computer science and telecommunications, error detection and correction (EDAC) or error control are techniques that enable reliable delivery of digital data over unreliable communi ...
that is applied independently to each of a parallel group of bit streams. The data must be divided into
transmission block In telecommunications, the term transmission block has the following meanings:
#A group of characters or bits transmitted as a block, unit, message, or packet. It usually includes additional encoded characters for error detection and correction.
...
s, to which the additional check data is added.
The term usually applies to a single
parity bit
A parity bit, or check bit, is a bit added to a string of binary code. Parity bits are a simple form of error detecting code. Parity bits are generally applied to the smallest units of a communication protocol, typically 8-bit octets (bytes) ...
per bit stream, calculated independently of all the other bit streams (
BIP-8).
[
: "Reliable link layer protocols".
]
This "extra" LRC word at the end of a block of data is very similar to
checksum
A checksum is a small-sized block of data derived from another block of digital data for the purpose of detecting errors that may have been introduced during its transmission or storage. By themselves, checksums are often used to verify dat ...
and
cyclic redundancy check
A cyclic redundancy check (CRC) is an error-detecting code commonly used in digital networks and storage devices to detect accidental changes to digital data. Blocks of data entering these systems get a short ''check value'' attached, based on ...
(CRC).
Optimal rectangular code
While simple longitudinal
parity can only
detect errors, it can be combined with additional error-control coding, such as a
transverse redundancy check
In telecommunications, a transverse redundancy check (TRC) or vertical redundancy check is a redundancy check for synchronized parallel bits applied once per bit time, across the bit streams. This requires additional parallel channels for the che ...
(TRC), to
correct errors. The transverse redundancy check is stored on a dedicated "parity track".
Whenever any single-bit error occurs in a transmission block of data, such two-dimensional parity checking, or "two-coordinate parity checking",
enables the receiver to use the TRC to detect which byte the error occurred in, and the LRC to detect exactly which track the error occurred in, to discover exactly which bit is in error, and then correct that bit by flipping it.
Pseudocode
International standard ISO 1155 states that a longitudinal redundancy check for a sequence of bytes may be computed in
software
Software consists of computer programs that instruct the Execution (computing), execution of a computer. Software also includes design documents and specifications.
The history of software is closely tied to the development of digital comput ...
by the following algorithm:
''lrc'' := 0
for each byte ''b'' in the buffer do
''lrc'' := (''lrc'' + ''b'') and 0xFF
''lrc'' := (((''lrc'' XOR 0xFF) + 1) and 0xFF)
which can be expressed as "the 8-bit two's-complement value of the sum of all bytes modulo 2
8" (
x AND 0xFF is equivalent to
x MOD 28).
Other forms
Many protocols use an XOR-based longitudinal redundancy check byte (often called
block check character In telecommunications, a block check character (BCC) is a character added to a transmission block to facilitate error detection.
In longitudinal redundancy checking and cyclic redundancy checking, block check characters are computed for, and adde ...
or BCC), including the serial line interface protocol (SLIP, not to be confused with the later and well-known
Serial Line Internet Protocol),
[
.
"A Thinwire Protocol for connecting personal computers to the INTERNET".
Appendix D: "Serial Line Interface Protocol (SLIP)".
]
the
IEC 62056-21 standard for electrical-meter reading, smart cards as defined in
ISO/IEC 7816
ISO/IEC 7816 is an international standard related to electronic identification cards with contacts, especially smart cards, and more recently, contactless mobile devices, managed jointly by the International Organization for Standardization (ISO) ...
, and the
ACCESS.bus protocol.
An 8-bit LRC such as this is equivalent to a
cyclic redundancy check
A cyclic redundancy check (CRC) is an error-detecting code commonly used in digital networks and storage devices to detect accidental changes to digital data. Blocks of data entering these systems get a short ''check value'' attached, based on ...
using the polynomial ''x''
8 + 1, but the independence of the bit streams is less clear when looked at in that way.
References
*
{{ISO standards
Error detection and correction
Articles with example pseudocode
ISO standards