The technique of composite ship construction (

wood Wood is a porous and fibrous structural tissue found in the stems and roots of trees and other woody plants. It is an organic materiala natural composite of cellulose fibers that are strong in tension and embedded in a matrix of lignin ...

en planking over a

wrought iron Wrought iron is an iron alloy with a very low carbon content (less than 0.08%) in contrast to that of cast iron (2.1% to 4%). It is a semi-fused mass of iron with fibrous slag inclusions (up to 2% by weight), which give it a wood-like "grain" ...

frame) emerged in the mid-19th century as the final stage in the evolution of fast commercial

sailing ship A sailing ship is a sea-going vessel that uses sails mounted on masts to harness the power of wind and propel the vessel. There is a variety of sail plans that propel sailing ships, employing square-rigged or fore-and-aft sails. Some ships ...

s. Construction of

hulled vessels had begun in the 1820s and was a

mature technology A mature technology is a technology that has been in use for long enough that most of its initial faults and inherent problems have been removed or reduced by further development. In some contexts, it may also refer to technology that has not se ...

by the time of the launch of the SS ''Great Britain'' in 1843. However, iron hulls could not be sheathed with

copper alloy Copper alloys are metal alloys that have copper as their principal component. They have high resistance against corrosion. The best known traditional types are bronze, where tin is a significant addition, and brass, using zinc instead. Both of t ...

(due to bimetallic corrosion) and so would become festooned with drag-inducing weed during long voyages in the tropics. The wooden planking of a composite ship allowed the

copper sheathing Copper sheathing is the practice of protecting the under-water hull of a ship or boat from the corrosive effects of salt water and biofouling through the use of copper plates affixed to the outside of the hull. It was pioneered and developed b ...

essential for fast ocean crossings under sail while the iron frame made the ship relatively immune from

hogging and sagging In solid mechanics, structural engineering, and shipbuilding, hogging and sagging describe the shape that a beam or similar long object will deform into when loading is applied. ''Hogging'' describes a beam that curves upwards in the middle, and ...

, and took up less interior space than wooden framing. The brief reign of composite

clipper A clipper was a type of mid-19th-century merchant sailing vessel, designed for speed. Clippers were generally narrow for their length, small by later 19th century standards, could carry limited bulk freight, and had a large total sail area. "Cl ...

s as the fastest mode of transport between

Europe Europe is a large peninsula conventionally considered a continent in its own right because of its great physical size and the weight of its history and traditions. Europe is also considered a Continent#Subcontinents, subcontinent of Eurasia ...

and

Asia Asia (, ) is one of the world's most notable geographical regions, which is either considered a continent in its own right or a subcontinent of Eurasia, which shares the continental landmass of Afro-Eurasia with Africa. Asia covers an are ...

was brought to a close by the opening of the

Suez Canal The Suez Canal ( arz, قَنَاةُ ٱلسُّوَيْسِ, ') is an artificial sea-level waterway in Egypt, connecting the Mediterranean Sea to the Red Sea through the Isthmus of Suez and dividing Africa and Asia. The long canal is a popula ...

in 1869 and ongoing improvement in the performance of steam ships. Composite construction was also used for some steamships. An idea of the proportion of composite ships built can be gained from the statistics for vessels constructed on the Clyde (and tributaries thereof) in 1869. Of the 206 ships launched there in the year, 22 were of composite construction, compared to 168 of iron and 16 of wood. Of the 22 composite vessels, 16 were sailing ships and 6 steamers. Today only five ships of this type survive, in various states of preservation or decay. * ''City of Adelaide'' (1864), Passenger Clipper, Transported to

Port Adelaide Port Adelaide is a port-side region of Adelaide, approximately northwest of the Adelaide city centre, Adelaide CBD. It is also the namesake of the City of Port Adelaide Enfield council, a suburb, a federal and state electoral division and is t ...

South Australia South Australia (commonly abbreviated as SA) is a States and territories of Australia, state in the southern central part of Australia. It covers some of the most arid parts of the country. With a total land area of , it is the fourth-largest o ...

, in February 2014; currently on barge, awaiting selection of final shore-based location *''

Cutty Sark ''Cutty Sark'' is a British clipper ship. Built on the River Leven, Dumbarton, Scotland in 1869 for the Jock Willis Shipping Line, she was one of the last tea clippers to be built and one of the fastest, coming at the end of a long period ...

'' (1869), Tea Clipper, Restored,

Greenwich Greenwich ( , ,) is a town in south-east London, England, within the ceremonial county of Greater London. It is situated east-southeast of Charing Cross. Greenwich is notable for its maritime history and for giving its name to the Greenwich ...

England England is a country that is part of the United Kingdom. It shares land borders with Wales to its west and Scotland to its north. The Irish Sea lies northwest and the Celtic Sea to the southwest. It is separated from continental Europe ...

*''

Ambassador An ambassador is an official envoy, especially a high-ranking diplomat who represents a state and is usually accredited to another sovereign state or to an international organization as the resident representative of their own government or s ...

'' (1869), Tea Clipper, Beached skeleton, Estancia San Gregorio,

Chile Chile, officially the Republic of Chile, is a country in the western part of South America. It is the southernmost country in the world, and the closest to Antarctica, occupying a long and narrow strip of land between the Andes to the eas ...

* HMS ''Gannet'' (1878), Naval

Sloop A sloop is a sailboat with a single mast typically having only one headsail in front of the mast and one mainsail aft of (behind) the mast. Such an arrangement is called a fore-and-aft rig, and can be rigged as a Bermuda rig with triangular sa ...

, Restored, Chatham, England * ''Darra'' beached wreck, Ōtamahua / Quail Island, Lyttelton Harbour / Whakaraupō, New ZealandDarra - New Zealand Maritime Record
NZ National Maritime Museum . Retrieved 12 May 2018.

References

{{DEFAULTSORT:Composite Ship Shipbuilding Sailing ship components Clippers

Further reading

References