Composition C
   HOME

TheInfoList



OR:

The Composition C family is a family of related US-specified
plastic explosive Plastic explosive is a soft and hand-moldable solid form of explosive material. Within the field of explosives engineering, plastic explosives are also known as putty explosives or blastics. Plastic explosives are especially suited for explo ...
s consisting primarily of RDX. All can be moulded by hand for use in demolition work and packed by hand into
shaped charge A shaped charge is an explosive charge shaped to form an explosively formed penetrator (EFP) to focus the effect of the explosive's energy. Different types of shaped charges are used for various purposes such as cutting and forming metal, ini ...
devices. Variants have different proportions and plasticisers and include composition C-2, composition C-3, and composition C-4.


History

The term ''composition'' is used for any explosive material compounded from several ingredients. In particular, in the 1940s the format "Composition " was used for various compositions of the (relatively) novel explosive RDX, such as
Composition B Composition B, colloquially Comp B, is an explosive consisting of castable mixtures of RDX and TNT. It is used as the main explosive filling in artillery projectiles, rockets, land mines, hand grenades and various other munitions. It was also ...
and other variants.


Development

The original material was developed by the British during
World War II World War II or the Second World War, often abbreviated as WWII or WW2, was a world war that lasted from 1939 to 1945. It involved the vast majority of the world's countries—including all of the great powers—forming two opposing ...
, and was used in the Gammon bomb. It was standardised as Composition C when introduced to US service. This material consisted of 88.3% RDX and a mineral oil-based plasticiser and phlegmatiser. It suffered from a relatively limited range of serviceable temperatures, and was replaced by Composition C-2 around 1943.


Composition

Composition C-1 contained a slightly smaller proportion of RDX, but used an explosive plasticiser, which contained
tetryl 2,4,6-Trinitrophenylmethylnitramine commonly referred to as tetryl ( C7 H5 N5 O8) is an explosive compound used to make detonators and explosive booster charges. Tetryl is a nitramine booster explosive, though its use has been largely superseded ...
,
nitrocellulose Nitrocellulose (also known as cellulose nitrate, flash paper, flash cotton, guncotton, pyroxylin and flash string, depending on form) is a highly flammable compound formed by nitrating cellulose through exposure to a mixture of nitric acid and ...
and a mixture of nitroaromatics produced during the manufacture of TNT (containing
trinitrotoluene Trinitrotoluene (), more commonly known as TNT, more specifically 2,4,6-trinitrotoluene, and by its preferred IUPAC name 2-methyl-1,3,5-trinitrobenzene, is a chemical compound with the formula C6H2(NO2)3CH3. TNT is occasionally used as a reage ...
, dinitrotoluene and mononitrotoluene), and a trace of solvent.


Characteristics and usage

Composition C-3 was very similar to Composition C-1, but removed the solvent and varied the exact proportions of plasticisers to improve high temperature storage. It is a yellow, putty-like material. It remained a service item through the
Korean War , date = {{Ubl, 25 June 1950 – 27 July 1953 (''de facto'')({{Age in years, months, weeks and days, month1=6, day1=25, year1=1950, month2=7, day2=27, year2=1953), 25 June 1950 – present (''de jure'')({{Age in years, months, weeks a ...
, but had marginal plasticity at the very low temperatures encountered in Korean winters, and was significantly toxic, including by vapour and skin absorption. While Composition C-3 had a much wider serviceable temperature range than Composition C, it could not be stored at elevated temperatures. Consequently, it was replaced around 1944 by Composition C-4. The
velocity of detonation Explosive velocity, also known as detonation velocity or velocity of detonation (VoD), is the velocity at which the shock wave front travels through a detonated explosive. Explosive velocities are always faster than the local speed of sound in the ...
is about 7600 m/s (25,000 feet per second.) Composition C-3 consists of 77%–85% cyclonite ( RDX) and 15%–23% gel made out of liquid nitro compounds (e.g. liquid DNT and small amount of NT) and nitrocellulose or butyl phthalate and nitrocellulose. One of the first reported and tested compositions of C-3 was very similar to earlier Composition C-2 and contained 77% RDX, 3%
tetryl 2,4,6-Trinitrophenylmethylnitramine commonly referred to as tetryl ( C7 H5 N5 O8) is an explosive compound used to make detonators and explosive booster charges. Tetryl is a nitramine booster explosive, though its use has been largely superseded ...
, 4%
TNT Trinitrotoluene (), more commonly known as TNT, more specifically 2,4,6-trinitrotoluene, and by its preferred IUPAC name 2-methyl-1,3,5-trinitrobenzene, is a chemical compound with the formula C6H2(NO2)3CH3. TNT is occasionally used as a reagen ...
, 1% NC, 5% NT, and 10% DNT. The last two compounds (they are very poor explosives) are oily liquids and plasticise the mixture. The most important later innovation of C-3 introduced the non-explosive
plasticiser A plasticizer ( UK: plasticiser) is a substance that is added to a material to make it softer and more flexible, to increase its plasticity, to decrease its viscosity, and/or to decrease friction during its handling in manufacture. Plasticize ...
butyl phthalate instead of this mixture of nitro compounds. This reduced the toxicity while increasing the concentration of RDX and improving safety of use and storage. It also opened the way to begin study of new non-explosive low-toxicity plasticisers (esters of dicarboxylic acid) and binder (branched
polymers A polymer (; Greek '' poly-'', "many" + ''-mer'', "part") is a substance or material consisting of very large molecules called macromolecules, composed of many repeating subunits. Due to their broad spectrum of properties, both synthetic an ...
).


Discovery

Research on a replacement for C-2 was begun prior to 1950, but the new material, new generation of Composition C ( number four, C-4), did not begin pilot production until 1956.


Properties

Since 1960 the mixture of C-4 has contained: * 90.0–91.0% of cyclonite ( RDX explosives) * ~2.1% of polyisobutylene (short chain) * ~1.6% of motor oil * ~5.3% of di-(2-ethylhexyl)sebacate (dioctyl sebacate), sometimes it was replaced partly by similar compounds such as dioctyl adipate * less than 0.6% of water * (small amount of marker or odorising taggant) It is less volatile than C-3 and has less tendency to harden at low temperature. It has a density 1.48–1.60g/ml, does not become hard even at −55 °C (−67 °F), and does not exude at +77 °C (171 °F). C4 has a detonation velocity of 8092 m/s (26550 ft/s) at high density and velocity of 7550 m/s (24770 ft/s) at low density 1.48 g/ml. It is so successful that it remains in
army An army (from Old French ''armee'', itself derived from the Latin verb ''armāre'', meaning "to arm", and related to the Latin noun ''arma'', meaning "arms" or "weapons"), ground force or land force is a fighting force that fights primarily on ...
service up to the current time without any significant changes.


See also

* Composition C4 *
Composition B Composition B, colloquially Comp B, is an explosive consisting of castable mixtures of RDX and TNT. It is used as the main explosive filling in artillery projectiles, rockets, land mines, hand grenades and various other munitions. It was also ...
*
Composition H6 __NOTOC__ Composition H6 is a castable military explosive mixture composed of the following percentages by weight: * 44.0% RDX * 29.5% TNT * 21.0% powdered aluminium * 5.0% paraffin wax as a phlegmatizing agent. * 0.5% calcium chloride H6 i ...
* Plasticisers for energetic materials *
Polymer-bonded explosive Polymer-bonded explosives, also called PBX or plastic-bonded explosives, are explosive materials in which explosive powder is bound together in a matrix using small quantities (typically 5–10% by weight) of a synthetic polymer. PBXs are normally ...
*
RE factor TNT equivalent is a convention for expressing energy, typically used to describe the energy released in an explosion. The is a unit of energy defined by that convention to be , which is the approximate energy released in the detonation of a m ...
*
Semtex Semtex is a general-purpose plastic explosive containing RDX and PETN. It is used in commercial blasting, demolition, and in certain military applications. Semtex was developed and manufactured in Czechoslovakia, originally under the name B 1 ...


References

{{Reflist Explosives