The Fatty Knees

fibreglass Fiberglass (American English) or fibreglass (Commonwealth English) is a common type of fiber-reinforced plastic using glass fiber. The fibers may be randomly arranged, flattened into a sheet called a chopped strand mat, or woven into glass clo ...

sailing Sailing employs the wind—acting on sails, wingsails or kites—to propel a craft on the surface of the ''water'' (sailing ship, sailboat, raft, windsurfer, or kitesurfer), on ''ice'' (iceboat) or on ''land'' (land yacht) over a chosen cou ...

dinghies A dinghy is a type of small boat, often carried or towed by a larger vessel for use as a tender. Utility dinghies are usually rowboats or have an outboard motor. Some are rigged for sailing but they differ from sailing dinghies, which ...

were designed by Lyle Hess (1912–2002). Produced in 7’ (2.1m), 8’ (2.4m) and 9’ (2.7m) long models. The 8’ model has a 4’ (1.2m) beam. Primarily designed as a

yacht A yacht is a sailing or power vessel used for pleasure, cruising, or racing. There is no standard definition, though the term generally applies to vessels with a cabin intended for overnight use. To be termed a , as opposed to a , such a pleasu ...

tender with good

rowing Rowing is the act of propelling a human-powered watercraft using the sweeping motions of oars to displace water and generate reactional propulsion. Rowing is functionally similar to paddling, but rowing requires oars to be mechanically ...

and

towing Towing is coupling two or more objects together so that they may be pulled by a designated power source or sources. The towing source may be a motorized land vehicle, vessel, animal, or human, and the load being anything that can be pulled. Th ...

characteristics, the boat can be sailed, with enough width in the beam to provide stability. The hull has a

lapstrake Clinker built (also known as lapstrake) is a method of boat building where the edges of hull planks overlap each other. Where necessary in larger craft, shorter planks can be joined end to end, creating a longer strake or hull plank. The techni ...

appearance. The

thwart A thwart is a part of an undecked boat that provides seats for the crew and structural rigidity for the hull. A thwart goes from one side of the hull to the other. There might be just one thwart in a small boat, or many in a larger boat, especial ...

s and dagger-board trunk are fiberglass inserts glassed into the hull and are watertight. It is cat rigged with a Bermuda mainsail. A transom notch allows sculling. Equipped with oarlocks for rowing. A small outboard motor can be mounted to port. Sailing gear is designed to be stored inside the hull. About 2000 dinghies have been produced.

References

External links

* {{DEFAULTSORT:Fatty Knees (Dinghy) Dinghies Sailboat types built in the United States Sailboat type designs by Lyle Hess