Allard Motor Company
   HOME

TheInfoList



OR:

Allard Motor Company Limited was a London-based low-volume car manufacturer founded in 1945 by
Sydney Allard Sydney Herbert Allard (19 June 1910 – 12 April 1966) was the founder of the Allard car company and a successful rally driver and hillclimb driver in cars of his own manufacture. Trials, hillclimbs, rallies, and road racing Born in London, E ...
''The Times'', 13 April 1966, Obituary. in small premises in Clapham, south-west London. Car manufacture almost ceased within a decade. It produced approximately 1900 cars before it became insolvent and ceased trading in 1958. Before the war, Allard supplied some replicas of a Bugatti-tailed special of his own design from Adlards Motors in
Putney Putney () is a district of southwest London, England, in the London Borough of Wandsworth, southwest of Charing Cross. The area is identified in the London Plan as one of 35 major centres in Greater London. History Putney is an ancient paris ...
. Allards featured large American V8 engines in a light British chassis and body, giving a high
power-to-weight ratio Power-to-weight ratio (PWR, also called specific power, or power-to-mass ratio) is a calculation commonly applied to engines and mobile power sources to enable the comparison of one unit or design to another. Power-to-weight ratio is a measuremen ...
and foreshadowing the Sunbeam Tiger and
AC Cobra The AC Cobra, sold in the United States as the Shelby Cobra and AC Shelby Cobra, is a sports car manufactured by British company AC Cars, with a Ford V8 engine. It was produced intermittently in both the United Kingdom and later the Unite ...
of the early 1960s. Cobra designer
Carroll Shelby Carroll Hall Shelby (January 11, 1923 – May 10, 2012) was an American automotive designer, racing driver, and entrepreneur. Shelby is best known for his involvement with the AC Cobra and Mustang for Ford Motor Company, which he modified dur ...
and
Chevrolet Corvette The Chevrolet Corvette is a two-door, two-passenger luxury sports car manufactured and marketed by Chevrolet since 1953. With eight design generations, noted sequentially from C1 to C8, the Corvette is noted for its performance and distinctiv ...
chief engineer
Zora Arkus-Duntov Zora Arkus-Duntov (December 25, 1909 – April 21, 1996) was a Belgian-born American engineer whose work on the Chevrolet Corvette earned him the nickname "Father of the Corvette." He is sometimes erroneously referred to as the inventor of the Co ...
both drove Allards in the early 1950s.


Pre-war Allard Specials

The first Allard cars were built to compete in "trials" events – timed rally-like events on terrain almost impassable by wheeled vehicles. Built in under three weeks, the first Allard was powered by a
Ford flathead V8 Ford commonly refers to: * Ford Motor Company, an automobile manufacturer founded by Henry Ford * Ford (crossing), a shallow crossing on a river Ford may also refer to: Ford Motor Company * Henry Ford, founder of the Ford Motor Company * Ford F ...
in a body mainly pirated from a Bugatti. The V8 was moved backward in the chassis to improve traction. The car used the American engine's high
torque In physics and mechanics, torque is the rotational equivalent of linear force. It is also referred to as the moment of force (also abbreviated to moment). It represents the capability of a force to produce change in the rotational motion of th ...
to great effect in slow-speed competition. It debuted at the Gloucester Cup Trials, and later won the event at Southport Sands. After a time the front
beam axle A beam axle, rigid axle or solid axle is a dependent suspension design in which a set of wheels is connected laterally by a single beam or shaft. Beam axles were once commonly used at the rear wheels of a vehicle, but historically they have als ...
was converted to
independent front suspension Independent suspension is any automobile suspension system that allows each wheel on the same axle to move vertically (i.e. reacting to a bump on the road) independently of the others. This is contrasted with a beam axle or deDion axle system in ...
. Leslie Ballamy's rather crude method was to cut the beam in half and mount the halves as
swing axle A swing axle is a simple type of independent (rear wheel) suspension designed and patented by Edmund Rumpler in 1903. This was a revolutionary invention in automotive suspension, allowing driven (powered) wheels to follow uneven road surfaces ...
s and these swing axles were used on nearly all later Allard specials. Further Allards were soon built to order. Allard's brother, Leslie, was a customer, while racer Ken Hutchinson purchased a
Lincoln-Zephyr The Lincoln-Zephyr is a line of luxury cars that was produced by the Lincoln division of Ford from 1936 until 1942. Bridging the gap between the Ford V8 DeLuxe and the Lincoln Model K (in both size and price), it expanded Lincoln to a seco ...
V12-powered version. It led to the pair forming a team, dubbed Tail Waggers, to race the car, which proved quite successful, including setting a new record at the Prescott hillclimb. In 1937, Allard began producing modified Fords (in much the same way as the Chevrolet brothers had in the U.S.), selling them for £450 each. By the outbreak of
war War is an intense armed conflict between states, governments, societies, or paramilitary groups such as mercenaries, insurgents, and militias. It is generally characterized by extreme violence, destruction, and mortality, using regular o ...
in 1939, twelve Allard Specials had been built. Sydney Allard's planned volume production was pre-empted by work on Ford-based trucks during the conflict. By the
war's end ''War's End'' is a journalistic comic about the Bosnian War written by Joe Sacco. It contains two stories; the first, ''Christmas with Karadzic'', about tracking down and meeting the Bosnian Serb leader Radovan Karadžić, and the second, ''Soba'', ...
, Allard had built up a substantial inventory of Ford parts.


Post-war models

The Allard Motor Company was founded in 1945, setting up in Clapham High Street, London. Using its inventory of easy-to-service Ford mechanicals built up during World War II and bodywork of Allard's own design, three post-war models were introduced with a newly designed steel chassis and lightweight body shells: the J, a competition sports car; the K, a slightly larger car intended for road use, and the four seater L. All three were based on the Ford Pilot chassis and powered by a fairly stock sidevalve V8 with a single carburettor and 6:1 compression, driving a three-speed
transmission Transmission may refer to: Medicine, science and technology * Power transmission ** Electric power transmission ** Propulsion transmission, technology allowing controlled application of power *** Automatic transmission *** Manual transmission ** ...
and low-geared rearend, for superior acceleration. Front suspension was Ballamy swing axle, rear Ford solid axle. They were bodied in aluminium by Allard's friend Godfrey Imhof. Sales were fairly brisk for a low-volume car, and demand was high for cars in general, which led to the introduction of several larger models, the drophead coupe M and P. Allard used "J" for the short-wheelbase two-seaters, "K" for two- or three-seat tourers or roadsters, "L" for four-seat tourers, "M" for drophead (convertible) coupes, and "P" for fixed-head cars. As models were replaced, subsequent models were numbered sequentially.


J


J1

Built from 1946 to 1947, the J1 was released as a two-seater competition car together with the K1 touring two-seater and the L- Type touring 4-seater. The J1 was a starkly trimmed and equipped 2-seater competition car on a wheelbase. Powered by a
overhead valve An overhead valve (OHV) engine, sometimes called a ''pushrod engine'', is a piston engine whose valves are located in the cylinder head above the combustion chamber. This contrasts with earlier flathead engines, where the valves were located be ...
Mercury V8, the J1 had a top speed of , limited by the low rear axle gearing. Only 12 were produced and went only to buyers who would rally them. They had good ground clearance and the front wings were removable. Copies driven by Allard himself, Maurice Wick, and others, and was a successful racer. Imhof won the 1947 Lisbon Rally in a J1 powered by a Marshall-supercharged version, while Leonard Potter took the ''Coupe des Alpes'' that year.


J2

Sydney Allard soon saw the potential of the economically more vibrant – but sports car starved – U.S. market and developed a special competition model to tap it, the J2. The new roadster, weighing just , was a potent combination of a lightweight, hand-formed aluminium body fitted with new coil spring front suspension, fitted with inclined telescopic dampers, and de Dion-type rear axle, inboard rear brakes, and , Mercury flathead V8, with the option of an Ardun hemi conversion. The J2 had a disturbing tendency to catch fire when started. Importing American engines just to ship them back across the Atlantic proved problematic, so U.S.-bound Allards were soon shipped engineless and fitted out in the States variously with newer overhead valve engines by Cadillac, Chrysler, Buick, and Oldsmobile. In that form, the J2 proved a highly competitive international race car for 1950, most frequently powered by Cadillac engines. Domestic versions for England came equipped with Ford or Mercury flatheads. Zora Duntov worked for Allard from 1950 to 1952 and raced for the factory Allard team at Le Mans in 1952 and 1953. Available both in street trim and stripped down for racing, the J2 proved successful in competition on both sides of the Atlantic, including a third place overall at
Le Mans Le Mans (, ) is a city in northwestern France on the Sarthe River where it meets the Huisne. Traditionally the capital of the province of Maine, it is now the capital of the Sarthe department and the seat of the Roman Catholic diocese of Le ...
in 1950 (co-driven by
Tom Cole Thomas Jeffery Cole (born April 28, 1949) is the U.S. representative for , serving since 2003. He is a member of the Republican Party and serves as Deputy Minority Whip. The chairman of the National Republican Congressional Committee (NRCC) fr ...
and Allard himself) at an average , powered by a Cadillac V8. J2s returned to Le Mans in 1951, one co-driven again by Cole and Allard, the other by Reece and Hitchings; Reece jumped an embankment, while the Allard car broke. They had no more success in 1952, both cars failing to finish. Of 313 documented starts in major races in the 9 years between 1949 and 1957, J2s compiled 40 first-place finishes; 32 seconds; 30 thirds; 25 fourths; and 10 fifth-place finishes. Both Zora Duntov and
Carroll Shelby Carroll Hall Shelby (January 11, 1923 – May 10, 2012) was an American automotive designer, racing driver, and entrepreneur. Shelby is best known for his involvement with the AC Cobra and Mustang for Ford Motor Company, which he modified dur ...
raced J2s in the early 1950s. Ninety J2s were produced between 1950 and 1952.


J2X

In an effort to extend a line growing obsolete in the face of advances in sports car design, Allard introduced an 'improved' model in late 1951, the J2X (extended). The chassis remained unchanged from the previous J2, but in an attempt to improve handling, the front suspension's rear attaching radius rods were redesigned with forward ones, which required a forward cross member and extending the nose past the front wheels. This, in turn, allowed the engine to be moved forward , yielding more cockpit room. The nose was lengthened some to accommodate the change. In standard form, the spare wheel was carried hidden on top of the rear-mounted fuel tank, but either version could carry one or two side-mounted spares. This allowed the use of a 40 gallon long distance fuel tank. Arriving later, during a time when sports racing car design was developing rapidly, the J2X was not as successful in international racing as the J2, as it was not as competitive compared to more advanced C- and D-type Jaguars, alongside Mercedes, Ferrari, and Maserati works entries. Thus, it headlined less often in major international races and of 199 documented major race starts in the 9 years between 1952 and 1960, J2X's garnered 12 first-place finishes; 11 seconds; 17 thirds; 14 fourths; and 10 fifths. One J2X chassis was given custom magnesium-alloy bodywork by Essex Aero.


JR

This 1953 car was a lightweight specialist racer, powered by a Cadillac engine claimed to produce . Entered at Le Mans that year, the Allard/Fotheringham-Parker car suffered a broken rear suspension, while the Duntov/Merrick car also retired. This was the marque's last effort at Le Mans. Seven cars were built in total, with the last car finished in 1956.


K


K1

Built from 1946 to 1948, the K1 used a wheelbase and was powered by a tuned version of the V8, with 7:1 compression, producing . The frame was made up from stamped steel channel sections by Thomsons of Wolverton specially for Allard. Side rails and cross members were designed to fit the Allard trailing link, transverse leaf independent front suspension and live rear axle. Production totaled 151 and fitted with the same engine options as the J1 the K1 could reach .


K2

The K2 is a 2-seater sports car produced from 1950 to 1952. It was offered with Ford and Mercury V8s in the home market and with
Chrysler Stellantis North America (officially FCA US and formerly Chrysler ()) is one of the " Big Three" automobile manufacturers in the United States, headquartered in Auburn Hills, Michigan. It is the American subsidiary of the multinational automotiv ...
and
Cadillac The Cadillac Motor Car Division () is a division of the American automobile manufacturer General Motors (GM) that designs and builds luxury vehicles. Its major markets are the United States, Canada, and China. Cadillac models are distributed ...
V8s in the USA. 119 were built.


K3

In 1952, Allard adapted the Palm Beach in a K3, an attempt to offer a more civilized variant of the J2 and J2X models seen at the track. Exported to America as a potential "Corvette slayer" Dodge dealers had been clamoring for, it featured one of the most powerful engines of its era, the
Chrysler hemi engine The Chrysler Hemi engines, known by the trademark Hemi, are a series of American V8 gasoline engines built by Chrysler with overhead valve hemispherical combustion chambers. Three different types of Hemi engines have been built by Chrysler f ...
, fitted with a pair of 4-barrel carburetors.Allards sold at RM Sothebys
''rmauctions.com'', accessed 29 December 2018
Essentially an up-enginged, rebodied Palm Beach, it failed to find a niche in either market in spite of its performance. Today the exceptionally rare automobile can fetch the better part of US$250,000 at auction. 62 examples were built, of which 57 were delivered to the United States.


L

The L is a 4-seat roadster, produced from 1946 to 1950.Sedgwick, Michael, and Gillies, Mark. ''A-Z of Cars 1945–1970'' (Haymarket Publishing Limited, 1986), pp. 14 & 15 It was on a wheelbase and available with a choice of Ford V8 or Mercury engines. The top speed is estimated to be . Priced at a little more than £1000, 191 were produced.


P


P1

Known more often than not simply as the Allard 3.6-litre Saloon, the P1 was a five-seat, two-door sports saloon produced between 1949 and 1952. The cars used Ford engines and transmissions, and included a "Sports" model. In 1952 an Allard P1, driven by Sydney Allard himself, along with Guy Warburton, won the Monte Carlo Rally. Tom Lush was the navigator. The P1 was the choice of professionals who wanted something different and was quite popular with doctors and solicitors in its day. Some 559 were produced during the model's run. Today it is believed fewer than 45 remain worldwide.


P2 Monte Carlo

The P2 Monte Carlo was a 2-door saloon variant of the K3, produced from 1952 to 1955. It utilised a wood frame with aluminium panels on a 112-inch wheelbase and was offered with 3.6-litre Ford Pilot V8 and 4.4-litre Mercury V8 engines. 11 were built.


P2 Safari

In an attempt to further extend its line, Allard adapted its P1 saloon to produce the 8-seater, wood-sided, V8-engined, P2 Safari Estate. It too found weak sales, with 13 examples being built in total.


M

The M appeared in 1948, remaining in production until 1950. It was a drophead coupé.


Clipper

The 1953 Clipper was an attempt to cash in on the era's burgeoning
microcar Microcar is a term often used for the smallest size of cars, with three or four wheels and often an engine smaller than . Specific types of microcars include bubble cars, cycle cars, invacar, quadricycles and voiturettes. Microcars are oft ...
market. A tiny glass-fibre-bodied car powered by a rear-mounted 346 cc Villiers twin-cylinder motorcycle engine, it claimed to seat three people abreast with room for two children in an optional
Dicky seat A rumble seat (American English), dicky (dickie/dickey) seat (British English), also called a mother-in-law seat, is an upholstered exterior seat which folded into the rear of a coach, carriage, or early motorcar. Depending on its configuration ...
. About 20 were made.


Palm Beach

Allard introduced the Palm Beach roadster in 1952. It had a wheelbase, it was powered by either a
Ford Consul The Ford Consul is a car that was manufactured by Ford of Britain from 1951 until 1962. The name was later revived for a model produced by Ford in both the UK and in Germany from 1972 until 1975. Between 1951 and 1962, the Consul was the four-cyl ...
inline four or
Ford Zephyr The Ford Zephyr is an executive car manufactured by Ford of Britain from 1950 until 1972. The Zephyr and its luxury variants, the Ford Zodiac and Ford Executive, were the largest passenger cars in the British Ford range from 1950 until their re ...
inline six. Priced under £1200, the MkI was built until 1958. It sold poorly. A Mark II was introduced in 1956, with more modern bodywork. It could be had with Zephyr or
Jaguar XK120 The Jaguar XK120 is a sports car manufactured by Jaguar between 1948 and 1954. It was Jaguar's first sports car since SS 100 production ended in 1939. The XK120 is a highly desirable model. In 2016, Bonhams sold a matching numbers left-hand- ...
inline six. The split front axle was replaced by
torsion bar A torsion bar suspension, also known as a torsion spring suspension, is any vehicle suspension that uses a torsion bar as its main weight-bearing spring. One end of a long metal bar is attached firmly to the vehicle chassis; the opposite end termi ...
s and coil springs were fitted in the back.


P4

Car designer Chris Humberstone licensed the Allard name from Sydney's son Alan Allard in the 1990s. He developed the J2X-C prototype racer, powered by a 3.5 liter Cosworth V8 engine and a transmission also grafted from an F1 car. Short of money, Humberstone allegedly attempted to work a deal with Toyota, which would have seen examples of the first-generation Lexus LS400 be rebadged and sold as Allards to help build attention and capital for the J2X-C racer. According to sources from the time, the deal between Allard and Toyota was allegedly proceeding well, but fizzled and ultimately fell flat for unknown reasons. The Allard P4 follows the same formula as another re-styled Anglo-Japanese hybrid, the Sterling 825, with Allard handling the design aspects while Lexus covered all the performance essentials. That meant the P4 was powered by the LS400's 4.0 liter V8, which delivered 250 horsepower to the rear wheels. The exterior styling still retained a robust Lexus flavor. Still, Allard designers tried to make it somewhat different thanks to a revised front and rear fascia, basketweave wheels, and a red and black interior. Unfortunately, the P4 did little to help the J2X-C program, which collapsed after the car failed to meet its performance targets and the company itself liquidating during development.


Decline

Insufficient research and development meant that Allard failed to keep up with cheaper and more technically advanced cars. The Palm Beach was essentially a year behind its competitors, the K3 failed to live up to expectations, and the Safari Estate could not find a market. By the mid-1950s Allard was struggling to remain solvent, and with the market weak due to a late-1950s US recession, the company went into administration in 1957, when manufacture of cars came to an end. The company also offered
disc brake A disc brake is a type of brake that uses the calipers to squeeze pairs of pads against a disc or a "rotor" to create friction. This action slows the rotation of a shaft, such as a vehicle axle, either to reduce its rotational speed or to h ...
conversions for the
Ford Anglia The Ford Anglia is a small family car that was designed and manufactured by Ford UK. It is related to the Ford Prefect and the later Ford Popular. The Anglia name was applied to various models between 1939 and 1967. In total, 1,594,486 Anglias ...
. In 1961, the company offered a dragster, the Dragon, powered by a Shorrock-
supercharged In an internal combustion engine, a supercharger compresses the intake gas, forcing more air into the engine in order to produce more power for a given displacement. The current categorisation is that a supercharger is a form of forced indu ...
1.5 liter Ford, and was distributor of the superchargers, later also taking over production of them. Allard's son, Alan, marketed the Allardette 105, 109, and 116, using the straight-four-cylinder engine from the
Ford Anglia The Ford Anglia is a small family car that was designed and manufactured by Ford UK. It is related to the Ford Prefect and the later Ford Popular. The Anglia name was applied to various models between 1939 and 1967. In total, 1,594,486 Anglias ...
and other Ford models. In 1966 Sydney Allard died on the same night a fire destroyed the Clapham factory and some of the Allard Motor Company factory records. The factory site in Clapham, South West London, is now a development of social housing apartments, and the showroom and workshop in Putney is now a Howdens Joinery trade products showroom.


Marque Revival

In 2012, a new Allard company was established called Allard Sports Cars Limited. This company has produced a period correct continuation chassis 3408 of the JR, and announced the development of a new J8 model in 2017. The company officially reopened its business and began production in September 2018.


See also

*
List of car manufacturers of the United Kingdom :''This list is incomplete. You can help by adding correctly sourced information about other manufacturers.'' As of 2018 there are approximately 35 active British car manufacturers and over 500 defunct British car manufacturers. This page lists ...


References


Bibliography


External links


Comprehensive Allard racing record

Allard Register – Preserving and sharing the history of the Allard Motor Company




{{Automotive industry in the United Kingdom Sports car manufacturers Defunct motor vehicle manufacturers of England Vehicle manufacture in London Vehicle manufacturing companies established in 1936 1936 establishments in England 1958 disestablishments in England Vehicle manufacturing companies disestablished in 1958 British companies disestablished in 1958 British companies established in 1936