Cutting devine hill.jpg

Cutting is the separation or opening of a physical object, into two or more portions, through the application of an acutely directed force.

Implements commonly used for cutting are the knife and saw, or in medicine and science the scalpel and microtome. However, any sufficiently sharp object is capable of cutting if it has a hardness sufficiently larger than the object being cut, and if it is applied with sufficient force. Even liquids can be used to cut things when applied with sufficient force (see water jet cutter).

Cutting is a compression (physical), compressive and shearing (physics), shearing phenomenon, and occurs only when the total stress (physics), stress generated by the cutting implement exceeds the ultimate Strength of materials, strength of the material of the object being cut. The simplest applicable equation is:

$\text =$ or $\tau=\frac$

The stress generated by a cutting implement is directly proportional to the force with which it is applied, and inversely proportional to the area of contact. Hence, the smaller the area (i.e., the sharper the cutting implement), the less force is needed to cut something. It is generally seen that cutting edges are thinner for cutting soft materials and thicker for harder materials. This progression is seen from kitchen knife, to cleaver, to axe, and is a balance between the easy cutting action of a thin blade vs strength and edge durability of a thicker blade.

Metal cutting

Cutting has been at the core of manufacturing throughout history. For metals many methods are used and can be grouped by the physical phenomenon used. It is the process of producing a work piece by removing unwanted material from a block of metal, in the form of chips.
* Chip formation, Chip forming (material removal processes) – sawing, drilling, Milling (machining), milling, turning etc.
* Shearing (manufacturing), Shearing – punching, Stamping press, stamping, scissoring, blanking
* Abrasion (mechanical), Abrasive material removal – Grinding (abrasive cutting), grinding, lapping, Polishing (metalworking), polishing, Water jet cutter, water-jet
* Heat – flame cutting, plasma cutting, laser cutting
* Electrochemical – etching, electrical discharge machining (EDM), electrochemical machining (ECM)

Every method has its limitations in accuracy, cost, and effect on the material. For example, heat may damage the quality of heat treated alloys, and laser cutting is less suitable for highly reflective materials such as aluminum. Laser cutting sheet metal produces flat parts and etches and engraves parts from complex or simple designs. It is used over other cutting options for its quick process and customizable abilities.

See also

* Tearing
* Machining
* Knife sharpening
* Laser cutting
* Water jet cutter, Water jet cutting

References

External links

*

How stuff works – Handsaws

Etching vs. traditional metal machining

{{Authority control

Cutting,

de:Zerspanen