telecommunication Telecommunication is the transmission of information by various types of technologies over wire, radio, optical, or other electromagnetic systems. It has its origin in the desire of humans for communication over a distance greater than that ...

and

signal processing Signal processing is an electrical engineering subfield that focuses on analyzing, modifying and synthesizing '' signals'', such as sound, images, and scientific measurements. Signal processing techniques are used to optimize transmissions, ...

, companding (occasionally called compansion) is a method of mitigating the detrimental effects of a channel with limited

dynamic range Dynamic range (abbreviated DR, DNR, or DYR) is the ratio between the largest and smallest values that a certain quantity can assume. It is often used in the context of signals, like sound and light. It is measured either as a ratio or as a base ...

. The name is a

portmanteau A portmanteau word, or portmanteau (, ) is a blend of wordscompressing and expanding, which are the functions of a compander at the transmitting and receiving end respectively. The use of companding allows signals with a large dynamic range to be transmitted over facilities that have a smaller dynamic range capability. Companding is employed in

telephony Telephony ( ) is the field of technology involving the development, application, and deployment of telecommunication services for the purpose of electronic transmission of voice, fax, or data, between distant parties. The history of telephony is i ...

and other audio applications such as professional

wireless microphone A wireless microphone, or cordless microphone, is a microphone without a physical cable connecting it directly to the sound recording or amplifying equipment with which it is associated. Also known as a radio microphone, it has a small, battery ...

s and

analog recording Analog recording is a technique used for the recording of analog signals which, among many possibilities, allows analog audio for later playback. Analog audio recording began with mechanical systems such as the phonautograph and phonograph. L ...

How it works

The dynamic range of a signal is compressed before

transmission Transmission may refer to: Medicine, science and technology * Power transmission ** Electric power transmission ** Propulsion transmission, technology allowing controlled application of power *** Automatic transmission *** Manual transmission ** ...

and is expanded to the original value at the receiver. The electronic circuit that does this is called a compander and works by compressing or expanding the

of an analog electronic signal such as sound recorded by a microphone. One variety is a triplet of amplifiers: a logarithmic amplifier, followed by a variable-gain linear amplifier and an exponential amplifier. Such a triplet has the property that its output voltage is proportional to the input voltage raised to an adjustable power. Companded quantization is the combination of three functional building blocks – namely, a (continuous-domain) signal dynamic range ''compressor'', a limited-range uniform quantizer, and a (continuous-domain) signal dynamic range ''expander'' that inverts the compressor function. This type of quantization is frequently used in telephony systems.W. R. Bennett,
Spectra of Quantized Signals
, ''

Bell System Technical Journal The ''Bell Labs Technical Journal'' is the in-house scientific journal for scientists of Nokia Bell Labs, published yearly by the IEEE society. The managing editor is Charles Bahr. The journal was originally established as the ''Bell System Tech ...

'', Vol. 27, pp. 446–472, July 1948. Robert M. Gray and David L. Neuhoff, "Quantization", '' IEEE Transactions on Information Theory'', Vol. IT-44, No. 6, pp. 2325–2383, Oct. 1998. In practice, companders are designed to operate according to relatively simple dynamic range compressor functions that are designed to be suitable for implementation using simple analog electronic circuits. The two most popular compander functions used for telecommunications are the

A-law An A-law algorithm is a standard companding algorithm, used in European 8-bit PCM digital communications systems to optimize, i.e. modify, the dynamic range of an analog signal for digitizing. It is one of two versions of the G.711 standar ...

and μ-law functions.

Applications

Companding is used in digital telephony systems, compressing before input to an

analog-to-digital converter In electronics, an analog-to-digital converter (ADC, A/D, or A-to-D) is a system that converts an analog signal, such as a sound picked up by a microphone or light entering a digital camera, into a digital signal. An ADC may also provide ...

, and then expanding after a

digital-to-analog converter In electronics, a digital-to-analog converter (DAC, D/A, D2A, or D-to-A) is a system that converts a digital signal into an analog signal. An analog-to-digital converter (ADC) performs the reverse function. There are several DAC archit ...

. This is equivalent to using a non-linear ADC as in a

T-carrier The T-carrier is a member of the series of carrier systems developed by AT&T Bell Laboratories for digital transmission of multiplexed telephone calls. The first version, the Transmission System 1 (T1), was introduced in 1962 in the Bell ...

telephone system that implements

or μ-law companding. This method is also used in digital file formats for better signal-to-noise ratio (SNR) at lower bit depths. For example, a linearly encoded 16-bit PCM signal can be converted to an 8-bit WAV or AU file while maintaining a decent SNR by compressing before the transition to 8-bit and expanding after conversion back to 16-bit. This is effectively a form of lossy

audio data compression In information theory, data compression, source coding, or bit-rate reduction is the process of encoding information using fewer bits than the original representation. Any particular compression is either lossy or lossless. Lossless compressi ...

. Professional

s do this since the dynamic range of the microphone audio signal itself is larger than the dynamic range provided by radio transmission. Companding also reduces the noise and crosstalk levels at the receiver. Companders are used in concert audio systems and in some

noise reduction scheme Noise reduction is the process of removing noise from a signal. Noise reduction techniques exist for audio and images. Noise reduction algorithms may distort the signal to some degree. Noise rejection is the ability of a circuit to isolate an un ...

History

The use of companding in an analog picture transmission system was patented by A. B. Clark of

AT&T AT&T Inc. is an American multinational telecommunications holding company headquartered at Whitacre Tower in Downtown Dallas, Texas. It is the world's largest telecommunications company by revenue and the third largest provider of mobile te ...

in 1928 (filed in 1925): In 1942, Clark and his team completed the SIGSALY secure voice transmission system that included the first use of companding in a PCM (digital) system. In 1953, B. Smith showed that a nonlinear DAC could be complemented by the inverse nonlinearity in a successive-approximation ADC configuration, simplifying the design of digital companding systems. In 1970, H. Kaneko developed the uniform description of segment (piecewise linear) companding laws that had by then been adopted in digital telephony. In the 1980s (and '90s), many of the music equipment manufacturers ( Roland,

Yamaha Yamaha may refer to: * Yamaha Corporation, a Japanese company with a wide range of products and services, established in 1887. The company is the largest shareholder of Yamaha Motor Company (below). ** Yamaha Music Foundation, an organization estab ...

Korg , founded as Keio Electronic Laboratories, is a Japanese multinational corporation that manufactures electronic musical instruments, audio processors and guitar pedals, recording equipment, and electronic tuners. Under the Vox brand name, th ...

) used companding when compressing the library waveform data in their digital synthesizers. Unfortunately exact algorithms are not known, neither if any of the manufacturers ever used the Companding scheme which is described in this article. The only known thing is that manufacturers did use data compression in the mentioned time period and that some people refer to it as "companding" while in reality it might mean something else, for example data compression and expansion.Dave Polich, sound designer, 13th January 2018 https://www.gearslutz.com/board/showpost.php?p=13068220&postcount=146 This dates back to the late '80s when memory chips were often one of the most costly components in the instrument. Manufacturers usually quoted the amount of memory in its compressed form: i.e. 24 MB of physical waveform ROM in a Korg Trinity is actually 48 MB when uncompressed. Similarly, Roland SR-JV expansion boards were usually advertised as 8 MB boards with '16 MB-equivalent content'. Careless copying of this technical information, omitting the "equivalence" reference, can often cause confusion.

References

External links

Companding: Logarithmic Laws, Implementation, and Consequences
{{Compression Methods Lossy compression algorithms Audio engineering Sound recording technology