Device encryption

BitLocker is a full volume encryption feature included with Microsoft Windows versions starting with Windows Vista. It is designed to protect data by providing encryption for entire volumes. By default, it uses the AES encryption algorithm in cipher block chaining (CBC) or XTS mode with a 128-bit or 256-bit key. CBC is not used over the whole disk; it is applied to each individual sector.

History

BitLocker originated as a part of Microsoft's Next-Generation Secure Computing Base architecture in 2004 as a feature tentatively codenamed "Cornerstone" and was designed to protect information on devices, particularly if a device was lost or stolen; another feature, titled "Code Integrity Rooting", was designed to validate the integrity of Microsoft Windows boot and system files. When used in conjunction with a compatible Trusted Platform Module (TPM), BitLocker can validate the integrity of boot and system files before decrypting a protected volume; an unsuccessful validation will prohibit access to a protected system. BitLocker was briefly called Secure Startup before Windows Vista's release to manufacturing.

BitLocker is available on:
* Ultimate and Enterprise editions of Windows Vista and Windows 7
* Pro and Enterprise editions of Windows 8 and 8.1
* Pro, Enterprise, and Education editions of Windows 10
* Pro, Enterprise, and Education editions of Windows 11
* Windows Server 2008 and later

Features

Initially, the graphical BitLocker interface in Windows Vista could only encrypt the operating system volume. Starting with Windows Vista with Service Pack 1 and Windows Server 2008, volumes other than the operating system volume could be encrypted using the graphical tool. Still, some aspects of the BitLocker (such as turning autolocking on or off) had to be managed through a command-line tool called manage-bde.wsf.

The version of BitLocker included in Windows 7 and Windows Server 2008 R2 adds the ability to encrypt removable drives. On Windows XP or Windows Vista, read-only access to these drives can be achieved through a program called BitLocker To Go Reader, if FAT16, FAT32 or exFAT filesystems are used. In addition, a new command-line tool called manage-bde replaced the old manage-bde.wsf.

Starting with Windows Server 2012 and Windows 8, Microsoft has complemented BitLocker with the Microsoft Encrypted Hard Drive specification, which allows the cryptographic operations of BitLocker encryption to be offloaded to the storage device's hardware. In addition, BitLocker can now be managed through Windows PowerShell. Finally, Windows 8 introduced Windows To Go in its Enterprise edition, which BitLocker can protect.

Device encryption

Windows Mobile 6.5, Windows RT and core editions of Windows 8.1 include device encryption, a feature-limited version of BitLocker that encrypts the whole system. Logging in with a Microsoft account with administrative privileges automatically begins the encryption process. The recovery key is stored to either the Microsoft account or Active Directory, allowing it to be retrieved from any computer. While device encryption is offered on all versions of 8.1, unlike BitLocker, device encryption requires that the device meet the InstantGo (formerly Connected Standby) specifications, which requires solid-state drives, non-removable RAM (to protect against cold boot attacks) and a TPM 2.0 chip.

Starting with Windows 10 1703, the requirements for device encryption have changed, requiring a TPM 1.2 or 2.0 module with PCR 7 support, UEFI Secure Boot, and that the device meets Modern Standby requirements or HSTI validation.

In September 2019 a new update was released (KB4516071) changing the default setting for BitLocker when encrypting a self-encrypting hard drive. Now, the default is to use software encryption for newly encrypted drives. This is due to hardware encryption flaws and security concerns related to those issues.

Encryption modes

Three authentication mechanisms can be used as building blocks to implement BitLocker encryption:
* Transparent operation mode: This mode uses the capabilities of TPM 1.2 hardware to provide for transparent user experience—the user powers up and logs into Windows as usual. The key used for disk encryption is sealed (encrypted) by the TPM chip and will only be released to the OS loader code if the early boot files appear to be unmodified. The pre-OS components of BitLocker achieve this by implementing a Static Root of Trust Measurement—a methodology specified by the Trusted Computing Group (TCG). This mode is vulnerable to a cold boot attack, as it allows a powered-down machine to be booted by an attacker. It is also vulnerable to a sniffing attack, as the volume encryption key is transferred in plain text from the TPM to the CPU during a successful boot.
* User authentication mode: This mode requires that the user provide some authentication to the pre-boot environment in the form of a pre-boot PIN or password.
* USB Key Mode: The user must insert a USB device that contains a startup key into the computer to be able to boot the protected OS. Note that this mode requires that the BIOS on the protected machine supports the reading of USB devices in the pre-OS environment. BitLocker does not support smart cards for pre-boot authentication.

The following combinations of the above authentication mechanisms are supported, all with an optional escrow recovery key:
* TPM only
* TPM + PIN
* TPM + PIN + USB Key
* TPM + USB Key
* USB Key
* Password only

Operation

BitLocker is a logical volume encryption system. (A volume spans part of a hard disk drive, the whole drive or more than one drive.) When enabled, TPM and BitLocker can ensure the integrity of the trusted boot path (e.g. BIOS and boot sector), in order to prevent most offline physical attacks and boot sector malware.

In order for BitLocker to encrypt the volume holding the operating system, at least two NTFS-formatted volumes are required: one for the operating system (usually C:) and another with a minimum size of 100 MB, which remains unencrypted and boots the operating system. (In case of Windows Vista and Windows Server 2008, however, the volume's minimum size is 1.5 GB and must have a drive letter.) Unlike previous versions of Windows, Vista's "diskpart" command-line tool includes the ability to shrink the size of an NTFS volume so that this volume may be created from already allocated space. A tool called the BitLocker Drive Preparation Tool is also available from Microsoft that allows an existing volume on Windows Vista to be shrunk to make room for a new boot volume and for the necessary bootstrapping files to be transferred to it.

Once an alternate boot partition has been created, the TPM module needs to be initialized (assuming that this feature is being used), after which the required disk-encryption key protection mechanisms such as TPM, PIN or USB key are configured. The volume is then encrypted as a background task, something that may take a considerable amount of time with a large disk as every logical sector is read, encrypted and rewritten back to disk. The keys are only protected after the whole volume has been encrypted when the volume is considered secure. BitLocker uses a low-level device driver to encrypt and decrypt all file operations, making interaction with the encrypted volume transparent to applications running on the platform.

Encrypting File System (EFS) may be used in conjunction with BitLocker to provide protection once the operating system is running. Protection of the files from processes and users within the operating system can only be performed using encryption software that operates within Windows, such as EFS. BitLocker and EFS, therefore, offer protection against different classes of attacks.

In Active Directory environments, BitLocker supports optional key escrow to Active Directory, although a schema update may be required for this to work (i.e. if the Active Directory Services are hosted on a Windows version previous to Windows Server 2008).

BitLocker and other full disk encryption systems can be attacked by a rogue boot manager. Once the malicious bootloader captures the secret, it can decrypt the Volume Master Key (VMK), which would then allow access to decrypt or modify any information on an encrypted hard disk. By configuring a TPM to protect the trusted boot pathway, including the BIOS and boot sector, BitLocker can mitigate this threat. (Note that some non-malicious changes to the boot path may cause a Platform Configuration Register check to fail, and thereby generate a false warning.)

Security concerns

TPM alone is not enough

The "Transparent operation mode" and "User authentication mode" of BitLocker use TPM hardware to detect if there are unauthorized changes to the pre-boot environment, including the BIOS and MBR. If any unauthorized changes are detected, BitLocker requests a recovery key on a USB device. This cryptographic secret is used to decrypt the Volume Master Key (VMK) and allow the bootup process to continue. However, TPM alone is not enough:

* In February 2008, a group of security researchers published details of a so-called "cold boot attack" that allows full disk encryption systems such as BitLocker to be compromised by booting the machine from removable media, such as a USB drive, into another operating system, then dumping the contents of pre-boot memory. The attack relies on the fact that DRAM retains information for up to several minutes (or even longer, if cooled) after the power has been removed. The Bress/Menz device, described in US Patent 9,514,789, can accomplish this type of attack. Similar full disk encryption mechanisms of other vendors and other operating systems, including Linux and Mac OS X, are vulnerable to the same attack. The authors recommend that computers be powered down when not in physical control of the owner (rather than be left in a sleep mode) and that the encryption software be configured to require a password to boot the machine.

* On 10 November 2015, Microsoft released a security update to mitigate a security vulnerability in BitLocker that allowed authentication to be bypassed by employing a malicious Kerberos key distribution center, if the attacker had physical access to the machine, the machine was part of a domain and had no PIN or USB flash drive protection.
* BitLocker still does not properly support TPM 2.0 security features which, as a result, can lead to a complete bypass of privacy protection when keys are transmitted over Serial Peripheral Interface in a motherboard.

All these attacks require physical access to the system and are thwarted by a secondary protector such as a USB flash drive or PIN code.

Upholding Kerckhoffs's principle

Although the AES encryption algorithm used in BitLocker is in the public domain, its implementation in BitLocker, as well as other components of the software, are proprietary