The Hawker Siddeley HS 121 Trident (originally the de Havilland D.H.121 and the Airco DH 121) was a British short- (and later medium-) range airliner. It was the first T-tail rear-engined three-engined jet airliner to be designed. It was also the first airliner to make a blind landing in revenue service in 1965.
The Trident emerged in response to a call by the state-owned British European Airways Corporation (BEA) for a jet airliner for its premier West European routes. BEA had been induced by the government to issue this call despite its unwillingness to buy a large jet fleet. The airline's requirements fluctuated greatly in the 1950s and a decade later evolved radically away from what the Trident could offer. Adherence to BEA's changing specification was widely seen as limiting the Trident's appeal to other airlines and delaying its service entry.[N 1]
During its gestation, the Trident was also involved in a government drive to rationalise the British aircraft industry. The resulting corporate moves and government interventions contributed to delays causing it to enter service two months after its major competitor, the Boeing 727, losing further potential sales as a result. By the end of the programme in 1978, 117 Tridents had been produced. BEA's successor British Airways withdrew its Tridents by the mid-1980s. Trident services ended in China in the early 1990s.
In 1953, as British European Airways (BEA) introduced the world's first turboprop-powered civil airliner – the Vickers Viscount – into passenger service, the operator was already considering what would be required of a potential successor. Following the entry into service of jet airliners in 1952, many airline managers and economists remained sceptical and advocated turboprop airliners as replacements of piston-engined airliners. In 1953, while several manufacturers across the world were investing in pure jet-powered aircraft, BEA chose to favour turboprops on the basis of their superior economics and produced a specification that called for an aircraft capable of seating 100 passengers and attaining a maximum speed of 370 knots. As a result of the BEA specification, Vickers developed an enlarged derivative of the Viscount for BEA, the Vickers Vanguard, which was ordered by the airline on 20 July 1956. By this point, however, the French-built Sud Aviation Caravelle had conducted its maiden flight during the previous year and BEA was beginning to recognise that jet aircraft could soon be providing stiff competition.
In April 1956, Anthony Milward, chief executive of BEA stated that he "would rather do without [jet airliners]". Nevertheless, in December of that same year Lord Douglas of Kirtleside, BEA's chairman, stated that it might be necessary for a number of jet-powered short haul aircraft to be introduced while retaining turboprop aircraft as the mainstay of the company's inventory for the foreseeable future. In July 1956, BEA had announced what it called "outline requirements" for a short-haul "second generation jet airliner", to work alongside its turboprop fleet. It would carry a payload of some 20,000 lb (9,100 kg) or some 70 passengers up to 1,000 miles (1,600 kilometres), weigh about 100,000 lb (45,000 kg), use 6,000 ft (1,800 m) runways, cruise at a very high speed of 610 to 620 mph (980 to 1,000 km/h) and have "more than two engines".[N 2] According to aviation author Derek Woods, BEA "wanted something that was faster than the Caravelle which was threatening to be highly competitive". While not intended as an express requirement, commentators ever since have taken these figures to constitute a definite call to industry.
Four companies prepared projects to match the BEA outline. Bristol proposed the initially-four-engined Bristol Type 200. Avro proposed the futuristic Avro 740 trijet before shelving it and joining forces with Bristol and Hawker Siddeley. Vickers proposed the VC11 four-engined airliner, derived from its in-development VC10. The de Havilland company considered three possible contenders for the specification; two of these were four-engined developments of the early Comet, the world's first jet-powered airliner: the D.H.119 and the D.H.120, the latter being also intended to be offered to British Overseas Airways Corporation (BOAC). In July 1957, de Havilland made another submission in the form of the D.H.121; this proposal was furnished with three Rolls-Royce Avon turbojet engines and greatly resembled the eventual production aircraft. By August 1957, the D.H.121 proposal had been revised; differences included the adoption of the in-development Rolls-Royce Medway turbofan engine, and an expansion to accommodate a maximum of 98 passengers.
The D.H.121 was to be the world's first trijet airliner. Its designers felt this configuration offered a trade-off between cruising economy and take-off safety in case of an engine failure; moreover, the BEA specification had called for "more than two engines". Each of the three engines would drive its own hydraulic system, offering triple redundancy in case of any of the other systems failing. The engines were to be 13,790 lbf (61.34 kN) Medway engines. The D.H.121 was to have a gross weight of 123,000 lb (56,000 kg) or optionally, up to 150,000 pounds (68,000 kg), a range of 2,070 miles (3,330 kilometres), and seating for 111 in a two-class layout (or for over 140 in a high-density single-class layout as typical from the 1960s onwards on inclusive-tour charter flights). The design initially included a cruciform tail layout similar to that of the Caravelle. The engines were clustered at the rear, with the centre engine situated in the extreme rear of the fuselage fed by air ducted through a large oval intake at the front of the fin, a configuration similar to the later Boeing 727; the design eventually settled on a variable-incidence T-tail.
From the outset, the D.H.121 was planned to employ avionics which were very advanced for the period. Among other capabilities, they would offer automatic approach and landing within a few years of service entry. The avionics were also to have triplicated components for reliability and to allow "majority 2:1 voting" for aircraft guidance during automatic approach and landing. The physical dimensions of most avionics of the period required them to be housed in a large compartment beneath the Trident's flightdeck; the compartment's size was among the factors dictating a distinctive nose undercarriage design: offset by 2 ft (61 cm) to the port side and retracting sideways to stow across the D.H.121's longitudinal axis.
BEA soon selected the D.H.121 as the basis for detailed negotiations, but these talks were protracted due to multiple factors, including wider policy decisions of the British government and indecision within BEA itself. During the time that the D.H.121 had emerged in the late 1950s, the British government came to view the airframe and aeroengine industries as too fragmented into small companies; accordingly, a policy favouring mergers into a few large groups was adopted. de Havilland was keen to retain their independence and leadership of the D.H.121, and thus approached the government with a proposal to form a consortium under which de Havilland would produce the fuselage, Bristol would manufacture the wings, and various other companies, including Hunting Aircraft and Fairey Aviation would be responsible for other elements; however, Bristol strongly opposed this arrangement and chose to work with Hawker Siddeley in competition against de Havilland.
Companies vigorously competed to be selected by BEA due to the lure of its £30 million contract, as well as the likelihood of lucrative overseas export sales. On 4 February 1958, de Havilland, along with Hunting and Fairey, announced that they had agreed to form a partnership for the purpose of manufacturing and marketing the D.H.121; the consortium adopted the corporate name of the defunct Airco company, which had been Geoffrey de Havilland's employer during the First World War. The Minister of Supply stated of the Airco consortium that "this is not quite what [he] had in mind". Nevertheless, both Airco and the rival Bristol-Hawker Siddeley team proceeded to conduct their own approaches to various overseas airlines; sufficiently interested, American airline Pan American World Airways invited both teams to present their proposed airliners in January 1958. Sir Matthew Slattery, chairman of Bristol and Short Brothers, appealed for BEA to delay any decision until after one of the competing firms had already secured an export order for their airliner. In response, Lord Douglas stated that BEA wished to order the D.H.121 and was awaiting approval from the government; Douglas's reply has been viewed as the death knell for the rival Type 200 proposal.
Meanwhile, a new prospective rival airliner emerged, this time from Boeing in the United States, in the form of the Boeing 727, which also had a tri-jet configuration. Boeing had begun its studies into this sector of the market in 1956, and elected to launch its own tri-jet programme in 1959. Airco executives, who were at the time intensely exploring various alternatives and further partnerships with other aircraft companies, considered the possibility that Boeing might choose to drop the 727 project and instead co-manufacture the Airco D.H.121 in the USA; Lord Douglas was one of the proponents of this initiative. As a result, Airco invited a team of Boeing engineers and executives to Hatfield; (Boeing later permitted a return visit by de Havilland representatives to Seattle); however, Boeing revealed few details of their plans for the 727, while virtually all information on the D.H.121 had been shared with Boeing, an openness that had allegedly "amazed" Boeing. British commentators have tended to interpret this episode as involving the acquisition of sensitive proprietary data on the D.H.121 by a direct competitor. Woods described the action as "de Havilland solemnly handed all its research over to its rivals...the crowning piece of stupidity".
On 12 February 1958, the British government authorised BEA to commence contractual negotiations along with the issuing of a letter of intent for 24 aircraft. Accordingly, that same month, BEA announced that the D.H.121 had come closest to its requirements and that it would proceed to order 24 with options on 12 more. It took a further six months for the government to approve a formal BEA order for the D.H.121; the government had favoured the Bristol 200 for industrial policy reasons. Reportedly, BEA had a considerable interest in the Caravelle itself, however this would have been a politically unacceptable choice. BEA also favoured de Havilland, and therefore the Trident submission, due to the firm's established experience with jet airlines with its prior development of the Comet.
In April 1958, de Havilland firmed the general configuration of the D.H.121 and established a development timetable, including a projected date for the type's maiden flight to be conducted during mid-1961. The company's market research department was forecasting that as many as 550 airliners in its category would be sold by 1965. Noting that a greater preference for the seating dimensions of what would become Economy class was emerging amongst airlines, design alterations were made to adopt a slightly larger diameter fuselage to accommodate six-abreast seating, providing for a maximum configuration of 111 seats. According to Woods, this enlarged version of the D.H.121 was "on the verge of building the right aeroplane for the market and the success of the Viscount looked like being repeated".
In March 1959, BEA, which had become concerned by a recent decline in passenger growth, concluded that the D.H.121's payload-range capacity could be too great for their needs and petitioned de Havilland to reduce the scale of the design to suit their revised projections. Fearing that the proposed scale of the Trident was too large, the airline had elected to effectively tear up the programme for its redesigning for their immediate situation. In 1959, BEA had a large fleet in operation and on order, and the issue of overcapacity was a critical concern. The airline's concerns reflected three factors: a short-lived airline recession in the late 1950s; the imminent arrival into service of a large fleet of turboprop Vickers Vanguards which duplicated the D.H.121's general payload-range area, and the growing trend to higher-density seating.
Although de Havilland stated that they generally concurred with BEA, its management also stated that they had worked "under terms more onerous than anything D.H. had previously undertaken". Industry observers at the time felt that the British aircraft industry had again stumbled "into the pitfall of having designed exclusively for one customer an aeroplane that has potentially a much wider scope": a sentiment which would be echoed throughout the Trident's subsequent history. The de Havilland board elected to submit to BEA's demand, overriding input from its own sales and market research departments which indicated that other airlines sought the larger model instead. It was, however, noted that de Havilland had not yet secured a formal and final BEA order and that its competitor Bristol was actively promoting their 200 [N 3] project, which was significantly smaller than the D.H.121. At the time Boeing and Douglas were also downsizing their DC-9 and 727 projects. It was felt the original large D.H.121 would have to compete against the Convair 880 and Boeing 720 some four years after their service entries, whereas a cut-back design would be more competitive against the then-projected 75–100 seat, twin-engined DC-9.
Downsizing the Trident involved substantial changes to the design being made, including a powerplant change from the Medway to a scaled-down derivative, the 40 percent less powerful 9,850 lbf (43.8 kN) Rolls-Royce Spey 505. The gross weight was cut by about a third to 105,000 pounds (48,000 kilograms), while the range was cut by more than half to 930 miles (1,500 kilometres), and mixed-class seating was cut by about a quarter to 75 or 80 (97 in a single-class layout). Wing span was reduced by approximately 17 ft (5.2 m), wing area by 30 percent and overall length by 13 ft (4.0 m). The revised design retained some features of the original one, notably its fuselage diameter. It had a smaller flightdeck and single-axis, two-wheel, four-tyre main undercarriage legs in place of four-wheel bogies. Woods summarised the BEA-mandated redesign as: "At one blow the 121 was emasculated in terms of size, power and range".
Six months following BEA's request, de Havilland and the airline came to an agreement on the downsized D.H.121. Details of the emerging aircraft, including its pioneering avionics, were announced to the public in early 1960. It was this revised aircraft that BEA ultimately ordered on 24 August 1959, initially in 24 examples with 12 options. In September 1960, the future airliner's name, Trident, was announced at the Farnborough Airshow; this name had been chosen as a reflection of its then-unique three-jet, triple-hydraulic configuration.
By 1960, de Havilland had been acquired by the Hawker Siddeley group. After the de Havilland takeover, Airco was disbanded. Hunting was marshalled into the competing newly formed British Aircraft Corporation (BAC); their departure removed any putative possibility of the Hunting 107 (later the BAC One-Eleven) being marketed alongside the D.H.121 as a complementary, smaller member of the same airliner family. Fairey Aviation, partially incorporated into Westland Aircraft, also left the D.H.121 project.[N 4] With the move to Hawker Siddeley Aviation, the designation was eventually revised to the HS 121. The reorganisation of the industry had compounded upon the delays caused by BEA's changes to the specification, which had in turn harmed the Trident's competitiveness against the Boeing 727.
The rival Boeing 727 had quickly established a lead over the Trident. The 727's early lead only strengthened it in subsequent competitions; one such example is Trans Australia Airlines, which had determined the Trident to be superior to the Boeing 727 from an operational standpoint, however it was also viewed as having been commercially risky to choose a different fleet from rival airlines such as Ansett Australia, who had already selected the 727. By 1975, only 117 Tridents had been sold against over 1,000 727s.
According to Woods, a significant opportunity that may have enabled the Trident to catch up with the 727 was lost during the 1960s in the form of two competitions for a maritime patrol aircraft; a NATO design competition to replace the Lockheed P-2 Neptune, and Air Staff Requirement 381, which sought a replacement for the Royal Air Force's piston-engined Avro Shackleton. Amongst the various submissions that had been produced in response was a bid by Avro, which had become another member of the Hawker Siddeley group by that time, which was designated as the Avro 776. The proposed Avro 776 mated the Trident's fuselage with a redesigned and enlarged wing along with more powerful Rolls-Royce RB178 engines capable of 16,300 lb of thrust. In addition to the maritime patrol requirement, Avro envisioned that the aircraft could be utilised in various military roles, including as a 103-seat troop transport as well as being armed with up to four Skybolt air-launched ballistic missile (ALBM) as a nuclear-armed bomber. In addition to Avro's proposals, Armstrong Whitworth had also proposed their own military variants of the Trident.
Later revisions of the Avro 776 substituted the RB.178 engine for the newer Rolls-Royce RB211 turbofan engine, the development of the latter being supported by the 776's procurement if selected. Rolls-Royce Limited, having shelved development of the Medway following the Trident's redesign, was keen to develop an engine to slot between the 10,000 lb Spey engine and the 20,000 lb Rolls-Royce Conway engine; if such an engine had been produced, it could have equipped new versions of the civil Trident as well. Furnished with a more capable engine that could provide more thrust than the Spey was capable of, an extended fuselage could also have been adopted and existing landing restrictions could have been discarded; overall, the Trident would have been a far closer match to the 727. Wood summarised the importance of this prospective development as: "For the Trident programme, the RB.177 would have been a God-send".
At one point, the Avro 776 looked set to win the competition to be selected as the RAF's new maritime patrol aircraft. However, due to a desire to cut costs, the RAF decided to issue an entirely new Operational Requirement, under which the demands for speed, endurance, and capacity had all been diminished. As a result of the changed requirement, the design team was recalled and the Avro 776 was entirely sidelined for a new proposal. This new proposal, based upon the de Havilland Comet's fuselage, had little to do with the Trident save for the use of its existing Spey engines; this would go on to be selected and procured as the Hawker Siddeley Nimrod. As a result of this loss, prospects for an enlarged Trident equipped with more powerful engines effectively evaporated.
The Trident was a jet airliner of all-metal construction with a T-tail and a low-mounted wing with a quarter-chord sweepback of 35 degrees. It had three rear-mounted engines: two in side-fuselage pods, and the third in the fuselage tailcone, aspirating through an S-shaped duct. One version, the 3B, had a fourth "boost" engine aspirated through a separate intake duct above the main S-duct. All versions were powered by versions of the Rolls-Royce Spey, while the boost engine was also by Rolls-Royce: the RB.162, originally intended as a lift engine for VTOL applications.
The Trident was one of the fastest subsonic commercial airliners, regularly cruising at over 610 mph (980 km/h). At introduction into service its standard cruise Mach Number was 0.88/ 380 kn IAS, probably the highest of any of its contemporaries. Designed for high speed, with a critical Mach number of 0.93, the wing produced relatively limited lift at lower speeds. This, and the aircraft's low power-to-weight ratio, called for prolonged takeoff runs. Nevertheless, the Trident fulfilled BEA's 6,000 ft (1,800 m) field length criterion and its relatively staid airfield performance was deemed adequate before the arrival into service of the Boeing 727 and later jet airliners built to 4,500 ft (1,400 m) field length criteria. The aerodynamics and wing was developed by a team led by Richard Clarkson, who would later take the Trident's wing design for the wing of the Airbus A300; for the Trident he won the Mullard Award in 1969.
The Trident was routinely able to descend at rates of up to 4500 ft/min (23 m/s) in regular service. In emergency descents it was permissible to use reverse thrust of up to 10,000 ft/min. Below 280 kn IAS, it was also possible to extend the main landing gear for use as an airbrake. The Trident's first version, Trident 1C, had the unusual capability of using reverse thrust prior to touchdown. The throttles could be closed in the flare and reverse idle set to open the reverser buckets. At pilot discretion, up to full reverse thrust could then be used prior to touchdown. This was helpful to reduce hydroplaning and give very short landing runs on wet or slippery runways while preserving wheel brake efficiency and keeping wheel brake temperatures low. Brakes were fitted with the Dunlop Maxaret anti-skid system.
The Trident had a complex, sophisticated and comprehensive avionics fit which was successful in service. This comprised a completely automatic blind landing system developed by Hawker Siddeley and Smiths Aircraft Instruments. It was capable of guiding the aircraft automatically during airfield approach, flare, touchdown and even roll-out from the landing runway. The system was intended to offer autoland by 1970. In the event, it enabled the Trident to perform the first automatic landing by a civil airliner in scheduled passenger service on 10 June 1965 and the first genuinely "blind" landing in scheduled passenger service on 4 November 1966.
The ability to land in fog solved a major problem at London Heathrow and other British airports. Delays were commonplace when Category 1 (Cat 1 = 200 ft (61 m) decision height and 600 metre runway visual range RVR) instrument landing system (ILS) was in use. The Trident's autoland system pioneered the use of lower landing minima, initially with Category 2 (100 ft decision height and 400 metres RVR) and soon after "zero-zero" (Category 3C) conditions. Since Tridents could operate safely to airfields equipped with suitable ILS installations, they could operate schedules regardless of weather, while other aircraft were forced to divert.
The Trident's advanced avionics displayed the aircraft's momentary position relative to the ground on a moving map display on the centre instrument panel. This electro-mechanical device also recorded the aircraft's track using a stylus plotting on a motor-driven paper map. Positional information was given by a Doppler navigation system which read groundspeed and drift data which, alongside heading data, drove the stylus.
The Trident was the first airliner fitted with a quick access flight data recorder. This sampled 13 variables, converted them into a digital format and stored them on magnetic tape for ground analysis.
Hawker Siddeley Aviation, which had absorbed de Havilland, needed additional customers for the Trident, so entered into discussions with American Airlines (AA) in 1960. American demanded an aircraft with a longer range, which meant that the original DH121 design would have fulfilled its requirements almost perfectly. To fill AA's needs, design began on a new Trident 1A, powered with uprated Rolls-Royce Spey 510s of 10,700 lbf (47.6 kN) thrust, and a larger wing with more fuel, raising gross weight to 120,000 lb (54,000 kg) and range to 1,800 miles (2,900 kilometres). AA eventually declined the aircraft in favour of the Boeing 727.
Some of these changes were added into the original prototype, and it was renamed the Trident 1C. The main difference was a larger fuel tank in the centre section of the wing, raising weights to 115,000 lb (52,000 kg) and range to 1,400 miles (2,300 kilometres). The first Trident 1, G-ARPA, made its maiden flight on 9 January 1962 from Hatfield Aerodrome, and entered service on 1 April 1964. By 1965, there were 15 Tridents in BEA's fleet and by March 1966, the fleet had increased to 21.
Hawker Siddeley then proposed an improved 1C, the Trident 1E. This would be powered by 11,400 lbf (50.7 kN) Spey 511s, have a gross weight of 128,000 lb (58,000 kg), an increased wing area by extending the chord, and the same fuselage but with up to 140 seats in a six-abreast configuration. This specification took the 1C closer to the larger concept of the original DH121, but with 7,000 lbf (31 kN) less thrust. There were only a few sales of the new design: three each for Kuwait Airways and Iraqi Airways, four for Pakistan International Airlines (later sold to CAAC), two each for Channel Airways and Northeast Airlines, and one for Air Ceylon. Channel Airways' aircraft were equipped with cramped, 21" pitch, seven-abreast seating in the forward section.
At this point, BEA decided that the Trident was too short-legged for its ever-expanding routes, and that an even longer-ranged version was needed. Hawker Siddeley responded with another upgrade designated Trident 1F. It would have the Spey 511 engines, a 2.8 m fuselage stretch, a gross weight of 132,000 lb (60,000 kg) and up to 128 seats in the original five-abreast configuration. BEA planned to buy 10 1Fs, plus an option for 14 further aircraft.
As work continued on the 1F the changes became so widespread that it was renamed the Trident 2E, E for Extended Range. Now powered by newer Spey 512s with 11,930 lbf (53.1 kN) thrust, it also replaced wing leading-edge droops with slats, and extended the span with Küchemann-style tips. It had a gross weight of 142,400 lb (64,600 kg) and a 2,000 miles (3,200 kilometres) range.
BEA bought 15, while two were bought by Cyprus Airways. CAAC, the Chinese national airline, bought 33. The first flight of this version was made on 27 July 1967 and it entered service with BEA in April 1968.
Subsequently, the Trident was becoming the backbone of the BEA fleet and BEA wanted an even larger aircraft. Hawker Siddeley offered two new designs in 1965: a larger 158-seat two-engine aircraft otherwise similar to the Trident known as the HS132; and the 185-seat HS134, which moved the engines under the wings, a design very similar to the Boeing 757. Both were to be powered by a new high-bypass engine under development at the time, the Rolls-Royce RB178. BEA instead opted for Boeing 727s and 737s to fill the roles of both the BAC 1–11 and Trident, but this plan was vetoed by the British government.
BEA returned to Hawker Siddeley and chose a stretched version of the basic Trident, the Trident 3. A fuselage stretch of 5 m (16 ft 5 in) made room for up to 180 passengers; Hawker Siddeley raised the gross weight to 143,000 lb (65,000 kg) and made modifications to the wing to increase its chord; the engines remained the same. BEA rejected the design as being unable to perform adequately in "hot and high" conditions, in light of such issues experienced with the Trident 2E. Since the Spey 512 was the last of the Spey line, extra thrust would be difficult to obtain. Instead of attempting to replace the three engines with a completely different type, which would have been difficult with one engine buried in the tail, Hawker Siddeley's engineers decided to add a fourth engine in the tail, the tiny Rolls-Royce RB162 turbojet, fed from its own intake behind a pair of movable doors. The engine added 15% more thrust for takeoff, while adding only 5% more weight, and it would only be used when needed. BEA accepted this design as the Trident 3B, and ordered 26. The first flight was on 11 December 1969 and the aircraft entered service on 1 April 1971. Addition of extra fuel capacity resulted in the Super Trident 3B.
The Trident experienced some key export sales, particularly to China. Following a thawing of relations between Britain and the People's Republic of China, China completed several purchase deals and more than 35 Tridents were eventually sold.
In 1977, fatigue cracks were discovered in the wings of the British Airways Trident fleet. The aircraft were ferried back to the manufacturer and repaired, then returned to service. On 1 January 1986, new ICAO noise legislation came into force, requiring operators of first- and second-generation jet airliners to have hush kits fitted to their engines; the main British operator of the type, British Airways, viewed the refit as unviable and instead they chose to phase the Trident out of their fleet. A total of 117 Tridents were produced, while the Boeing 727, built to the original specification for the Trident, sold 1,832 units.
Several aircraft are either preserved or in storage at various locations in China. Three airframes, one with a broken back, can be seen at the Chinese Aviation Museum at Datangshan, north of Beijing. In 2008, the personal aircraft of Mao Zedong was offered for sale after a decision by merchants at a market in Zhuhai, China that the Trident, formerly a tourist attraction, was limiting business.
|Trident 1||Trident 1C||Trident 1E||Trident 2E||Trident 3B|
|Cockpit Crew||Three (Captain, First Officer and System Panel Operator)|
|Seating Capacity (Typical)||101 Passengers||108 Passengers||115 Passengers||180 Passengers|
|Length||114 ft 9 in (34.98 m)||131 ft 2 in (39.98 m)|
|Wingspan||89 ft 10 in (27.38 m)||95 ft (29 m)||98 ft (30 m)|
|Wing Area||1,358 sq ft (126.2 m2)||1,415 sq ft (131.5 m2)||1,462 sq ft (135.8 m2)|
|Wing Sweepback||35 degrees|
|Overall Height||27 ft 0 in (8.23 m)||28 ft 3 in (8.61 m)|
|Maximum Cabin Width||11 ft 3.5 in (3.442 m)|
|Operating Empty Weight, typical||66,700 lb (30,300 kg)||67,200 lb (30,500 kg)||70,000 lb (32,000 kg)||73,200 lb (33,200 kg)||83,000 lb (38,000 kg)|
|Maximum Takeoff Weight||107,000 lb (49,000 kg)||115,000 lb (52,000 kg)||128,000 lb (58,000 kg)||142,500 lb (64,600 kg)||150,000 lb (68,000 kg)|
|Cruise Speed||Mach 0.86 – 506 kn (582 mph; 937 km/h) at 30,000 ft (9,100 m)||Mach 0.84 – 495 kn (570 mph; 917 km/h) at 30,000 ft (9,100 m)|
|Range||1,350 mi (1,170 nmi; 2,170 km)||2,025 mi (1,760 nmi; 3,259 km)||2,200 mi (1,900 nmi; 3,500 km)||2,700 mi (2,300 nmi; 4,300 km)||2,235 mi (1,942 nmi; 3,597 km)|
|Fuel Capacity||3,840 imp gal (17,500 l; 4,610 US gal)||4,840 imp gal (22,000 l; 5,810 US gal)||5,440 imp gal (24,700 l; 6,530 US gal)||5,774 imp gal (26,250 l; 6,934 US gal)||5,440 imp gal (24,700 l; 6,530 US gal)|
|Service Ceiling||35,000 ft (11,000 m)|
|Powerplant||3 x Rolls Royce Spey RB163-1 Mk505-5||3 x Rolls Royce Spey RB163-25 Mk511-5||3 x Rolls Royce Spey RB163-25 Mk512-5||3 x Rolls Royce Spey RB163-25 Mk512-5 + 1 x Rolls-Royce RB162-86 Booster|
|Thrust||3 x 10,400 lbf (46 kN)||3 x 11,400 lbf (51 kN)||3 x 11,960 lbf (53.2 kN)||3 x 11,960 lbf (53.2 kN) Booster: 5,250 lbf (23.4 kN)|
|Wikimedia Commons has media related to Hawker Siddeley Trident.|