Early Bird Jenny
   HOME

TheInfoList



OR:

The Early Bird Jenny is an American
homebuilt aircraft Homebuilt aircraft, also known as amateur-built aircraft or kit planes, are constructed by persons for whom this is not a professional activity. These aircraft may be constructed from "scratch", from plans, or from assembly kits.Armstrong, Kenn ...
that was designed by Dennis Wiley and produced by the Early Bird Aircraft Company of
Erie, Colorado The Town of Erie is a Statutory Town located in Weld and Boulder counties, Colorado, United States. The town population was 30,038 at the 2020 United States Census, a +65.64% increase since the 2010 United States Census. At the 2020 census, 17,3 ...
, also by
Leading Edge Airfoils Leading Edge Air Foils LLC (formerly Leading Edge Air Foils, Inc.), usually called LEAF, is an American aircraft parts supplier based in Lyons, Wisconsin. It is a US limited liability company.Purdy, Don: ''AeroCrafter - Homebuilt Aircraft Sou ...
of
Peyton, Colorado Peyton is an unincorporated town, a post office, and a census-designated place (CDP) located in and governed by El Paso County, Colorado, United States. The CDP is a part of the Colorado Springs, CO Metropolitan Statistical Area. The Peyton post ...
. When it was available the aircraft was supplied as a kit and also in the form of plans for amateur construction.Purdy, Don: ''AeroCrafter - Homebuilt Aircraft Sourcebook, Fifth Edition'', pages 147 and 193. BAI Communications, 15 July 1998.


Design and development

The aircraft is a 67% scale replica of the
First World War World War I (28 July 1914 11 November 1918), often abbreviated as WWI, was one of the deadliest global conflicts in history. Belligerents included much of Europe, the Russian Empire, the United States, and the Ottoman Empire, with fightin ...
Curtiss JN-4 Jenny. It features a strut-braced biplane layout, a two-seats-in-
tandem Tandem, or in tandem, is an arrangement in which a team of machines, animals or people are lined up one behind another, all facing in the same direction. The original use of the term in English was in ''tandem harness'', which is used for two ...
open cockpit, fixed
conventional landing gear Conventional landing gear, or tailwheel-type landing gear, is an aircraft undercarriage consisting of two main wheels forward of the center of gravity and a small wheel or skid to support the tail.Crane, Dale: ''Dictionary of Aeronautical Term ...
and a single engine in
tractor configuration In aviation, the term tractor configuration refers to an aircraft constructed in the standard configuration with its engine mounted with the propeller in front of it so that the aircraft is "pulled" through the air. Oppositely, the pusher co ...
. At the time the kit was first made available the aircraft could be constructed as a US
FAR 103 Ultralight Vehicles Ultralight aircraft in the United States are much smaller and lighter than ultralight aircraft as defined by all other countries. In the United States, ultralights are described as "ultralight vehicles" and not as aircraft. They are not req ...
exemption two-seat trainer or as an amateur-built aircraft. The Jenny is made from a mix of steel and
aluminum Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. It ha ...
tubing, with some wooden parts and its flying surfaces covered with doped
aircraft fabric Aircraft fabric covering is a term used for both the material used and the process of covering aircraft open structures. It is also used for reinforcing closed plywood structures. The de Havilland Mosquito is an example of this technique, as are ...
. Its span wing has a wing area of and the cockpit width is . The acceptable power range is and the standard engines used are the
Rotax 503 The Rotax 503 is a , inline 2-cylinder, two-stroke aircraft engine, built by BRP-Rotax GmbH & Co. KG of Austria for use in ultralight aircraft.Raisner, William: ''LEAF catlog'', pages 6-105. Leading Edge Airfoils, 1995. As of 2011 the Rot ...
,
Rotax 532 The Rotax 532 is a two-stroke, two-cylinder, rotary valve engine, liquid-cooled, gear reduction-drive engine that was formerly manufactured by BRP-Rotax GmbH & Co. KG. It was designed for use on ultralight aircraft.Raisner, William: ''LEAF cat ...
,
Rotax 582 The Rotax 582 is a two-stroke, two-cylinder, rotary intake valve, oil-in-fuel or oil injection pump, liquid-cooled, gear reduction-drive aircraft engine manufactured by BRP-Rotax GmbH & Co. KG. It is for use in non-certified aircraft operating ...
,
Rotax 618 The Rotax 618 is a two-stroke, two-cylinder, liquid cooled, gear reduction-drive engine that was formerly manufactured by BRP-Rotax GmbH & Co. KG. It was designed for use on ultralight aircraft.Raisner, William: ''LEAF catalog'', pages 6-105. ...
two-stroke A two-stroke (or two-stroke cycle) engine is a type of internal combustion engine that completes a power cycle with two strokes (up and down movements) of the piston during one power cycle, this power cycle being completed in one revolution of ...
engines and the
Geo Metro The Geo Metro is a marketing and manufacturing variation of the Suzuki Cultus available in North America from 1989 through 2001 as a joint effort of General Motors (GM) and Suzuki. In the US, the Metro carried a Geo nameplate from 1989 through ...
-based
fuel injected Fuel injection is the introduction of fuel in an internal combustion engine, most commonly automotive engines, by the means of an injector. This article focuses on fuel injection in reciprocating piston and Wankel rotary engines. All comp ...
Raven 1000 UL The Raven 1000 UL is an American aircraft engine, that was designed and produced by Raven Redrives of El Prado, New Mexico for use in ultralight and homebuilt aircraft.Bayerl, Robby; Martin Berkemeier; et al: ''World Directory of Leisure Aviati ...
three cylinder, inline, liquid-cooled,
four stroke A four-stroke (also four-cycle) engine is an internal combustion (IC) engine in which the piston completes four separate strokes while turning the crankshaft. A stroke refers to the full travel of the piston along the cylinder, in either directi ...
automotive conversion powerplant. The aircraft has a typical empty weight of and a gross weight of , giving a useful load of . With full fuel of the payload for pilot, passenger and baggage is . The supplied kit included the Rotax 503 engine. The manufacturer estimated the aircraft's construction time from the kit to be 500 hours.


Operational history

By 1998 the company reported that 53 kits had been sold and 24 aircraft were flying.


Specifications (Jenny)


References


External links

{{LEAF aircraft
Jenny Jenny may refer to: * Jenny (given name), a popular feminine name and list of real and fictional people * Jenny (surname), a family name Animals * Jenny (donkey), a female donkey * Jenny (gorilla), the oldest gorilla in captivity at the time of ...
1990s United States sport aircraft 1990s United States ultralight aircraft Single-engined tractor aircraft Biplanes Homebuilt aircraft Leading Edge Air Foils aircraft Replica aircraft