Bantam GP

The Willys MB and the Ford GPW, both formally called the U.S. Army Truck, -ton, 4×4, Command Reconnaissance, commonly known as the Willys Jeep, Jeep, or jeep, and sometimes referred to by its supply catalogue designation G503,According to its United States Army Ordnance Corps Supply Catalog designation, 'G-number', or SNL nr. — a group number for ordering parts, based on a Standard Nomenclature List. were highly successful American off-road capable light military utility vehicles, built in large numbers to a single standardized design, for the United States and the Allied forces in World War II from 1941 until 1945.

The jeep became the primary light-wheeled multi-role vehicle of the United States military and its allies, with President Eisenhower once calling it "one of three decisive weapons the U.S. had during WWII." It was the world's first mass-produced light four-wheel drive car. With almost 650,000 units built, the jeep constituted a quarter of the total U.S. non-combat motor vehicles produced during the war, or almost two-thirds of the 988,000 light 4WD vehicles produced, when counted together with the Dodge WC series. Large numbers of jeeps were provided to U.S. allies, including the Soviet Union at the time. Aside from large amounts of 1- and 2ton trucks, and 25,000 ton Dodges – some 50,000 ton jeeps were shipped to help Russia during WWII – against Nazi-Germany's ''total'' production of just over 50,000 Kübelwagens, the jeep's primary counterpart.

Historian Charles K. Hyde wrote: "In many respects, the jeep became ''the'' iconic vehicle of World War II, with an almost mythological reputation of toughness, durability, and versatility." Not only did it become the workhorse of the American military, as it replaced the use of horses and other draft animals (still heavily used in World War I) in every role, from cavalry units to supply trains, but improvised field modifications also made the jeep capable of just about any other function G.I.s could think of. Moreover: military jeeps were adopted by countries all over the world, to this day – so much that they have become the most widely used and recognizable military vehicle in history.

Dwight D. Eisenhower, who was Supreme Commander of the Allied Expeditionary Force in Europe in World War II, wrote in his memoirs that most senior officers regarded it as one of the five pieces of equipment most vital to success in Africa and Europe. General George Marshall, Chief of Staff of the US Army during the war, called the vehicle "America's greatest contribution to modern warfare." In 1991, the MB Jeep was designated an "International Historic Mechanical Engineering Landmark" by the American Society of Mechanical Engineers.

After WWII, the original jeep continued to serve, in the Korean War and other conflicts, until it was updated in the form of the M38 Willys MC and M38A1 Willys MD (in 1949 and 1952 respectively), and received a complete redesign by Ford in the form of the 1960-introduced M151 jeep. Its influence, however, was much greater than that — manufacturers around the world began building jeeps and similar designs, either under license or not — at first primarily for military purposes, but later also for the civilian market. Willys turned the MB into the civilian Jeep in 1945, making the world's first mass-produced civilian four-wheel drive. The "Jeep" name was trademarked, and grew into a successful, and highly valued brand.

The success of the jeep inspired both an entire category of recreational 4WDs and SUVs, making "four-wheel drive" a household term, and numerous incarnations of military light utility vehicles. In 2010, the American Enterprise Institute called the jeep "one of the most influential designs in automotive history". Its "sardine tin on wheels" silhouette and slotted grille are perhaps even more instantly recognizable than the VW Beetle, and it has evolved into the currently produced Jeep Wrangler still largely designed like the original jeep design.

History

The design challenge and achievement

The idea of the jeep originated with the infantry, which needed a low-profile, powerful vehicle with four-wheel drive and it was turned over to commercial companies (chiefly Bantam, Willys, and Ford) to deliver – the development repeatedly being described as a " design by committee".Ackerson (2006
pages=7–8
"...several military officers who regarded the Jeep as "a universal idea, which no one person invented, created or discovered ... an evolution not an invention ... the fruit of specifications defined by the military over a long period." In fall 1941, Lt. E.P. Hogan of the U.S. Army Quartermaster Corps wrote: "Credit for the original design of the Army's truck -ton, 4x4, may not be claimed by any single individual or manufacturer. This vehicle is the result of much research and many tests." Hogan credited both military and civilian engineers, especially those working at the Holabird Quartermaster Depot. Nevertheless, in a case of the U.S. Federal Trade Commission (FTC), charging Willys-Overland with misrepresentation in their advertising and news claims, ruled that, according to the ''New York Times'', Willys did ''not'' perform the "spectacular achievement"(Willys advertising wording) of creating, designing and perfecting the "jeep" together with U.S. Army Quartermaster officers, but that: ''"The idea of creating a "jeep" was said by the FTC .. to have been originated by the American Bantam o.of Butler, PA " ith U.S. Army officers and to have been onceived anddeveloped by that company."''

Officially, on 7 April 1942, U.S. patent 2278450 for the WW II jeep, titled "Military vehicle body" was awarded to the U.S. Army, which had applied for it, listing Colonel Byron Q. Jones as the inventor on the patent, though he had performed no work on the design of the vehicle. Filed on 8 October 1941, stating in the application that "The invention described herein, if patented, may be manufactured and used by or for the Government for governmental purposes without the payment of any royalty thereon", the patent relates to a "small car vehicle body having convertible features whereby it is rendered particularly desirable for military purposes" and describes the purpose as being "a convertible small car body so arranged that a single vehicle may be interchangeably used as a cargo truck, personnel carrier, emergency ambulance, field beds, radio car, trench mortar unit, mobile anti-aircraft machine gun unit, or for other purposes."

First motorizations and World War I

For centuries, horses were used for reconnaissance, communications, and pulling loads, whenever wars were fought, but after the start of the 20th century, motorcycles were the first motor vehicles eagerly adopted by the military, either to replace mounted/ridden cavalry horses, or to motorize infantry.

The armies of World War I relied on marching men, horses, and railways for movement but its new technologies introduced motor vehicles: the first tanks, armoured car, and artillery tractors. Motorcycles were the most prolific motor-tools in the Allied arsenal.

Cavalry, mounted infantry, scouts and messengers could now be mobilized in combat with much greater speed, agility, and near tireless machines, exactly what was wanted for relaying critical orders, getting munitions to machine guns, and scouting miles ahead of advancing units. The quick and nimble motorcycle, ''"''ridden hard through shot and shell to secure victory", has made itself irreplaceable in specific roles on the battlefield to this day.

But motorcycles also had serious limitations. One could be fast on a decent road, but many roads were still so bad, that the U.S. already had a ''Good Roads Movement'' in the late 19th century, as increased usage of bicycles required improving the surfaces of existing wagon and carriage trails. The motorcycles of the era were not ideal; only the best motorcyclists could endure a muddy battlefield trail, control the bike and keep it from stalling, damage, or flipping over; and driver training was both costly in terms of time and money. They had poor off-roading ability and lacked payload capacity. Adding a sidecar provided more stability, but payload and cargo space remained very limited, and having only one powered wheel out of three, still meant the combination got stuck a lot. Both British and American 3x2 WW I motorized tricycles, with two driven rear wheels were devised Royal Page Davidson used patents of Charles Duryea to modify chassis, with machine-guns and armor shield, from 1898.Davidson was the leading pioneer of armored military vehicles in the U.S. of his time.

At the same time, the arrival and growing use of automobiles led to various individuals pioneering cross-USA vehicle trips, followed by the first transcontinental trips by convoys of vehicles. After the U.S. Army purchased its first truck in 1907, of 5-ton payload capacity, in the late summer of 1913, the Army Medical and Quartermaster Corps (QC) took a 3/4-ton QC field-truck, on a multi-leg experimental trek through Alaska for the state's Road Commission – both to try the truck's bad-road supply and maintenance abilities as well as test the state of several important overland connections in the rough territory. In 1915 followed the first successful transcontinental motor convoy, traveling the entire Lincoln Highway, from New York City to the Panama-Pacific World Exhibition in San Francisco, taking four months – for making a film about it.
Starting 1916, the Quartermaster Corps was servicing over 100 'motor trucks', of as many as 27 'varieties'; and in March that year, the U.S. Army decided to form its first two motor companies, to be used immediately in the Pancho Villa Expedition in Mexico, starting 14 March 1916. One company got 27 four-wheel drive, 2ton, Jeffery off-road Quad trucks. The other got 27 heavy-duty, 1ton, long wheelbase, rear-wheel drive White trucks. The U.S. War Department procured the vehicles as rolling chassis, which the manufacturers had to expedite to El Paso, Texas. The wagon bodies for the chassis came from the Quartermaster Depot. The most suitable truck capacity found by the Quartermaster General for Army use to be 1ton, matching both the country roads nature, the strength of bridges, as well as the existing troop supply system, at the time also using standard 1ton, four-mule wagons.

Meanwhile, World War I had been raging in Europe since 1914. More than five years before, Henry Ford had launched his Model T. ".. its speed, durability, stamina, and ease of maintenance (compared to a horse) had already won over many civilians,"Six WWI Vehicles That Helped Create Our Modern Mechanical World – Haynes Manuals
/ref> and British and French forces also wanted them. Ford, an isolationist, would not sign a contract with an overseas government, but local dealers sold over 50,000 Fords to European forces, who militarized them locally, most famously into ambulances. When the U.S. entered the war in 1917, Ford sold directly to his country, delivering another 15,000 cars before peace was signed.

Britain, France, and Russia were already buying American-made four-wheel drive trucks from the Four Wheel Drive Auto Company, and Jeffery / Nash Quads, because on the muddy roads and European battlefields, they wouldn't get stuck all the time.

The United States procured thousands of motor vehicles for its military, including some 12,800 Dodges, plus thousands of four-wheel drive trucks: 1ton Nash Quads, and 3 and 5ton FWD trucks. General John J. Pershing viewed horses and mules as acceptable for the previous three U.S. wars, but in the new century, his cavalry forces had to move quicker, with more range and more personnel. He was the first to deploy motorcycles, in the Mexican Border War, predominantly a cavalry campaign over wide regions of the Southwest, where Harley-Davidson motorcycles provided to the Army gave the U.S. the advantage over the horse-mounted Mexicans. The U.S. Army was so pleased with further innovations, like a sidecar as a platform to mount machine-guns, that the U.S. procured many more motorcycles than 4WD trucks for World War I. "Entire infantry units were mobilized on motorcycles, and they also provided an ideal way to rapidly deploy machine gun crews into position. Medical units used them to evacuate wounded on stretcher-equipped sidecars, and to return medical supplies and ammunition"

"By the end of the war, the whole world saw the horse as hopelessly outclassed." Nevertheless – crucially – using four-wheel drive still remained tied to heavier trucks, of to . All through World War I — there weren't any light four-wheel drive vehicles yet. PBS, 2007: ''Jeep: Steel Soldier.'' Time = 2:40–3:00

Interbellum tests, and formulating the need for a standardized, 4x4, quarter-ton

Immediately after World War I, the future use of motor vehicles was considered. In 1919, the U.S. Army Quartermaster Corps recommended the acquisition of a new kind of military vehicle, "..of light weight and compact size, with a low silhouette and high ground clearance, and possess the ability to carry weapons and men over all sorts of rough terrain." The U.S. Army started looking for a small vehicle suited for reconnaissance and messaging, while at the same time searching for a light cross-country weapons carrier.
However, after World War I, U.S. military budgets were drastically cut, and so any development of a light 4WD car was curtailed until the late 1930s.

At the same time, there was a drive for standardization. By the end of World War I, U.S. forces overseas had a total of 216 different makes and models of motor vehicles to operate, both foreign and domestic, and no good supply system to keep them running.

Various light motor vehicles were tested — at first motorcycles with and without sidecars, and some modified Ford Model Ts. But what was needed was a very light, small, battlefield utility vehicle to replace motorcycles (with or without sidecar) — more user-friendly to control, but just as easy to get in and out of. In the early 1930s, the U.S. Army experimented with a bantam weight "midget truck" for scouts and raiders. A , low-slung mini-car with a pick-up body, provided by American Austin Car Company, was shown in a 1933 article in ''Popular Mechanics'' magazine. One of the pictures showed that the vehicle was light enough to be man-handled — four soldiers could lift it from the ground entirely. But it was still only rear-wheel drive.

After 1935, when the U.S. Congress declared World War I vehicles obsolete, procurement for "remotorization of the Army" gained more traction, but pre-war, peacetime budget restrictions meant that the U.S. Comptroller General imposed open bidding on every additional/incremental procurement. Each time, the Army was forced to award the contract to the lowest bid that met requirements
or specifications, often different makers – however, saving a small percentage initially, on the procurement, overall proved "penny wise, pound foolish" because it led to problematic diversity of the fleet, requiring too much training of operators and mechanics for maintenance and repairs, and too many non-interchangeable spare parts – bad for war logistics, and preventing the repair of one vehicle by scavenging parts off another. And the Army could still only get multi-axle drive on trucks, "requiring the greatest battlefield mobility".

Meanwhile, in Asia and the Pacific, Japan had invaded Manchuria in 1931, and was at war with China from 1937. Its Imperial Army used a small, three-man crew, four-wheel drive car for reconnaissance and troop movements, the Kurogane Type 95, produced in limited numbers from 1936.

In 1937 Marmon-Herrington presented five 4x4 Fords, and American Bantam (previously American Austin) once again contributed — delivering three Austin derived roadsters in 1938. The U.S. Army itself had also built an experimental light, low-profile scout and gun mover, the Howie-Wiley Machine Gun Carrier, ordered by General Walter Short, then Assistant Commander of the Army's Infantry School at Fort Benning, Georgia, and built by Captain Robert G. Howie and Master Sergeant Melvin C. Wiley. Completed in April 1937, with a driver and a gunner laying prone, operating a .30 caliber machine gun, the vehicle was nicknamed the "belly flopper".

By 1939 the U.S. Army began standardizing its general-purpose truck chassis types by payload rating, initially in five classes from . The Quartermaster Corps saw that the Army needed truck chassis to be standardized in crucial basic functional 'types' (body models), and within 'payload capacity' classes. Additionally, some crucial features could not be equipped by the QC to commercial trucks after procurement. Cross-country capabilities, like increased ground clearance and multi-axle drive, had to be designed and built into the trucks from the factory. The Quartermaster Corps Technical Committee concurred, and in June 1939 requested the Chief of Staff's approval, to start standardizing truck chassis and bodies procured for the Army into five payload classes: ton, 1ton, 2ton, 4ton, and 7-ton and all tactical trucks had to have (part-time) all-wheel drive capability. Furthermore, to achieve the needed level of standardization, the Quartermaster General urged trucks should be bought en masse from there on. Acting Chief of Staff, George C. Marshall, approved the procurement policy in the summer of 1939. The Quartermaster Corps also wanted to require the truck industry to use dimensionally interchangeable components, but further standardization measures were not approved until 1940.

However, in 1940 the categories were revised. For the first time, a quarter-ton truck chassis class was introduced, at the bottom of the range, and the -ton category was supplanted by a -ton chassis.

By the eve of entering World War II, the United States Department of War had determined it needed a -ton, cross-country reconnaissance vehicle. Although -ton four-by-fours had outperformed -ton 4x4 trucks during testing in 1938, the half-ton 4x4 trucks – both from Marmon-Herrington Ford, and the 1940 Dodge VC series – still proved too large and heavy, and insufficiently agile off-road. Anxious to have a quarter-ton truck in time for America's entry into World War II, the U.S. Army solicited proposals from domestic automobile manufacturers. Recognizing the need to create standard specifications, the Army formalized its requirements on 11 July 1940, and submitted them to 135 U.S. automotive manufacturers.

Development start – Bantam Reconnaissance Car

In the early 1930s, the Infantry Board at Fort Benning had become interested in the British Army's use of the tiny Austin 7 car in a reconnaissance role, and in 1933 obtained a car from the American Austin Car Company in Pennsylvania which built them under license. Meanwhile, American Austin had gone bankrupt and its assets were purchased by a new company which became American Bantam. In 1938, American Bantam loaned three much-improved cars to the Pennsylvania National Guard for trials during summer maneuvers, which were received as reliable, economical and practical. American Bantam officials met with chiefs of Infantry and Cavalry and suggested a contract to further develop a military version of their car. But a ''sub''committee of army officers and civilian engineers was tasked to determine exact specifications for the proposed vehicles, including the now ''major'' Robert Howie. One of their first actions was to visit the American Bantam factory, to evaluate their compact cars and production facilities. Once there, Howie stayed several days, and by the end of June 1940, with American Bantam's consultation, the initial specifications were drawn up. They specified a part-time 4-wheel drive vehicle, with a 2-speed transfer case, three bucket seats, and a folding windshield, of just , with a payload up to , on a wheelbase no more than (the wheelbase of the American Bantam pickup truck), a maximum (collapsible) height of (three inches above the Howie-Wiley machine-gun carrier), and a speed range of . Its body design was to be rectangular, including a sketch drawing, handed to the Ordnance Technical Committee.

By now the war was underway in Europe, so the Army's need was urgent and demanding. Bids were to be received by 22 July, a span of just eleven days. Manufacturers were given 49 days to submit their first prototype and 75 days for completion of 70 test vehicles. The Army's Ordnance Technical Committee specifications were equally stringent: the vehicle would be four-wheel drive, have a crew of three on a wheelbase of no more than , later upped to , and track no more than . The height with the windshield folded down was also upped, to . The diminutive dimensions were similar in size and weight to the American Bantam's compact truck and roadster models. It was now to carry a payload, and be powered by an engine capable of of torque. The most daunting demand, however, was an empty weight of no more than .Sources differ on this.

Initially, only American Bantam Car Company and Willys-Overland entered the competition. Ford joined later. Although Willys was the low bidder, Willys was penalized for requesting more time, and American Bantam received the contract, as the only company committing to deliver a pilot model in 49 days and production examples .

American Bantam's chief engineer, Harold Crist, who had previously worked on the first Duesenberg, and been an engineer at Stutz Motor Company of Indianapolis for 18 years, drafted freelance Detroit designer Karl Probst to collaborate. Probst turned down American Bantam initially, but agreed to work without pay after an Army request and began work on 17 July 1940.

Karl Probst laid out full design drawings for the American Bantam prototype, known as the Bantam Reconnaissance Car, or BRC Pilot, in just two days, and worked up a cost estimate the next day. American Bantam's bid was submitted, complete with blueprints, on 22 July. American Bantam had purchased the assets of American Austin Car Company from the bankruptcy court and had developed their own line of small cars and engine technology, free of licenses from the British Austin Motor Company. As the only small car manufacturer in the United States at the time, their design was able to leverage commercial off-the-shelf components as much as possible. American Bantam adapted front sheetmetal body-stampings from its car line: the cowl, dashboard, and curvy front fenders. As the American Bantam engines only made 22 hp, a Hercules engine was rejected in favor of a Continental four-cylinder, making 45 horsepower and of torque, mated to a Warner Gear transmission. Custom four-wheel drive-train components included the Spicer transfer case to send power to front and back axles, plus the axles were Spicer units for the Studebaker Champion, modified for four-wheel drive use.

Using off-the-shelf automotive parts where possible had partly enabled drawing up the blueprints quickly. By working backward, Probst and American Bantam's draftsmen converted what Crist and a few others had put together into drawings. The hand-built prototype was then completed in Butler, Pennsylvania, and driven to the Army vehicle test center at Camp Holabird, Maryland. It was delivered on 23 September 1940. The vehicle met all the Army's criteria except vehicle weight and engine torque. The American Bantam Pilot, initially called the "Blitz Buggy", and later also dubbed "Old Number One") presented Army officials with the first of what eventually evolved into the World War II U.S. military jeep.

Enter Willys and Ford – early production jeeps

As American Bantam did not have the production capacity or financial resources to deliver on the scale needed by the War Department, the other two bidders, Ford and Willys, were encouraged to complete their own pilot models for testing. The contract for the new reconnaissance car was to be determined by trials. While American Bantam's prototype underwent testing at Camp Holabird from 27 September to 16 October, Ford and Willys technical representatives were invited and given ample opportunity to observe the vehicle and study its performance. To expedite Ford and Willys' production, the War Department forwarded the American Bantam blueprints to them, claiming the government owned all designs in the proposals submitted to it in the bidding contest. American Bantam chose not to dispute this.

By November 1940, Ford and Willys each submitted prototypes to compete with the American Bantam in the Army's trials while American Bantam had already kicked off mass production of their second generation Mark II, also known as the . The Willys "Quad" and the Ford "Pygmy" prototype models were similar to the American Bantam Pilot, and were joined in testing by American Bantam's BRC-60. By then the U.S. armed forces were in such haste, and allies like Britain, France, and USSR were trying to acquire these new "Blitz-Buggies",Contemporaneous nickname in 1940/1941 British Empire and Canada. that all three cars were declared acceptable and orders for 1,500 units per company were given for field testing and export. At this time it was acknowledged the original weight limit (which even the American Bantam BRC-60 could not meet) was unrealistic, and it was raised to . On 22 January 1941, the Quartermaster Corps Technical Committee advised standardization of the jeeps across all manufacturers.

For early production runs, each vehicle received revisions and a new name. American Bantam's became the Production began on 31 March 1941, with a total of 2,605 built up to 6 December — the number ordered was raised because Britain and the USSR already wanted more of them supplied under Lend-Lease.

The American Bantam BRC-40 was the lightest and most nimble of the three early production models, and the Army lauded its good suspension, brakes, and high fuel economy. However, as the company could not meet the Army's demand for 75 vehicles a day, production contracts were also awarded to Willys and Ford.

Ford's early production jeep went into production as the "GP", with "G" indicating a "Government" contract, and "P" chosen by Ford to designate a car with a wheelbase of .Ford's GP designation did not represent "general purpose" – that was a government description. The Ford GP was not only the most numerous (about 4,458) early production jeeps — it was also the first jeep fielded in some numbers to U.S. Army units. Ford's overall design and quality of construction had advantages over the American Bantam and Willys models, but the GP's engine, an adaptation of their Model N tractor engine, was underpowered and not sufficiently reliable. Ford built fifty units with four-wheel steering, of which four have survived.

Willys-Overland was the last of the three manufacturers to start early production, waiting until 5 June 1941 to kick-off production, reducing the Quad's weight by . After many painstaking detail changes, Willys renamed their vehicle "MA", for "Military" model "A". Only 1,555 MAs were built, most of which went to the Soviet Union under Lend-Lease. Only 27 units are still known to exist.

Eventually, virtually all of the Willys-Overland and most of the American Bantam and Ford GP early production jeeps were provided to Britain and USSR, leaving a few hundred American Bantam BRCs and under 1,000 GPs for the home troops.

Full production – Willys MB and Ford GPW

By July 1941, the War Department desired to standardize and decided to select a single manufacturer to supply them with the next order for 16,000 vehicles. Willys won the contract mostly due to its much more powerful 60 hp engine (the L134 "Go Devil"), which soldiers raved about, and its lower cost and silhouette. The design features in the Bantam and Ford entries which represented an improvement over Willys's design were incorporated into the Willys, moving it from an "MA" designation to "MB". Most obvious is the front design from the Ford GP, with a wide, flat hood, and the headlights moved inward from the fenders to under the hood, protected by a single wide, straight front grille and a brush guard.

The jeep, once it entered mass production, introduced several new automotive technologies. Having four-wheel drive for the first time introduced the need for a transfer case, and the use of constant-velocity joints on the driven front wheels and axle, to a regular production car-sized vehicle.

In early October 1941, it became clear that Willys-Overland could not keep up with procurement needs, and Ford received government contracts to build 30,000 units, according to Willys' blueprints, drawings, specifications, and patents, including the more powerful Willys engine. When Ford offered to increase the displacement and power of the tractor engine in their GP model, the government declined and insisted that Ford produce jeeps identical to the Willys, both for the much stronger engine, and for complete commonality/interchangeability of the components. Willys received no license fees, and Ford complied. The Ford was designated "GPW", with the "W" indicating the "Willys" licensed design and engine. Ford retooled at a cost of $4 million to build Willys engines, and produced the first GPW as quickly as 2 January 1942. Just days before, in late December 1941, the Quartermaster Corps had ordered another 63,146 GPWs.

One extra condition to Ford's jeep orders was to manufacture them in several different Ford assembly plants, in addition to Ford's primary 'River Rouge' plant in Dearborn (Michigan). The QC expressly demanded Ford decentralize their jeep manufacturing to facilitate the Army's logistics, shipping from all three coasts. Besides Dearborn, Ford also assembled jeeps in their Louisville, Chester (Pennsylvania), Dallas (Texas), and Richmond (California) plants. Ford's Edgewater (New Jersey) plant also built jeeps in the first four months of 1943.

During World War II, Willys produced 363,000 Jeeps and Ford some 280,000. Some 50,000 were exported to the USSR under the Lend-Lease program. Ford's assembly across plants distributed as: River Rouge 21,559; Dallas and Louisville almost tied at 93,748 and 93,364 units respectively; Chester 18,533, and Edgewater just 1,333 units. Bantam stopped further jeep production and made two-wheel jeep trailers. This was sufficient to keep the firm going until it was taken over in 1956.

Ford built jeeps with functionally interchangeable parts and components, in part facilitated by using components from common sources: frames from Midland Steel, wheels from Kelsey-Hayes, and axles and transfer cases from Spicer. However, Ford had replaced the welded grate front grille by a single pressed/stamped sheet steel part, with nine vertical open slots to ventilate the radiator, and circular openings in front of the lights, to simplify production, and save costs. Willys also adopted this in their production of the MB after unit 25,808. Predictably, there were still many minor differences; the Ford chassis had an inverted U-shaped front cross member instead of a tubular bar, and a Ford script letter "F" was stamped onto many small parts.

Many body detail differences remained for as long as January 1944, when a composite body, fabricated by American Central, was finally agreed upon by both Ford and Willys. American Central had been making the jeep's bodies from the first 1500 units order for the Willys MA, and had also built Ford's jeep bodies for two years already, but until January 1944, Ford and Willys contracts retained detail differences. However, from then on features of both designs were integrated. Through the chaotic circumstances of war, sometimes peculiar deviations from regular mass-production came off the assembly line, that are now prized by collectors. For instance: the earliest Ford GPWs had a Willys design frame, and in late-1943, some GPWs came with an unmodified Willys body; and in 1945 Willys produced some MBs with a deep mud exhaust system, vacuum windshield wipers, and a Jeep CJstyle parking brake.

The Ford GPA, the amphibious jeep

Approximately 13,000 additional amphibious jeeps were built by Ford as the Ford GPA (nicknamed "Seep" for "Sea Jeep"). Inspired by the larger DUKW, the vehicle was produced too quickly and proved to be too heavy, too unwieldy, and with insufficient freeboard. In spite of participating with some success in the Sicily landings in July 1943, many were passed on under the Lend-Lease program; some 3,500 to the USSR alone. The Soviets were sufficiently pleased with its ability to cross the many rivers and swamps in their territories, to develop their own version of it after the war, the GAZ-46.

Accessories and equipment fittings

Unlike the various Dodge WC series models of larger, light 4x4 trucks, the Willys and Ford jeeps were all the same from the factory, and specialization happened only through standardized accessories, field kits, and local / in field modifications. Frequently made additions to the standard jeeps were to fit weaponry, communications equipment, Litter carriers, wire cutters, or rudimentary armor.

Jeep trailer

Some 150,000 -ton trailers were made by over ten different companies, specifically built to be towed by the jeep – most of them by Bantam and Willys. These doubled the jeeps' nominal payload. Their designs were hardly changed after the war, and versions of them remained in use for ton jeeps, into the 1990s.

Radio gear

The jeep's primary command and reconnaissance roles of course necessitated fitting many kinds of tactical communication equipment. The first standard production fitting was for the SCR-193 radio, placed on either side in the rear of a jeep, on top of the rear wheel well. For proper reception, this included radio interference suppression shielding, so indicated by a suffix 'S' on the jeep's hood registration number. In 1943/1944, the Army shifted to FM radios, and new fittings were developed for those. At least fourteen Signal Corps Radio set fittings were standardized, including for the SCR-187, SCR-284, SCR-499, SCR-506, SCR-508, SCR-510, SCR-522, SCR-528, SCR-542, SCR-608, SCR-610, SCR-619, SCR-628, SCR-694, SCR-808, SCR-828, and VRC-l.

Gun mounts

Two of the original uses of the -ton truck were reconnaissance and the support of infantry with machine guns. These roles led to the desire to mount automatic rifles, to be fired from the jeep. To mount either a .30-caliber M1919 Browning machine gun or .50-cal (12.7 mm) M2 Browning heavy machine gun, the M31 pedestal, a tubular pedestal with bracing in three directions, was developed. This was the most common factory jeep machine-gun mount during the war, with 31,653 produced. It was followed by the improved M31C in March 1945, but this came too late for much combat in World WarII. Besides these, units often created their own pedestal mounts in the field or adapted other pedestal mounts as available. Additionally, in 1943 the M48 bracket mount was standardized, to attach the .30-cal. machine gun or .30-cal. M1918 Browning Automatic Rifle in front of the passenger seat. Like with the pedestals, troops improvised many gun-holding brackets in the field. Troops frequently preferred a .30 cal machine gun on a pivot, to fire from the front passenger seat.

Aside from actual fielding intentions, the jeep was widely used for various weapons mounts trials during World WarII, simply because the jeep was a handy platform to test all kinds of ring mounts, multiple gun mounts, as well as different weapons. The widespread adoption of the jeep in other armies also meant many different armaments. The most rigorous efforts were by the British. Perhaps the most well-known are the jeeps modified by the SAS for the 1942 desert raids in Egypt. These had several armaments, commonly using twin 0.303-inch Vickers K machine guns on the passenger side. These also served as a pattern for the later British airborne jeeps, armed with single Vickers K guns.

Field kits

Many field kits originated as locally made modifications and additions, for which standard kits were later produced by both the U.S. and Britain. Frequently used examples were rear baggage racks, ambulance litters and frames to transport lying wounded on jeeps, and wire cutters. Soldiers frequently ran into (literally) wires — either inadvertently, inconveniently strung communication wires, or deliberately placed by the enemy, to injure or kill motorcycle and vehicle personnel. The typical countermeasure was to mount a tall vertical steel bar to the front bumper, that would either cut offending strings or deflect them over the heads of the jeep crew. This was first used in Tunisia, 1943, but became frequent in Italy (1943–1945), and especially necessary in France (1944).

More specific kits were created to enhance off-roading and mechanical capabilities, dealing with extreme climates, and technical support applications, like laying communication cables, or a field arc welder kit.

Many solutions made the jeep run on rails, popular in the Pacific theater with U.S., Britain, and Commonwealth troops, especially in Burma. A-frames on the front bumper enabled two jeeps to tow heavy trailers (for 2ton trucks) in tandem. For desert cooling, radiator surge tanks were used in North Africa in 1942. Equally, there were winterization kits, even snowplows, and the jeep's go-anywhere capability was further aided with deep water fording kits, tire air compressors, and a winch option. For communications, jeeps were modified with rear ditch plows and cable laying reels, such as the RL-31 reel unit.

Off-road enhancements

To disembark jeeps in amphibious landings, in 1943 a deep water fording kit for the jeep was produced. This enabled jeeps to be driven off landing craft like the Landing Craft Mechanized (LCM), wading into relatively deep water, without flooding the engine or short-circuiting the electrical system. After several interim kits were issued, the U.S. Army standardized the universal WV-6 kit (later G9-5700769) which served all WWII ton to 2ton trucks. The kit contained flexible hoses for both the exhaust and the air intake, as well as proper waterproofing equipment. Westinghouse developed a T1 air compressor, to be used in conjunction with special tires, to deflate the tires off-road, in soft mud or snow, and be able to pressurize them again after. It could be fitted under a maintenance work order, from October 1944. There was even a small capstan winch field kit made for the jeep, driven off the motor, for self-extracting, or pulling other jeeps trapped in mud or snow. The winch was very small and made hand-cranking of the jeep impossible. The latter two features remained rare.

Arctic weather measures

Willys developed a winterization kit for very cold climates. This included a cold-starting stove, crankcase ventilator, primer, hood insulation blanket, radiator blanket, a body enclosure kit, defroster/de-icer, and snow chains. These kits were however frequently unavailable, so units took their own measures in the field, particularly improvising various body enclosures, to protect the crew from extreme weather. In addition, two companies fabricated snow-plows for the jeep. Geldhill Road Machinery Company made the 7T1NE plow, an angled single blade, while the JV5.5E was a V-shape design. The Wausau Iron Works built two similar designs, designated as the J and JB snowplows. Neither of these seem to have been commonly issued in combat. Photos of snowplows in use in the European theater mostly show improvised plows, likely adaptations of snowplows locally found at hand.

Further development of the jeep

Although no other light jeeps were taken into production, it was not for lack of trying. Both key military men, who had been championing the development of military vehicle concepts they had formulated for years – sometimes already since World War One – had led to conclusions about the logic of military mechanization, as well as automakers large and small, who now saw that in wartime, all of a sudden there were budgets available to work with. Of course, this was primarily true for the firms involved so far.

After losing out on mass-production of the four-wheel drive -ton, Bantam built the Army one 4x2 quarterton chassis in 1942, but to no further consequence.

An exception was an order for a series of some 200 to 500 standardized jeeps to be modified, by Holden (then G.M. of Australia), into field ambulances for the U.S. Marine Corps in the Pacific Theater, because they found the standard ton Dodge WC-54 ambulances too unwieldy, and even their own ton, 4x4 International M-1-4 vehicles both too ponderous ''and'' too scarce.2020/2021 Military Trader article
by David Doyle (writer) In 1942, Lt. Cmdr. French Moore, MC, a battalion surgeon with the 2nd Marine Division (Camp Elliott, CA) started developing his design for an MB/GPW-based 'light field-ambulance'. He submitted blueprints, and records of performance of his prototype to Marine Corps Commandant Lt. Gen. Thomas Holcomb. It could carry up to "35 patients 1,000 yards and return, in an hour." Rebuilt to Moore's design, it was approved for fielding in time for the Solomon Island Campaign in 1943. Three series were built in modest numbers, but totaling more than the USMC's own ambulance versions of their International M-1-4 and M-2-4s.

Lightweight jeeps

After the initial design specification of a maximum weight had been raised to almost double that in production, to achieve the necessary ruggedness on the main ton, the Army still wanted a truly lightweight model for airborne missions, and use in the jungles of the Pacific theaters. In 1942 and 1943, at least five companies proposed designs: Crosley, Chevrolet, Ford, Willys, and Kaiser. The Crosley CT-3 "Pup" prototypes were superlight, one- or two-passenger, but still four-wheel-drive buggies, that were transportable and air-droppable from a Douglas C-47 Skytrain. Six of the 2-cylinder, 13 hp, Pups were deployed overseas after undergoing tests at Fort Benning, Georgia, but the project was discontinued due to several weak components. Seven of 36 Pups built are known to

Most of the competitors' models were more similar to standard jeeps, just lighter and smaller. Willys managed to reduce the weight on their 'MB-L' (MB Lightweight) to some in 1943; and Army engineers were impressed by the Chevrolet and its advanced features: a single center spar frame, and an integrated gearbox and transfer case. Kaiser created six prototypes with a 42 hp engine, but including some unfavorable design trade-offs.

Willys eventually produced even more radical designs. The Willys WAC (Willys Air Cooled) had three seats, built around a centrally mounted 24 hp Harley Davidson engine, weighed only , but was noisy and not user-friendly. Still, it showed promise, and was further developed, eventually resulting in the Willys JBC, or 'Jungle Burden Carrier'. By early 1945 this had turned into a mere motorized wheeled load-carrying platform, with a single seat, that preceded the 1950s Willys M274 'Mechanical Mule'.

In Britain, Nuffield Mechanizations and Aero cut down a Willys MB in length and width, and stripped it for minimum weight, to serve airborne forces. The Airborne Forces Development Centre in Wiltshire oversaw an entire modification program for jeeps in airborne units, involving many modifications to reduce both weight and or size, including to wedge them into Horsa gliders, for operation Market Garden.

Antitank jeeps

Besides towing 37mm antitank guns, it was also tested mounted directly on the quartertons. In early 1941, the US Army's Tank Destroyer Command was urgently looking to make their antitank guns more mobile, to better serve their tactical doctrine. One of the first prototypes, the T2 37mm Gun Motor Carriage (GMC), mounted a standard 37mm gun and gun shield on a Bantam BRC-40, aiming forward over the hood. Seven of these were built and tested, starting in May 1941, but were found awkward. So instead, eleven T2E1 GMC units aimed the 37mm gun rearwards for trials. Shooting rearwards had advantages, but this configuration also proved difficult to man and operate the gun. The units were all dismantled to regular jeeps. In 1942, the larger ton Dodge WC-52 was converted and standardized as the M6 Gun Motor Carriage, with a rear-aiming 37mm M3 gun, but these also worked poorly in the field, and most were rebuilt back to regular WC-52 trucks. Further designs were tried with stretched 6-wheel jeeps, but by 1943, the 37mm guns had become largely ineffective against German tanks.

Late in the war, in 1945, the first large-caliber recoilless rifles became available, and the first jeep-mounted tests were performed, but they only came to fruition after World WarII. One rare exception was Operation Varsity, for which two 75-mm. recoilless rifles were issued to the 17th U.S. Airborne Division, that could be mounted on their jeeps, proving useful in anti-tank fights.

Rocket jeeps

The jeep being too light to mount substantial guns, it was more suited later in the war, as a platform for rocket artillery, that didn't have the enormous recoil as conventional tube artillery. The California Institute of Technology developed two different 4.5-inch jeep-based rocket launcher systems for the U.S. Navy. Several other initiatives all used 4.5-inch rockets and tubes. Testing was also done by both U.S. Army and Marine Corps, but none of the jeep-mounted rocket launchers were built in any significant number because it was more efficient to use larger trucks that could carry more rockets. The Soviet Red Army deployed twelve units fitted with 12-rail M-8 82mm rocket launchers in the bed of a jeep, from December 1944 in the Carpathian Mountains.

Stretched and uprated jeeps

To extend the jeep's luggage space, the simplest, and most frequently used method was the addition of a rear baggage rack. In exceptional cases, units would actually stretch both body and frame of a jeep, to give it more passenger and luggage space, but for this usage, a Dodge WC model was available in many cases. Nevertheless, building stretched, 6x6 jeeps with ton cross-country payload, was explored with much interest. As early as July 1941, after the unsuccessful testing with the T2 and T2E1 37mm antitank guns mounted on Bantam jeeps, the U.S. Quartermaster Corps (QMC) thought to lengthen ton jeeps into 6WD for specialized roles, including the 37mm gun. Willys was contracted that month for both a T13 and a T14 Gun Motor Carriage, based on the Willys MA – one firing forward, and one rearwards, like the earlier Bantams. In reality, two models of rearward firing T14 were built, based on Willys ''MBs'', one slat grille in late 1941, and one or more stamped grilles, by January 1942. Although the Willys T14 was actually found to be the best of several 37mm tank destroyers tested by the U.S. Army, by that time the M6 Gun Motor Carriage (based on the, Dodge ton) had been standardized for the Tank destroyer battalions.

Nevertheless, the QMC and Willys kept developing the ton 6x6, in various versions, as the "Super-Jeep". By March 1942, the T14 GMC was revised as a cargo / prime mover, named Willys 'MT-TUG', that could compete in some roles with the ton Dodges. The Army tested these in various configurations, up to a 1-ton rated version, as a light, multi-purpose tractor truck, cargo, or personnel carrier. For the United States Army Air Force (USAAF), several MT-Tug units were built with a fifth-wheel coupling on the cargo floor, for various Fruehauf trailers, and loaded with sandbags on the cargo bed, even as aircraft tugs. The Marine Corps also wanted a beefier truck, using standard jeep components, with a higher fixed side body structure, as a personnel or mortar squad carrier, or an 'MT-CA' field ambulance.

The Willys MT models had the same ton rating as the new for 1942 Dodge WC series, but weighed only , with a range, and a top speed of . Willys pointed out that every 6x6 'Super Jeep' would save of steel for their construction, as well as 40% in fuel usage, compared to the Dodge trucks. Moreover, it comprised 65% unaltered standard jeep components, and many of the other parts were also just modified standard jeep parts. By January 1943, the Willys MT-TUG was further evaluated by the Army Transport Command at Camp Gordon Johnston, FL. It was positively reviewed there for its effortless operation in deep sand. Although the Willys ton's performance was even called 'exemplary' by some, the U.S. Army nevertheless abandoned the Willys MT in favor of the already produced ton and 1ton trucks, because the Willys was 'surplus to requirements'.

Fifteen 6x6 Willys MT(-Tug)s alone were built as "Truck, -ton, 6×6, Tractor", under Ordnance production contract W303ORD4623, production order T6620,Full article at 12.08.2012 02:34:41
/ref> and even a maintenance supplement for the "6x6 Willys MBTug" was printed with the 1943 TM101513 technical manual. Including miscellaneous test units, a total of 24 units are believed to have been built, with six known survivors.

An even smaller number of ton jeeps with a slightly stretched wheelbase were built as the Willys MLW(−1) through MLW-4 "Jungle Jeep". LW stood for Long(er) Wheelbase, to accommodate significantly larger wheels and 7.50–20 tires with a tractor-like profile, with the objective to serve in the jungles of the Pacific theater, after a September 1943 request from the South West Pacific for a truck with payload and mobility over mud and swamps of jungle terrain, superior to that of the regular jeep.Although uprating from ton to ton seems like doubling, the ton standard rating is nominal — the real standard jeep rating was on road, and off-road.

Tracked jeeps

Several tracked jeep prototypes were built, because of such a need in Alaska and Canada. After America entered the war, a Japanese attack on the Aleutians] suddenly made the Alaskan military base a zone of great military importance. The snow-rich circumstances created a need for tracked, jeep-like, all-purpose vehicles, and the Canadian Bombardier Recreational Products, Bombardier company and Willys created the T29 jeep half-track out of one of the existing 6x6 Willys MT chassis. The T-29 'Snow Tractor' (Jan 1943) expanded the rear chassis to a total of six wheels: three on each side, with a broad rubber belt serving as a track, running around two Ford model A wheels, followed by a notably larger wheel at each back corner. Instead of front wheels, the rig got skis, and the front-wheel drive-line was omitted, to save cost and weight. It was followed up with the T29E1, on which front wheels returned, but mounted on the front skis, and still non-driven, just so that the front could now both glide ''and'' roll.'Jeep modifications (continued)' (in Dutch)
/ref>

Due to Willys' workload, International Harvester helped assemble a further five T29E1 prototypes. Under the steering front wheels, skis could be mounted or removed. An Aberdeen test report critiqued that the T-29E1 was difficult to steer, as the tracks could not be controlled independently, and that prolonged use caused excessive track component wear. A completely rearranged rear was then proposed, and a T28 litter-carrier was completed for testing by August 1944. The only known surviving half-track WWII jeep is a WillysT28 named 'Penguin'. Further (fully) tracked "jeeps" were also armored, and developed for, and by Canada — see armored jeeps.

Armored jeeps

Many jeeps received added armor in the field, especially in Europe in 1944–1945. Frequently, a rear slanting armor plate was added in front of the grille, and replacing the windshield, as well as the sides, in place of where doors would be. The upper, biggest part was typically made of a single, large, 5/16th inch steel plate, folded in three, with two different sight openings in the front.

Since reconnaissance was one of the jeep's primary purposes, there was a demand for some armor from the start of production. Starting April 1942, the second T14 GMC 6x6 Willys MT-Tug chassis was converted to the T24 Scout Car. Though performing well in trials, the T24 was abandoned in the autumn in favor of the M8 & M20 Light Armored Car. Concurrently, the Ordnance Corps was pushed to work on a lightly armored reconnaissance design, based on the standard Willys 4x4 jeep. Different armor configurations were tested on the T25 through T25E3 prototypes respectively. For all 4x4 armored jeeps, the significant weight increase reduced their payload, and adversely affected their mobility.

Canada created a light, tracked, armored, and armed vehicle using Jeep automotive components. In late 1942, the Canadian Department of National Defence (DND)'s Directorate of Vehicles and Artillery (DVA) began work at No.1 Proving Ground in Ottawa on a small tracked vehicle successively named: 'Bantam Armoured Tracked Vehicle', the 'Light Recce Tank', and finally: the 'Tracked Jeep', TJ.
left, The Canadian "Tracked Jeep" Mk.1 in the Canadian War Museum.

The Canadian "Tracked Jeep" Mk.1 measured long, and wide, by high; it had a maximum armor of 12mm (-inch), and aimed at top speeds of 56 km/h (35 mph) on land and 8 km/h (5 mph) in the water. The vehicle was intended for taking messages over contested ground, armored reconnaissance, and engaging unarmored enemy troops in airborne and combined operations. Willys and Marmon-Herrington were contracted for five more prototypes, Willys for power train components, and MH for the armored hulls and the Hotchkiss-type running gear. The Tracked Jeep showed excellent cross-country performance and uphill mobility was better than other light tracked utility vehicles, while its amphibious capability was adequate, despite its low freeboard. There were however serious shortcomings with the running-gear and tracks. Work to fix this delayed testing until late 1944, and British insights demanded such fundamental changes, that a Mk.2 version was developed, of which another six units were fabricated, and not ready until after the war had ended. The problems with tracks and running gear were still not sorted out, and development halted. America had observed the Canadian effort, but saw no advantages, compared to the M29'Weasel' Tracked Cargo Carrier.

Flying jeep

The most extreme concept tried was to turn the jeep into a rotor kite (or gyrokite), similar to an autogyro – the Hafner Rotabuggy (officially Malcolm Rotaplane). Designed by Raoul Hafner in 1942, and sponsored by the Airborne Forces Experimental Establishment (AFEE), after their Rotachute enjoyed some success, a passive rotor assembly was added over the jeep cabin, along with a lightweight tail, for stabilization. This jeep could be towed into the air by a transport or bomber tug. The Rotabuggy would then be towed to the drop zone as a rotary-wing glider. It took until autumn 1944 to achieve a decent test flight, and other military gliders, particularly the Waco Hadrian and Airspeed Horsa) made the Rotabuggy superfluous. Incidentally, it was first named the "Blitz Buggy", but that was soon dropped for "Rotabuggy".

Etymology

There is no consensus among historians as to how the U.S. Army's World War II quarter-ton reconnaissance car became known as the "jeep", let alone how the word originated in the first place. Explanations have proven difficult to verify. With certainty, the term "jeep" was already in use before the war, designating various things, while the -ton jeeps at first had many different designations and nicknames.

Eugene the Jeep and prior usage of "jeep"

According to several knowledgeable authors, the word "jeep" was used well before World War II; career soldiers used it since World War I – both as casual U.S. Army slang for new, uninitiated recruits or other personnel who still had to prove their mettle, as well as used by Army motor pool mechanics, about any new, unproven vehicles or prototypes. Zaloga also describes use as an adjective: "''jeepy''," similar to 'cooky' or 'goofy,' to mean anything insignificant, silly, awkward or foolish.

Later, in mid-March 1936, a character called Eugene the Jeep was created in E. C. Segar's ''Popeye

HOME


Content is Copyleft
Website design, code, and AI is Copyrighted (c) 2014-2017 by Stephen Payne


Consider donating to Wikimedia



As an Amazon Associate I earn from qualifying purchases