A fictitious force (also called a pseudo force,^{[1]} d'Alembert force,^{[2]}^{[3]} or inertial force^{[4]}^{[5]}) is an apparent force that acts on all masses whose motion is described using a noninertial frame of reference, such as a rotating reference frame. Examples are the forces that act on passengers in an accelerating or braking automobile, and the force that pushes objects toward the rim of a centrifuge.
The fictitious force F is due to an object's inertia when the reference frame does not move inertially, and thus begins to accelerate relative to the free object. The fictitious force thus does not arise from any physical interaction between two objects (that is, it is not a "contact force"), but rather from the acceleration a of the noninertial reference frame itself, which from the viewpoint of the frame now appears to be an acceleration of the object instead, requiring a "force" to make this happen. As stated by Iro:^{[6]}^{[7]}
Such an additional force due to nonuniform relative motion of two reference frames is called a pseudoforce.
— H. Iro in A Modern Approach to Classical Mechanics p. 180
Assuming Newton's second law in the form F = m a, fictitious forces are always proportional to the mass m.
The fictitious force on an object arises as an imaginary influence, when the frame of reference used to describe the object's motion is accelerating compared to a nonaccelerating frame. The fictitious force "explains," using Newton's mechanics, why an object does not follow Newton's laws and "float freely" as if weightless. As a frame can accelerate in any arbitrary way, so can fictitious forces be as arbitrary (but only in direct response to the acceleration of the frame). However, four fictitious forces are defined for frames accelerated in commonly occurring ways: one caused by any relative acceleration of the origin in a straight line (rectilinear acceleration);^{[8]} two involving rotation: centrifugal force and Coriolis force; and a fourth, called the Euler force, caused by a variable rate of rotation, should that occur.
Gravitational force would also be a fictitious force based upon a field model in which particles distort spacetime due to their mass, such as General Relativity.
The role of fictitious forces in Newtonian mechanics is described by Tonnelat:^{[9]}
For Newton, the appearance of acceleration always indicates the existence of absolute motion – absolute motion of matter where real forces are concerned; absolute motion of the reference system, where socalled fictitious forces, such as inertial forces or those of Coriolis, are concerned.
— MarieAntoinette Tonnelat in The Principles of Electromagnetic Theory and Relativity, p. 113
Fictitious forces arise in classical mechanics and special relativity in all noninertial frames.^{[10]}^{:10} Inertial frames are privileged over noninertial frames because they do not have physics whose causes are outside of the system, while noninertial frames do.^{[10]}^{:209} Fictitious forces, or physics whose cause is outside of the system, are no longer necessary in general relativity,^{[10]}^{:215—223} since these physics are explained with the geodesics of spacetime.^{[11]}
The surface of the Earth is a rotating reference frame. To solve classical mechanics problems exactly in an Earthbound reference frame, three fictitious forces must be introduced: the Coriolis force, the centrifugal force (described below) and the Euler force. The Euler force is typically ignored because the variations in the angular velocity of the rotating Earth surface are usually insignificant. Both of the other fictitious forces are weak compared to most typical forces in everyday life, but they can be detected under careful conditions. For example, Léon Foucault used his Foucault pendulum to show that a Coriolis force results from the Earth's rotation. If the Earth were to rotate twenty times faster (making each day only ~72 minutes long), people could easily get the impression that such fictitious forces were pulling on them, as on a spinning carousel; people in temperate and tropical latitudes would, in fact, need to hold on in order to avoid being launched into orbit by the centrifugal force.
Observers inside a closed box that is moving with a constant velocity cannot detect their own motion; however, observers within an accelerating reference frame can detect that they are in a noninertial reference frame from the fictitious forces that arise. For example, for straightline acceleration Vladimir Arnold presents the following theorem:^{[12]}
In a coordinate system K which moves by translation relative to an inertial system k, the motion of a mechanical system takes place as if the coordinate system were inertial, but on every point of mass m an additional "inertial force" acted: F = −ma, where a is the acceleration of the system K.
Other accelerations also give rise to fictitious forces, as described mathematically below. The physical explanation of motions in an inertial frame is the simplest possible, requiring no fictitious forces: fictitious forces are zero, providing a means to distinguish inertial frames from others.^{[13]}
An example of the detection of a noninertial, rotating reference frame is the precession of a Foucault pendulum. In the noninertial frame of the Earth, the fictitious Coriolis force is necessary to explain observations. In an inertial frame outside the Earth, no such fictitious force is necessary.
Figure 1 (top) shows an accelerating car. When a car accelerates, a passenger feels like they're being pushed back into the seat. In an inertial frame of reference attached to the road, there is no physical force moving the rider backward. However, in the rider's noninertial reference frame attached to the accelerating car, there is a backward fictitious force. We mention two possible reasons for the force to clarify its (the force's) existence:^{[14]}
How can the accelerating frame be discovered to be noninertial? In the accelerating frame, everything appears to be subject to zero net force, and nothing moves. Nonetheless, compression of the seat is observed and is explained in the accelerating frame (and in an inertial frame) by the force of acceleration on the seat from the car on one side, and the opposing force of reaction to acceleration by the passenger on the other. Identification of the accelerating frame as noninertial cannot be based simply on the compression of the seat, which all observers can explain; rather it is based on the simplicity of the physical explanation for this compression.
The explanation of the seat compression in the accelerating frame requires not only the thrust from the axle of the car, but additional (fictitious) forces. In an inertial frame, only the thrust from the axle is necessary. Therefore, the inertial frame has a simpler physical explanation (not necessarily a simpler mathematical formulation, however), indicating the accelerating frame is a noninertial frame of reference. In other words, in the inertial frame, fictitious forces are zero. See inertial frame for more detail.
This example illustrates how fictitious forces arise from switching from an inertial to a noninertial reference frame. Calculations of physical quantities (compression of the seat, required force from the axle) made in any frame give the same answers, but in some cases calculations are easier to make in a noninertial frame. (In this simple example, the calculations are equally complex for the two frames described.)
Animation: driving from block to block 

In this illustration the car accelerates after a stop sign until midway up the block, at which point the driver is immediately off the accelerator and onto the brake so as to make the next stop. 
A similar effect occurs in circular motion, circular from the standpoint of an inertial frame of reference attached to the road. When seen from a noninertial frame of reference attached to the car, the fictitious force called the centrifugal force appears. If the car is moving at constant speed around a circular section of road, the occupants will feel pushed outside by this centrifugal force, away from the center of the turn. Again the situation can be viewed from inertial or noninertial frames:
A classic example of fictitious force in circular motion is the experiment of rotating spheres tied by a cord and spinning around their center of mass. In this case, as with the linearly accelerating car example, the identification of a rotating, noninertial frame of reference can be based upon the vanishing of fictitious forces. In an inertial frame, fictitious forces are not necessary to explain the tension in the string joining the spheres. In a rotating frame, Coriolis and centrifugal forces must be introduced to predict the observed tension.
To consider another example, where a rotating reference frame is very natural to us, namely the surface of the rotating Earth, centrifugal force reduces the apparent force of gravity by about one part in a thousand, depending on latitude. This reduction is zero at the poles, maximum at the equator.
Animation: object released from a carousel 

From the map frame perspective, what's dangerous on losing centripetal acceleration may be your speed. From the spin frame perspective, the danger instead may lie with the geometric acceleration which gives rise to that fictitious force.Note: With some browsers, you can hit [Esc] to freeze the motion for more detailed analysis. However you may have to reload the page to restart. 
The fictitious Coriolis force, which is observed in rotational frames, is ordinarily visible only in very largescale motion like the projectile motion of longrange guns or the circulation of the Earth's atmosphere (see Rossby number). Neglecting air resistance, an object dropped from a 50meterhigh tower at the equator will fall 7.7 millimeters eastward of the spot below where it is dropped because of the Coriolis force.^{[16]}
In the case of distant objects and a rotating reference frame, what must be taken into account is the resultant force of centrifugal and Coriolis force. Consider a distant star observed from a rotating spacecraft. In the reference frame corotating with the spacecraft, the distant star appears to move along a circular trajectory around the spacecraft. The apparent motion of the star is an apparent centripetal acceleration. Just like in the example above of the car in circular motion, the centrifugal force has the same magnitude as the fictitious centripetal force, but is directed in the opposite, centrifugal direction. In this case the Coriolis force is twice the magnitude of the centrifugal force, and it points in centripetal direction. The vector sum of the centrifugal force and the Coriolis force is the total fictitious force, which in this case points in centripetal direction.
Fictitious forces can be considered to do work, provided that they move an object on a trajectory that changes its energy from potential to kinetic. For example, consider a person in a rotating chair holding a weight in their outstretched hand. If they pull their hand inward toward their body, from the perspective of the rotating reference frame, they have done work against the centrifugal force. When the weight is let go, it spontaneously flies outward relative to the rotating reference frame, because the centrifugal force does work on the object, converting its potential energy into kinetic. From an inertial viewpoint, of course, the object flies away from them because it is suddenly allowed to move in a straight line. This illustrates that the work done, like the total potential and kinetic energy of an object, can be different in a noninertial frame than an inertial one.
The notion of "fictitious force" comes up in Einstein's general theory of relativity.^{[17]}^{[18]} All fictitious forces are proportional to the mass of the object upon which they act, which is also true for gravity.^{[19]} This led Albert Einstein to wonder whether gravity was a fictitious force as well. He noted that a freefalling observer in a closed box would not be able to detect the force of gravity; hence, freefalling reference frames are equivalent to an inertial reference frame (the equivalence principle). Following up on this insight, Einstein was able to formulate a theory with gravity as a fictitious force; attributing the apparent acceleration of gravity to the curvature of spacetime. This idea underlies Einstein's theory of general relativity. See Eötvös experiment.
Animation: ball that rolls off a cliff 

Note: The rain frame perspective here, rather than being that of a raindrop, is more like that of a trampoline jumper whose trajectory tops out just as the ball reaches the edge of the cliff. The shell frame perspective^{[20]} may be familiar to planet dwellers who rely minute by minute on upward physical forces from their environment, to protect them from the geometric acceleration due to curved spacetime. 
Many problems require use of noninertial reference frames, for example, those involving satellites^{[21]}^{[22]} and particle accelerators.^{[23]} Figure 2 shows a particle with mass m and position vector x_{A}(t) in a particular inertial frame A. Consider a noninertial frame B whose origin relative to the inertial one is given by X_{AB}(t). Let the position of the particle in frame B be x_{B}(t). What is the force on the particle as expressed in the coordinate system of frame B? ^{[24]}^{[25]}
To answer this question, let the coordinate axis in B be represented by unit vectors u_{j} with j any of { 1, 2, 3 } for the three coordinate axes. Then
The interpretation of this equation is that x_{B} is the vector displacement of the particle as expressed in terms of the coordinates in frame B at time t. From frame A the particle is located at:
As an aside, the unit vectors { u_{j} } cannot change magnitude, so derivatives of these vectors express only rotation of the coordinate system B. On the other hand, vector X_{AB} simply locates the origin of frame B relative to frame A, and so cannot include rotation of frame B.
Taking a time derivative, the velocity of the particle is:
The second term summation is the velocity of the particle, say v_{B} as measured in frame B. That is:
The interpretation of this equation is that the velocity of the particle seen by observers in frame A consists of what observers in frame B call the velocity, namely v_{B}, plus two extra terms related to the rate of change of the frameB coordinate axes. One of these is simply the velocity of the moving origin v_{AB}. The other is a contribution to velocity due to the fact that different locations in the noninertial frame have different apparent velocities due to rotation of the frame; a point seen from a rotating frame has a rotational component of velocity that is greater the further the point is from the origin.
To find the acceleration, another time differentiation provides:
Using the same formula already used for the time derivative of x_{B}, the velocity derivative on the right is:
Consequently,


(1) 
The interpretation of this equation is as follows: the acceleration of the particle in frame A consists of what observers in frame B call the particle acceleration a_{B}, but in addition there are three acceleration terms related to the movement of the frameB coordinate axes: one term related to the acceleration of the origin of frame B, namely a_{AB}, and two terms related to rotation of frame B. Consequently, observers in B will see the particle motion as possessing "extra" acceleration, which they will attribute to "forces" acting on the particle, but which observers in A say are "fictitious" forces arising simply because observers in B do not recognize the noninertial nature of frame B.
The factor of two in the Coriolis force arises from two equal contributions: (i) the apparent change of an inertially constant velocity with time because rotation makes the direction of the velocity seem to change (a dv_{B}/dt term) and (ii) an apparent change in the velocity of an object when its position changes, putting it nearer to or further from the axis of rotation (the change in due to change in x _{j} ).
To put matters in terms of forces, the accelerations are multiplied by the particle mass:
The force observed in frame B, F_{B} = ma_{B} is related to the actual force on the particle, F_{A}, by
where:
Thus, we can solve problems in frame B by assuming that Newton's second law holds (with respect to quantities in that frame) and treating F_{fictitious} as an additional force.^{[12]}^{[26]}^{[27]}
Below are a number of examples applying this result for fictitious forces. More examples can be found in the article on centrifugal force.
A common situation in which noninertial reference frames are useful is when the reference frame is rotating. Because such rotational motion is noninertial, due to the acceleration present in any rotational motion, a fictitious force can always be invoked by using a rotational frame of reference. Despite this complication, the use of fictitious forces often simplifies the calculations involved.
To derive expressions for the fictitious forces, derivatives are needed for the apparent time rate of change of vectors that take into account timevariation of the coordinate axes. If the rotation of frame 'B' is represented by a vector Ω pointed along the axis of rotation with orientation given by the righthand rule, and with magnitude given by
then the time derivative of any of the three unit vectors describing frame B is^{[26]}^{[28]}
and
as is verified using the properties of the vector cross product. These derivative formulas now are applied to the relationship between acceleration in an inertial frame, and that in a coordinate frame rotating with timevarying angular velocity ω(t). From the previous section, where subscript A refers to the inertial frame and B to the rotating frame, setting a_{AB} = 0 to remove any translational acceleration, and focusing on only rotational properties (see Eq. 1):
Collecting terms, the result is the socalled acceleration transformation formula:^{[29]}
The physical acceleration a_{A} due to what observers in the inertial frame A call real external forces on the object is, therefore, not simply the acceleration a_{B} seen by observers in the rotational frame B, but has several additional geometric acceleration terms associated with the rotation of B. As seen in the rotational frame, the acceleration a_{B} of the particle is given by rearrangement of the above equation as:
The net force upon the object according to observers in the rotating frame is F_{B} = ma_{B}. If their observations are to result in the correct force on the object when using Newton's laws, they must consider that the additional force F_{fict} is present, so the end result is F_{B} = F_{A} + F_{fict}. Thus, the fictitious force used by observers in B to get the correct behavior of the object from Newton's laws equals:
Here, the first term is the Coriolis force,^{[30]} the second term is the centrifugal force,^{[31]} and the third term is the Euler force.^{[32]}^{[33]}
This section does not cite any sources. (July 2008) (Learn how and when to remove this template message)

As a related example, suppose the moving coordinate system B rotates in a circle of radius R about the fixed origin of inertial frame A, but maintains its coordinate axes fixed in orientation, as in Figure 3. The acceleration of an observed body is now (see Eq. 1):
where the summations are zero inasmuch as the unit vectors have no time dependence. The origin of system B is located according to frame A at:
leading to a velocity of the origin of frame B as:
leading to an acceleration of the origin of B given by:
Because the first term, which is
is of the same form as the normal centrifugal force expression:
it is a natural extension of standard terminology (although there is no standard terminology for this case) to call this term a "centrifugal force". Whatever terminology is adopted, the observers in frame B must introduce a fictitious force, this time due to the acceleration from the orbital motion of their entire coordinate frame, that is radially outward away from the center of rotation of the origin of their coordinate system:
and of magnitude:
Notice that this "centrifugal force" has differences from the case of a rotating frame. In the rotating frame the centrifugal force is related to the distance of the object from the origin of frame B, while in the case of an orbiting frame, the centrifugal force is independent of the distance of the object from the origin of frame B, but instead depends upon the distance of the origin of frame B from its center of rotation, resulting in the same centrifugal fictitious force for all objects observed in frame B.
As a combination example, Figure 4 shows a coordinate system B that orbits inertial frame A as in Figure 3, but the coordinate axes in frame B turn so unit vector u_{1} always points toward the center of rotation. This example might apply to a test tube in a centrifuge, where vector u_{1} points along the axis of the tube toward its opening at its top. It also resembles the EarthMoon system, where the Moon always presents the same face to the Earth.^{[34]} In this example, unit vector u_{3} retains a fixed orientation, while vectors u_{1}, u_{2} rotate at the same rate as the origin of coordinates. That is,
Hence, the acceleration of a moving object is expressed as (see Eq. 1):
where the angular acceleration term is zero for constant rate of rotation. Because the first term, which is
is of the same form as the normal centrifugal force expression:
it is a natural extension of standard terminology (although there is no standard terminology for this case) to call this term the "centrifugal force". Applying this terminology to the example of a tube in a centrifuge, if the tube is far enough from the center of rotation, X_{AB} = R ≫ x_{B}, all the matter in the test tube sees the same acceleration (the same centrifugal force). Thus, in this case, the fictitious force is primarily a uniform centrifugal force along the axis of the tube, away from the center of rotation, with a value F_{Fict} = ω^{2} R, where R is the distance of the matter in the tube from the center of the centrifuge. It is standard specification of a centrifuge to use the "effective" radius of the centrifuge to estimate its ability to provide centrifugal force. Thus, a first estimate of centrifugal force in a centrifuge can be based upon the distance of the tubes from the center of rotation, and corrections applied if needed.^{[35]}^{[36]}
Also, the test tube confines motion to the direction down the length of the tube, so v_{B} is opposite to u_{1} and the Coriolis force is opposite to u_{2}, that is, against the wall of the tube. If the tube is spun for a long enough time, the velocity v_{B} drops to zero as the matter comes to an equilibrium distribution. For more details, see the articles on sedimentation and the Lamm equation.
A related problem is that of centrifugal forces for the EarthMoonSun system, where three rotations appear: the daily rotation of the Earth about its axis, the lunarmonth rotation of the EarthMoon system about their center of mass, and the annual revolution of the EarthMoon system about the Sun. These three motions influence the tides.^{[37]}
Figure 5 shows another example comparing the observations of an inertial observer with those of an observer on a rotating carousel.^{[38]} The carousel rotates at a constant angular velocity represented by the vector Ω with magnitude ω, pointing upward according to the righthand rule. A rider on the carousel walks radially across it at constant speed, in what appears to the walker to be the straight line path inclined at 45° in Figure 5 . To the stationary observer, however, the walker travels a spiral path. The points identified on both paths in Figure 5 correspond to the same times spaced at equal time intervals. We ask how two observers, one on the carousel and one in an inertial frame, formulate what they see using Newton's laws.
The observer at rest describes the path followed by the walker as a spiral. Adopting the coordinate system shown in Figure 5, the trajectory is described by r(t):
where the added π/4 sets the path angle at 45° to start with (just an arbitrary choice of direction), u_{R} is a unit vector in the radial direction pointing from the center of the carousel to the walker at time t. The radial distance R(t) increases steadily with time according to:
with s the speed of walking. According to simple kinematics, the velocity is then the first derivative of the trajectory:
with u_{θ} a unit vector perpendicular to u_{R} at time t (as can be verified by noticing that the vector dot product with the radial vector is zero) and pointing in the direction of travel. The acceleration is the first derivative of the velocity:
The last term in the acceleration is radially inward of magnitude ω^{2} R, which is therefore the instantaneous centripetal acceleration of circular motion.^{[39]} The first term is perpendicular to the radial direction, and pointing in the direction of travel. Its magnitude is 2sω, and it represents the acceleration of the walker as the edge of the carousel is neared, and the arc of circle traveled in a fixed time increases, as can be seen by the increased spacing between points for equal time steps on the spiral in Figure 5 as the outer edge of the carousel is approached.
Applying Newton's laws, multiplying the acceleration by the mass of the walker, the inertial observer concludes that the walker is subject to two forces: the inward, radially directed centripetal force, and another force perpendicular to the radial direction that is proportional to the speed of the walker.
The rotating observer sees the walker travel a straight line from the center of the carousel to the periphery, as shown in Figure 5. Moreover, the rotating observer sees that the walker moves at a constant speed in the same direction, so applying Newton's law of inertia, there is zero force upon the walker. These conclusions do not agree with the inertial observer. To obtain agreement, the rotating observer has to introduce fictitious forces that appear to exist in the rotating world, even though there is no apparent reason for them, no apparent gravitational mass, electric charge or what have you, that could account for these fictitious forces.
To agree with the inertial observer, the forces applied to the walker must be exactly those found above. They can be related to the general formulas already derived, namely:
In this example, the velocity seen in the rotating frame is:
with u_{R} a unit vector in the radial direction. The position of the walker as seen on the carousel is:
and the time derivative of Ω is zero for uniform angular rotation. Noticing that
and
we find:
To obtain a straightline motion in the rotating world, a force exactly opposite in sign to the fictitious force must be applied to reduce the net force on the walker to zero, so Newton's law of inertia will predict a straight line motion, in agreement with what the rotating observer sees. The fictitious forces that must be combated are the Coriolis force (first term) and the centrifugal force (second term). (These terms are approximate.^{[40]}) By applying forces to counter these two fictitious forces, the rotating observer ends up applying exactly the same forces upon the walker that the inertial observer predicted were needed.
Because they differ only by the constant walking velocity, the walker and the rotational observer see the same accelerations. From the walker's perspective, the fictitious force is experienced as real, and combating this force is necessary to stay on a straight line radial path holding constant speed. It's like battling a crosswind while being thrown to the edge of the carousel.
Notice that this kinematical discussion does not delve into the mechanism by which the required forces are generated. That is the subject of kinetics. In the case of the carousel, the kinetic discussion would involve perhaps a study of the walker's shoes and the friction they need to generate against the floor of the carousel, or perhaps the dynamics of skateboarding, if the walker switched to travel by skateboard. Whatever the means of travel across the carousel, the forces calculated above must be realized. A very rough analogy is heating your house: you must have a certain temperature to be comfortable, but whether you heat by burning gas or by burning coal is another problem. Kinematics sets the thermostat, kinetics fires the furnace.