Bar chimes
   HOME

TheInfoList



OR:

A mark tree (also known as a nail tree, chime tree, or set of bar chimes) is a
percussion instrument A percussion instrument is a musical instrument that is sounded by being struck or scraped by a beater including attached or enclosed beaters or rattles struck, scraped or rubbed by hand or struck against another similar instrument. Ex ...
used primarily for musical colour. It consists of many small chimes—typically cylinders of solid aluminium or hollow brass tubing 3/8" in diameter—of varying lengths, hung from a bar. They are played by sweeping a finger or stick through the length of the hanging chimes. They are mounted in pitch order to produce rising or falling glissandos. Unlike
tubular bell Tubular bells (also known as chimes) are musical instruments in the percussion family. Their sound resembles that of church bells, carillon, or a bell tower; the original tubular bells were made to duplicate the sound of church bells within a ...
s, another form of chime, the chimes on a mark tree do not produce definite pitches, as they produce
inharmonic In music, inharmonicity is the degree to which the frequencies of overtones (also known as partials or partial tones) depart from whole multiples of the fundamental frequency ( harmonic series). Acoustically, a note perceived to have a singl ...
(rather than harmonic) spectra. The mark tree is named after its inventor, studio percussionist Mark Stevens, who devised it in 1967. When he could not come up with a name, percussionist
Emil Richards Emil Richards (born Emilio Joseph Radocchia; September 2, 1932 – December 13, 2019) was an American vibraphonist and percussionist. Biography Musician Richards began playing the xylophone aged six. In High School, he performed with the Hartf ...
dubbed the instrument the "mark tree". The mark tree should not be confused with two similar instruments: *
Wind chimes Wind chimes are a type of percussion instrument constructed from suspended tubes, rods, bells or other objects that are often made of metal or wood. The tubes or rods are suspended along with some type of weight or surface which the tubes or rods ...
are mounted in a circle with a hanging striker strung in the center; they may be solid or hollow and made of many types of material, whereas the mark tree is mounted in a linear fashion and normally has solid metal bars. * The
bell tree A bell tree, also known as tree bellsBeck, John. ''Encyclopedia of Percussion.'' Taylor and Francis, 1995. or Chinese bell tree (often confused with the mark tree), is a percussion instrument, consisting of vertically nested inverted metal bowl ...
is a set of graduated cup-shaped
bell A bell is a directly struck idiophone percussion instrument. Most bells have the shape of a hollow cup that when struck vibrates in a single strong strike tone, with its sides forming an efficient resonator. The strike may be made by an inte ...
s mounted vertically along a center post.


See also

* Chime (disambiguation) * Chime bar * Glockenspiel *
Tubular bell Tubular bells (also known as chimes) are musical instruments in the percussion family. Their sound resembles that of church bells, carillon, or a bell tower; the original tubular bells were made to duplicate the sound of church bells within a ...
*
Wind chime Wind chimes are a type of percussion instrument constructed from suspended tubes, rods, bells or other objects that are often made of metal or wood. The tubes or rods are suspended along with some type of weight or surface which the tubes or rod ...


References

* {{Authority control Musical instruments played with drum sticks Percussion idiophones 20th-century percussion instruments Unpitched percussion instruments Drum kit components