Cylinder blown sheet is a type of hand- blown window

glass Glass is a non-crystalline, often transparent, amorphous solid that has widespread practical, technological, and decorative use in, for example, window panes, tableware, and optics. Glass is most often formed by rapid cooling ( quenching ...

. It is created with a similar process to

broad sheet Broad sheet is a type of hand-blown glass. It was first made in Sussex in 1226. Production It is made by blowing molten glass into an elongated tube shape with a blowpipe. Then, while the glass is still hot, the ends are cut off and the resu ...

, but with the use of larger cylinders. In this manufacturing process glass is blown into a cylindrical iron mold. The ends are cut off and a cut is made down the side of the cylinder. The cut cylinder is then placed in an oven where the cylinder unrolls into a flat glass sheet. William J. Blenko used this method in the early 1900s to make stained glass. The result is much larger panes and improved surface quality over broad sheet, although still containing some imperfections. These imperfect panes have led to the misconception that glass is actually a high-viscosity fluid at room temperature, which is not the case. This method caused surface damages on the glass due to the flattening and moving, and the sheet therefore had to be ground and polished. In 1839 the

Chance Brothers Chance Brothers and Company was a glassworks originally based in Spon Lane, Smethwick, West Midlands (formerly in Staffordshire), in England. It was a leading glass manufacturer and a pioneer of British glassmaking technology. The Chance fam ...

invented the patent plate process where the glass plate was placed on a wet piece of leather and ground and polished to remove all the surface damage.Contribution of the glass cladding to the overall structural behaviour of 19th-century iron and glass roofs
/ref> Other methods of producing hand-blown window glass included

blown plate Blown plate is a hand-blown glass. There is a record of blown plate being produced in London in 1620. Production Blown plate was made by hand-grinding broad sheet glass. As the process was labour-intensive, and expensive, blown plate was mainly use ...

, crown glass and

polished plate Polished plate is a type of hand-made glass. It is produced by casting glass onto a table and then subsequently grinding and polishing the glass. This was originally done by hand, and then later by machine. It was an expensive process requiring a la ...

. These methods of manufacture lasted at least until the end of the 19th century. The early 20th century marks the move away from hand-blown to machine manufactured glass such as

rolled plate Rolling is a type of motion that combines rotation (commonly, of an axially symmetric object) and translation of that object with respect to a surface (either one or the other moves), such that, if ideal conditions exist, the two are in contact ...

machine drawn cylinder sheet Machine drawn cylinder sheet was the first mechanical method for "drawing" window glass. Cylinders of glass 40 feet (12 m) high are drawn vertically from a circular tank. The glass is then annealed and cut into 7 to 10 foot (2 to 3 ...

, the Fourcault process of flat drawn sheet,

single and twin ground polished plate Single may refer to: Arts, entertainment, and media * Single (music), a song release Songs * "Single" (Natasha Bedingfield song), 2004 * "Single" (New Kids on the Block and Ne-Yo song), 2008 * "Single" (William Wei song), 2016 * "Single", by ...

and most common, float glass. Cylinder blown sheet glass was manufactured in the UK in the mid 19th century. It had been manufactured in France and Germany (and imported to the UK) since the 18th century.

References

* {{Glass forming Glass production