Austin A60 Cambridge
   HOME

TheInfoList



OR:

:''See
Austin 10 The Austin Ten is a small car that was produced by Austin. It was launched on 19 April 1932 and was Austin's best-selling car in the 1930s and continued in production, with upgrades, until 1947. It fitted in between their "baby" Austin Seven w ...
for the Cambridge models of 1937 to 1947.'' :''See Austin A40 for other A40 models.'' The Austin Cambridge (sold as A40, A50, A55, and A60) is a medium-sized
motor car A car or automobile is a motor vehicle with wheels. Most definitions of ''cars'' say that they run primarily on roads, seat one to eight people, have four wheels, and mainly transport people instead of goods. The year 1886 is regarded as t ...
range produced by the Austin Motor Company, in several generations, from September 1954 through to 1971 as cars and to 1973 as light commercials. It replaced the A40 Somerset and was entirely new, with modern
unibody A vehicle frame, also historically known as its '' chassis'', is the main supporting structure of a motor vehicle to which all other components are attached, comparable to the skeleton of an organism. Until the 1930s, virtually every car ha ...
construction. The range had two basic body styles with the A40, A50, and early A55 using a traditional rounded shape and later A55 Mark IIs and A60s using
Pininfarina Pininfarina S.p.A. (short for Carrozzeria Pininfarina) is an Italian car design firm and coachbuilder, with headquarters in Cambiano, Turin, Italy. The company was founded by Battista "Pinin" Farina in 1930. On 14 December 2015, the Indian ...
styling. The A40 number was re-used on a smaller car (the
Austin A40 Farina :''See Austin A40 for other (previous) Austin A40 models.'' The Austin A40 Farina is a small, economy car introduced by Austin in saloon (1958) and A40 Countryman (1959) estate versions. It has a two-box body configuration. It was badged, lik ...
) from 1958 to 1968, and the Cambridge name had previously been used to designate one of the available body styles on the pre-war 10 hp range. The Austin Cambridge was initially offered only with a four-passenger, four-door saloon body, although a few pre-production two-door models were also made. It had a modern body design with integrated wings and a full-width grille. Independent suspension was provided at the front by coil springs and wishbones while a live axle with anti-roll bar was retained at the rear. A van derivative introduced in November 1956 and a
coupé utility A coupé utility is a vehicle with a passenger compartment at the front and an integrated cargo tray at the rear, with the front of the cargo bed doubling as the rear of the passenger compartment. The term originated in the 1930s, where it wa ...
(pick up) introduced in May 1957 and remained available until 1974, some three years after the demise of the cars on which they had been based.


A40 Cambridge

A 1.2-litre straight-four
pushrod engine An overhead valve (OHV) engine, sometimes called a ''pushrod engine'', is a piston engine whose valves are located in the cylinder head above the combustion chamber. This contrasts with earlier flathead engines, where the valves were located bel ...
B-Series engine based on the one used in the previous Austin Somerset (although sharing no parts) powered the new Austin Cambridge. A maximum power output of was claimed: power was transmitted to the wheels by means of a four-speed gear box controlled with a column-mounted lever. The A40 Cambridge was intended to be available in both two-door saloon and four-door saloon variants; however, the two-door body style did not reach production. Only 30,666 A40 Cambridge models were produced. After the A40 Cambridge was dropped early in 1957, the A40 name was re-used on the smaller A40 Farina, though that car, the 'Countryman' version of which was an early example of a hatchback, was neither a replacement nor much related to the A40 Cambridge.


A50 Cambridge

Also introduced in September 1954, and with a body identical to that of the A40 Cambridge, was the A50 Cambridge which used a new 1.5-litre (1,489 cc) B-Series four-cylinder engine with single Zenith carburettor which was good for 50 hp (37 kW). It sold better and remained in production through to 1957 with 114,867 A50s being produced The deluxe version had a heater, leather seat facings, carpets replacing the standard rubber matting, armrests on the doors, twin-tone horns, a passenger sun visor, and some extra chrome, including overriders. Technical advances in the A50 Cambridge included an optional Borg-Warner overdrive unit for the top three (of four) gears. A
semi-automatic transmission A semi-automatic transmission is a "theoretical" multiple-speed transmission where part of its operation is automated (typically the actuation of the clutch), but the driver's input would be required to launch the vehicle from a standstill and t ...
(branded "manumatic" and providing pedal-free clutch operation) was also offered, but it was unpopular with buyers. A number of modifications were introduced in October 1956, including smaller wheels and an increased compression ratio (8.3:1). A deluxe version tested by ''
The Motor ''The Motor'' (later, just ''Motor'') was a British weekly car magazine ''Car'' is a British automotive enthusiast magazine published monthly by Bauer Consumer Media. International editions are published by Bauer Automotive in Republi ...
'' magazine in 1955, had a top speed of and could accelerate from 0– in 28.8 seconds. A fuel consumption of was recorded. The test car cost £720 including taxes. A radio and a clock were optional extras. As with its predecessor the A40 Somerset, the A50 Cambridge was built under licence by Nissan in Japan; the arrangement ended in 1959. In total, 20,855 licensed Austin vehicles were produced by Nissan in Japan.


A55 Cambridge

In January 1957, the A55 Cambridge was introduced to replace the A50 model. It used the same 1.5-litre B-Series engine as its predecessor, though with a higher compression ratio. It was rated at 51 hp (38 kW) at 4,250 rpm. The Cambridge had been restyled somewhat and now had a larger boot and much larger rear window. The car was also lowered by fitting road wheels which were smaller than those on the A50 but the overall gearing remained the same by changing the rear axle ratio. Two-tone paint was an option. Some 154,000 were produced before it was replaced by a new Pininfarina-designed A55 Cambridge for 1959. A deluxe A55 with manumatic transmission was tested by ''The Motor'' magazine in 1957 had a top speed of and could accelerate from 0- in 27.0 seconds. A fuel consumption of was recorded. The test car cost £870 including taxes of £291. File:Austin_A55_Cambridge_side.jpg, Austin A55 Cambridge in profile


Half-ton commercials

Half-ton commercial models based on the A55 were introduced in 1957.Austin & Morris Half Ton Van & Pick Up
Retrieved 4 August 2011
The van was released in February and was followed in May by pick-up, chassis and cab and chassis and scuttle models. Contemporary sales literature used the term "Austin ½ ton van and pick-up". In October 1962, new models were introduced with a restyled front end and bumper, chrome side mouldings, 14" wheels, and various interior refinements. Morris-badged van and pick-up models also were now offered. From September 1963, the commercial models were fitted with the engine from the Austin A60 saloon, with the Austins still marketed under the "Austin ½ ton" name. They remained in production to 1973. File:Austin A55 pu in Athens.jpg, Austin 1/2 ton pick-up (pre-facelift) File:1971 Austin (VOD 179J) panel van, 2012 HCVS Tyne-Tees Run.jpg, Austin 1/2 ton van (pre-facelift) File:Morris half ton van license plate 1970 based on pre Farina Austin Cambridge saloon.jpg, Morris 1/2 ton van


Australian production

The A55 Cambridge saloon was assembled by
BMC Australia British Motor Corporation (Australia) was a motor manufacturing company formed in Australia in 1954 by the merger of the Austin Motor Company (Australia) and Nuffield (Australia). This followed the merger in 1952 of the Austin Motor Company and ...
and a coupe utility version was designed and assembled by the Sydney-based Pressed Metal Corporation, a subsidiary of Larke, Neave and Carter, Austin Distributors.BMC-Leyland Australia Heritage Group, Building Cars in Australia, 2007, page 198.


A55 Cambridge Mark II

The A55 Cambridge Mark II, known as the first "Farina" model because of its Pininfarina design, was produced from 1959 through to 1961. It was a
rebadged In the automotive industry, rebadging is a form of market segmentation used by automobile manufacturers around the world. To allow for product differentiation without designing or engineering a new model or brand (at high cost or risk), a man ...
Morris Oxford Morris Oxford is a series of motor car models produced by Morris of the United Kingdom, from the 1913 ''bullnose'' Oxford to the ''Farina'' Oxfords V and VI. Named by W R Morris after ''the city of dreaming spires'', the university town in which ...
and retained the 1.5 litre B-Series engine, now with an SU carburettor, and producing at 4,350 rpm. The interior had individual leather trimmed seats in front spaced closely together to allow a central passenger to be carried. The gear change was either on the column or floor-mounted and the handbrake lever between the driver's seat and the door. Other improvements highlighted at the time included an enlarged luggage compartment with counterbalanced lid and increased elbow width on both front and rear seats. A heater could be fitted as an option. A "Countryman" estate model appeared in 1960. The Austin Cambridge estates was called the "Countryman". (Morris Oxford Estates were called "Travellers".) A55 Mark II and A60 estates were identical from the windscreen back; the later models never got the reduced rear fins and modified rear lights of the A60 saloons. The engineering of the car was conventional with coil sprung independent front suspension and a live axle at the rear with semi elliptic leaf springs. The braking used a Girling system with drums all round. A total of 149,994 were built. A MkII A55 was tested by ''The Motor'' magazine in 1959 had a top speed of and could accelerate from 0– in 24.5 seconds. A fuel consumption of was recorded. The test car cost £878 including taxes of £293.


Australian production

The A55 Mk II entered production in Australia in 1959 with a 1,622 cc version of the B Series four-cylinder engine as the Austin A60.Austin Freeway
Retrieved from www.co-oc.org on 26 February 2010
Australian use of the larger engine and the A60 name preceded British usage by two years. The A60 was replaced in 1962 by a revised model powered by a six-cylinder 2,433 cc engine. It was marketed as the
Austin Freeway The Austin Freeway is an automobile which was developed by BMC Australia, based on the British Austin A60 Cambridge. Introduced in 1962, it was marketed under the Austin name in both four-door sedan and five-door station wagon body styles. ...
and was produced by
BMC Australia British Motor Corporation (Australia) was a motor manufacturing company formed in Australia in 1954 by the merger of the Austin Motor Company (Australia) and Nuffield (Australia). This followed the merger in 1952 of the Austin Motor Company and ...
until 1965.


A60 Cambridge

An upgraded Cambridge model, now called the A60, was introduced in October 1961. It included a new 1.6-litre version of the B-Series straight-four engine which had first been used in the MGA. Power is at 4500 rpm. Modified styling included side chrome stripes – some models with contrasting colour infills – and reduced fins on the rear wings. The style continued to be known as "Farina". This body covered a chassis that was slightly longer in wheelbase and wider in track than the A55. This allowed three people to be accommodated on the rear seat. Anti-roll bars were added to both front and rear suspension. An estate version with the petrol engine, called the Countryman, was also offered.The A60 from 1966 was offered with many optional extras including a more powerful dual carburetor version to keep up with increasing competition from the Continent and Japan. A
diesel Diesel may refer to: * Diesel engine, an internal combustion engine where ignition is caused by compression * Diesel fuel, a liquid fuel used in diesel engines * Diesel locomotive, a railway locomotive in which the prime mover is a diesel engin ...
version was introduced in 1961 for export cars and was available in the UK from 1962. Early manual models had the option of column gear change. The Borg Warner three-speed Type 35 automatic transmission was an option, the first British car to be fitted with this type, with the selector on the steering column. A 1.5-litre diesel option, mainly for the taxi trade, was introduced in November 1962. With only , top speed was limited to . The A60 Cambridge sold well, with 276,534 being built before production finally ended in 1969. Its intended successor, the
front-wheel-drive Front-wheel drive (FWD) is a form of engine and transmission layout used in motor vehicles, where the engine drives the front wheels only. Most modern front-wheel drive vehicles feature a transverse engine, rather than the conventional longi ...
Austin 1800 As of March 1 ( O.S. February 18), when the Julian calendar acknowledged a leap day and the Gregorian calendar did not, the Julian calendar fell one day further behind, bringing the difference to 12 days until February 28 ( O.S. February 16) ...
of 1964, did not affect sales, so Cambridge production was continued until 1969 at the
Morris Morris may refer to: Places Australia *St Morris, South Australia, place in South Australia Canada * Morris Township, Ontario, now part of the municipality of Morris-Turnberry * Rural Municipality of Morris, Manitoba ** Morris, Manitob ...
plant at Cowley when the Austin Maxi took over production line. The Morris Oxford version continued in production until 1971, when the
Morris Marina The Morris Marina is a front-engined, rear-wheel-drive small family car that was manufactured by the Austin-Morris division of British Leyland from 1971 until 1980. It served to replace the Morris Minor in the Morris product line, which ...
was launched. Austin A60 saloons assembled in Ireland by Brittain Smith of Portobello, Dublin 2 were identifiable by the use of Morris Oxford series VI tail-lights. The last of these were produced in 1970, and some were registered in 1971. The A60 Cambridge was effectively replaced by the Austin Maxi hatchback in April 1969, while the Oxford continued until early 1971, when it was replaced by the Morris Marina. Both a manual and automatic version of the A60 were tested by ''The Motor'' magazine in 1961. The manual had a top speed of and could accelerate from 0– in 19.8 seconds. A touring fuel consumption of was recorded. The test car cost £883 including taxes of £278. The automatic was slightly slower, with a top speed of and acceleration from 0– in 24.9 seconds. A touring fuel consumption of was recorded. The car cost £982 including taxes of £309.


References


External links


Austin Memories
€”History of Austin and Longbridge
Austin Cambridge / Westminster Car Club (ACWCC)
– Classic car club for all owners and enthusiasts of this range of BMC cars. Dedicated to the A40, A55 and A60, Westminster, Morris Oxford, MG Magnette, and other Riley & Wolseley derivatives.
Cambridge-Oxford Owners Club (COOC)
– a worldwide owners club which caters for these cars and their Westminster-derived six-cylinder sisters. The club aims to keep the cars on the road, provides advice, spares and a social forum for enjoying the cars. {{British Motor Holdings and British Leyland cars, 1966-1986
Cambridge Cambridge ( ) is a College town, university city and the county town in Cambridgeshire, England. It is located on the River Cam approximately north of London. As of the 2021 United Kingdom census, the population of Cambridge was 145,700. Cam ...
1960s cars Compact executive cars Rear-wheel-drive vehicles Cars introduced in 1954 Sedans Station wagons