Hexad (computing)

In computing and telecommunications, a unit of information is the capacity of some standard data storage system or communication channel, used to measure the capacities of other systems and channels. In information theory, units of information are also used to measure information contained in messages and the entropy of random variables.

The most commonly used units of data storage capacity are the bit, the capacity of a system that has only two states, and the byte (or octet), which is equivalent to eight bits. Multiples of these units can be formed from these with the SI prefixes (power-of-ten prefixes) or the newer IEC binary prefixes (power-of-two prefixes).

Primary units

In 1928, Ralph Hartley observed a fundamental storage principle, which was further formalized by Claude Shannon in 1945: the information that can be stored in a system is proportional to the logarithm of ''N'' possible states of that system, denoted . Changing the base of the logarithm from ''b'' to a different number ''c'' has the effect of multiplying the value of the logarithm by a fixed constant, namely .
Therefore, the choice of the base ''b'' determines the unit used to measure information. In particular, if ''b'' is a positive and negative numbers, positive integer, then the unit is the amount of information that can be stored in a system with ''b'' possible states.

When ''b'' is 2, the unit is the Shannon (unit), shannon, equal to the information content of one "bit" (a portmanteau of binary digit). A system with 8 possible states, for example, can store up to bits of information. Other units that have been named include:
; Base ''b'' = 3 : the unit is called "ternary numeral system, trit", and is equal to (≈ 1.585) bits.
; Base ''b'' = 10 : the unit is called ''decimal numerical digit, digit'', ''Hartley (unit), hartley'', ''ban'', ''decit'', or ''dit'', and is equal to log₂ 10 (≈ 3.322) bits.
; Base ''b'' = ''e'', the base of natural logarithms : the unit is called a ''nat (unit), nat'', ''nit'', or ''nepit'' (from John Napier, Neperian), and is worth (≈ 1.443) bits.
The trit, ban, and nat are rarely used to measure storage capacity; but the nat, in particular, is often used in information theory, because natural logarithms are mathematically more convenient than logarithms in other bases.

Units derived from bit

Several conventional names are used for collections or groups of bits.

Byte

Historically, a byte was the number of bits used to encode a character (computing), character of text in the computer, which depended on computer hardware architecture; but today it almost always means eight bits – that is, an octet (computing), octet. A byte can represent 256 (2⁸) distinct values, such as non-negative integers from 0 to 255, or two's complement, signed integers from −128 to 127. The IEEE 1541-2002 standard specifies "B" (upper case) as the symbol for byte (IEC 80000-13 uses "o" for octet in French, but also allows "B" in English, which is what is actually being used). Bytes, or multiples thereof, are almost always used to specify the sizes of computer files and the capacity of storage units. Most modern computers and peripheral devices are designed to manipulate data in whole bytes or groups of bytes, rather than individual bits.

Nibble

A group of four bits, or half a byte, is sometimes called a nibble, nybble or nyble. This unit is most often used in the context of hexadecimal number representations, since a nibble has the same amount of information as one hexadecimal digit.

Crumb

A group of two bits or a quarter byte was called a crumb, often used in early 8-bit computing (see Atari 2600, ZX Spectrum). It is now largely defunct.

Word, block, and page

Computers usually manipulate bits in groups of a fixed size, conventionally called ''word (computer architecture), words''. The number of bits in a word is usually defined by the size of the register (computing), registers in the computer's CPU, or by the number of data bits that are fetched from its main memory in a single operation. In the IA-32 architecture more commonly known as x86-32, a word is 16 bits, but other past and current architectures use words with 4, 8, 9, 12, 13, 16, 18, 20, 21, 22, 24, 25, 29, 30, 31, 32, 33, 35, 36, 38, 39, 40, 42, 44, 48, 50, 52, 54, 56, 60, 64, 72 bits or others.

Some machine instructions and computer number formats use two words (a "double word" or "dword"), or four words (a "quad word" or "quad").

Computer memory caches usually operate on ''block (computer memory), blocks'' of memory that consist of several consecutive words. These units are customarily called ''cache blocks'', or, in CPU caches, ''cache lines''.

Virtual memory systems partition the computer's main storage into even larger units, traditionally called ''page (computer memory), pages''.

Systematic multiples

Terms for large quantities of bits can be formed using the standard range of SI prefixes for powers of 10, e.g., kilo-, kilo = 10³ = 1000 (as in kilobit or kbit), mega-, mega = 10⁶ = (as in megabit or Mbit) and giga-, giga = 10⁹ = (as in gigabit or Gbit). These prefixes are more often used for multiples of bytes, as in kilobyte (1 kB = 8000 bit), megabyte (1 MB = ), and gigabyte (1 GB = ).

However, for technical reasons, the capacities of computer memories and some storage units are often multiples of some large power of two, such as 2²⁸ = bytes. To avoid such unwieldy numbers, people have often repurposed the SI prefixes to mean the nearest power of two, e.g., using the prefix ''kilo'' for 2¹⁰ = 1024, ''mega'' for 2²⁰ = , and ''giga'' for 2³⁰ = , and so on. For example, a random access memory chip with a capacity of 2²⁸ bytes would be referred to as a 256-megabyte chip. The table below illustrates these differences.

In the past, uppercase ''K'' has been used instead of lowercase ''k'' to indicate 1024 instead of 1000. However, this usage was never consistently applied.

On the other hand, for external storage systems (such as optical discs), the SI prefixes are commonly used with their decimal values (powers of 10). There have been many attempts to resolve the confusion by providing alternative notations for power-of-two multiples. In 1998 the International Electrotechnical Commission (IEC) issued a standard for this purpose, namely a series of binary prefixes that use 1024 instead of 1000 as the main radix:

The JEDEC memory standards, JEDEC memory standard JESD88F notes that the definitions of kilo (K), giga (G), and mega (M) based on powers of two are included only to reflect common usage.

Size examples

* 1 bit: Answer to a yes/no question
* 1 byte: A number from 0 to 255
* 90 bytes: Enough to store a typical line of text from a book
* 512 bytes = 0.5 KiB: The typical disk sector, sector of a hard disk
* 1024 bytes = 1 KiB: The classical block (data storage), block size in UNIX filesystems
* 2048 bytes = 2 KiB: A CD-ROM sector
* 4096 bytes = 4 KiB: A memory page in x86 (since Intel 80386)
* 4 kB: About one page of text from a novel
* 120 kB: The text of a typical pocket book
* 1 MiB: A 1024×1024 pixel bitmap image with 256 colors (8 bpp color depth)
* 3 MB: A three-minute song (133 kbit/s)
* 650–900 MB – a CD-ROM
* 1 GB: 114 minutes of uncompressed CD-quality audio at 1.4 Mbit/s
* 32/64/128 GB: Three common sizes of USB flash drive, USB flash drives
* 6 TB: The size of a $100 hard disk (as of early 2022)
* 20 TB: Largest hard disk drive (as of early 2022)
* 100 TB: Largest commercially available Solid-state drive, solid state drive (as of early 2022)
* 200 TB: Largest solid state drive constructed (prediction for mid 2022)
* 1.3 ZB: Prediction of the volume of the whole internet in 2016

Obsolete and unusual units

Several other units of information storage have been named:
* 1 bit: unibit, sniff
* 2 bits: dibit, crumb, quartic digit, quad, quarter, taste, tayste, tidbit, tydbit, lick, lyck, semi-nibble, snort, nyp
* 3 bits: tribit, triad, triade, tribble

* 4 bits: 4-bit character, character (on Intel 4004 – however, characters are typically 8 bits wide or larger on other processors), for others see ''nibble''
* 5 bits: pentad, pentade, nickel, nyckle
* 6 bits: byte (in early IBM machines using Binary Coded Decimal, BCD alphamerics), hexad, hexade, sextet
* 7 bits: heptad, heptade

* 8 bits: octet (computing), octet, commonly also called byte
* 9 bits: nonet, rarely used
* 10 bits: declet, decle, deckle, dyme
* 12 bits: slab (unit), slab
* 15 bits: parcel (on CDC 6600 and CDC 7600)
* 16 bits: doublet, wyde, parcel (on Cray-1), plate, playte, chomp, chawmp (on a 32-bit machine)
* 18 bits: chomp, chawmp (on a 36-bit machine)
* 32 bits: quadlet, tetra, dinner, dynner, gawble (on a 32-bit machine)
* 48 bits: gobble, gawble (under circumstances that remain obscure)
* 64 bits: octlet, octa
* 96 bits: bentobox (in ITRON project, ITRON OS)
* 128 bits: hexlet
* 16 bytes: paragraph (Intel), paragraph (on Intel x86 processors)
* 256 bytes: page (computer memory), page (on Intel 4004, Intel 8080, 8080 and 8086 processors, also many other 8-bit processors – typically much larger on many 16-bit/32-bit processors)
* 6 trit (computing), trits: tryte
* combit, comword

Some of these names are jargon, obsolete, or used only in very restricted contexts.

See also

* Metric prefix
* File size

Notes

References

External links

Representation of numerical values and SI units in character strings for information interchanges

Bit Calculator
ake conversions between bits, bytes, kilobits, kilobytes, megabits, megabytes, gigabits, gigabytes, terabits, terabytes, petabits, petabytes, exabits, exabytes, zettabits, zettabytes, yottabits, yottabytes.

Paper on standardized units for use in information technology

Data Byte Converter

High Precision Data Unit Converters

{{DEFAULTSORT:Units of Information
Units of information,