British Approvals Board for Telecommunications
   HOME

TheInfoList



OR:

The British Approvals Board for Telecommunications (BABT) is a telecommunications certification body.


History


State monopoly

It was established in July 1982 by the UK government to provide type approval services to the
telecommunication Telecommunication is the transmission of information by various types of technologies over wire, radio, optical, or other electromagnetic systems. It has its origin in the desire of humans for communication over a distance greater than that fe ...
s terminal industry. At that point in history, British Telecom was a
state monopoly In economics, a government monopoly or public monopoly is a form of coercive monopoly in which a government agency or government corporation is the sole provider of a particular good or service and competition is prohibited by law. It is a monopo ...
, and even by 1982 BT only allowed (via approval) the four British manufacturers ( STC, GEC, Plessey, and Thorn-Ericsson) to supply its twenty five types of phone through them, and not independently. However around 200,000 unapproved, independently bought phones were being used on the network. Loyalty to BT was of importance (commercially sensitive) to STC, Plessey and GEC as equipment for BT's
exchange Exchange may refer to: Physics *Gas exchange is the movement of oxygen and carbon dioxide molecules from a region of higher concentration to a region of lower concentration. Places United States * Exchange, Indiana, an unincorporated community * ...
s was made exclusively by them. In the same year, BT was becoming more commercially minded, opening up around one hundred new BT Phone Shops having become separated from the GPO through the British Telecommunications Act 1981 which also created the BABT. In 1982 there was a step-change in types of BT phones entering the market, and technology used for connecting phones, and the BABT was needed with a greater variety of phones than was previously available: BT was about to lose its monopoly on supplying phones.


Mechanism of approval

From July 1982, manufacturers could submit phones to be approved by BABT for a cost of £1,700, and would either carry the green circular label if approved, or a red triangular label if not (right). The main four British suppliers of telephones were very wary about supplying to non-BT independent retailers. At the same time BT was introducing its so-called IXT phones (IneXpensive Telephone), designed for the new plug-and-socket connections - another innovation.
Philips Koninklijke Philips N.V. (), commonly shortened to Philips, is a Dutch multinational conglomerate corporation that was founded in Eindhoven in 1891. Since 1997, it has been mostly headquartered in Amsterdam, though the Benelux headquarters i ...
TMC (formerly the Telephone Manufacturing Company) also made the new (more electronic) IXT phones.History of TMC
/ref> The
British telephone sockets British telephone sockets were introduced in their current plug and socket form on 19 November 1981 by British Telecom to allow subscribers to connect their own telephones. The connectors are specified in British Standard BS 6312. Electrical chara ...
were introduced on 19 November 1981. On 19 July 1982, the government announced its desire to privatise BT, which happened in late 1984. By 1982, 15 million British homes had a phone, with 5 out of 6 only having one phone. Adding an extra phone without the new sockets was heavy work. In the 1980s, it shared offices with the BEAB in
Hersham Hersham is a village in Surrey, within the M25. Its housing is relatively low-rise and diverse and it has four technology/trading estates. The only contiguous settlement is Walton-on-Thames, its post town. Hersham is served by Hersham and Wal ...
, Surrey. The Telecommunications Act 1984 detailed standards for
modem A modulator-demodulator or modem is a computer hardware device that converts data from a digital format into a format suitable for an analog transmission medium such as telephone or radio. A modem transmits data by Modulation#Digital modulati ...
s, which had to conform to BABT standards. Since its incarnation, BABT has established itself as a Notified Body in Europe and has a number of appointments such as the
IMEI The International Mobile Equipment Identity (IMEI) is a numeric identifier, usually unique, for 3GPP and iDEN mobile phones, as well as some satellite phones. It is usually found printed inside the battery compartment of the phone but can al ...
allocation authority for GSM terminals under appointment from the
GSM Association The GSM Association (commonly referred to as 'the GSMA' or ''Global System for Mobile Communications'', originally ''Groupe Spécial Mobile'') is an industry organisation that represents the interests of mobile network operators worldwide. More ...
. In May 1992 it gave its first GSM approval to Orbitel.


Structure

BABT is wholly owned b
TÜV SÜD Product Service
Germany's leading testing and certification body.


Function

BABT is a
Notified Body A notified body, in the European Union, is an organisation that has been designated by a member state to assess the conformity of certain products, before being placed on the EU market, with the applicable essential technical requirements. These e ...
for the following European Directives: 98/13/EC TTE & SESE Directive (now superseded by the R&TTE Directive); 89/336/EEC EMC Directive; 73/23/EEC Low Voltage Directive; 1999/5/EC R&TTE Directive. BABT is a Competent Body for the following Directives: 89/336/EEC EMC Directive


See also

*
Telecommunications Industry Association The Telecommunications Industry Association (TIA) is accredited by the American National Standards Institute (ANSI) to develop voluntary, consensus-based industry standards for a wide variety of Information and Communication Technologies ( ICT) ...
* Type Allocation Code (TAC) for IMEI


References


External links


Main website

Parent company website

IMEI Number Application
Manufacturers of GSM terminals may obtain
IMEI The International Mobile Equipment Identity (IMEI) is a numeric identifier, usually unique, for 3GPP and iDEN mobile phones, as well as some satellite phones. It is usually found printed inside the battery compartment of the phone but can al ...
allocations through BABT.
RTTE Directive
Manufacturers of radio equipment and telecommunications terminal equipment can obtain European regulatory approval through BABT.
History of British telephones
{{authority control 1982 establishments in the United Kingdom Organizations established in 1982 Organisations based in Surrey Product-testing organizations Telecommunications organisations in the United Kingdom