The Aircore Cadet is an American

ultralight aircraft Ultralight aviation (called microlight aviation in some countries) is the flying of lightweight, 1- or 2-seat fixed-wing aircraft. Some countries differentiate between weight-shift control and conventional three-axis control aircraft with ailer ...

that was designed by

Jim Scott Jim or Jimmy Scott may refer to: Music * Jimmy Scott (1925–2014), American jazz vocalist * Jim Scott (producer), music engineer and producer * Jim Scott (musician), acoustic guitar player and songwriter * Jimmy Scott (songwriter), British-born mu ...

and produced by Aircore Industries in the early 1980s. The aircraft was supplied as a kit for amateur construction.Cliche, Andre: ''Ultralight Aircraft Shopper's Guide'' 8th Edition, page E-9. Cybair Limited Publishing, 2001.

Design and development

The Cadet was designed to comply with the US

FAR 103 Ultralight Vehicles Ultralight aircraft in the United States are much smaller and lighter than ultralight aircraft as defined by all other countries. In the United States, ultralights are described as "ultralight vehicles" and not as aircraft. They are not requ ...

rules, including the category's maximum empty weight of . The aircraft has a standard empty weight of . It features a

strut-braced In aeronautics, bracing comprises additional structural members which stiffen the functional airframe to give it rigidity and strength under load. Bracing may be applied both internally and externally, and may take the form of strut, which act in ...

high-wing A monoplane is a fixed-wing aircraft configuration with a single mainplane, in contrast to a biplane or other types of multiplanes, which have multiple planes. A monoplane has inherently the highest efficiency and lowest drag of any wing confi ...

, single-seat, open cockpit, single

tractor A tractor is an engineering vehicle specifically designed to deliver a high tractive effort (or torque) at slow speeds, for the purposes of hauling a trailer or machinery such as that used in agriculture, mining or construction. Most common ...

engine configuration, and is equipped with

tricycle landing gear Tricycle gear is a type of aircraft undercarriage, or ''landing gear'', arranged in a tricycle fashion. The tricycle arrangement has a single nose wheel in the front, and two or more main wheels slightly aft of the center of gravity. Tricycle g ...

. The aircraft is made from bolted together

aluminum Aluminium (aluminum in American and Canadian English) is a chemical element with the symbol Al and atomic number 13. Aluminium has a density lower than those of other common metals, at approximately one third that of steel. It has ...

tubing, with the wings and tail covered in

Dacron Polyethylene terephthalate (or poly(ethylene terephthalate), PET, PETE, or the obsolete PETP or PET-P), is the most common thermoplastic polymer resin of the polyester family and is used in fibres for clothing, containers for liquids and foods ...

sailcloth. Its span wing employs "V"

lift strut In aeronautics, bracing comprises additional structural members which stiffen the functional airframe to give it rigidity and strength under load. Bracing may be applied both internally and externally, and may take the form of strut, which act in ...

s and

jury strut In aeronautics, bracing comprises additional structural members which stiffen the functional airframe to give it rigidity and strength under load. Bracing may be applied both internally and externally, and may take the form of strut, which act in c ...

s. The aircraft keel is an aluminum tube that runs from the tail, mounts the wings and the engine at its forward end. The standard factory-supplied engine is the

Rotax 277 The Rotax 277 is a , single-cylinder, two-stroke aircraft engine, that was built by BRP-Rotax GmbH & Co. KG of Austria for use in ultralight aircraft.Raisner, William: ''LEAF catlog'', pages 6-105. Leading Edge Airfoils, 1995. Development The ...

, driving a diameter fixed-pitch propeller with a pitch. The pilot sits on an open seat without a windshield. The control system is conventional three-axis, with half-span

aileron An aileron (French for "little wing" or "fin") is a hinged flight control surface usually forming part of the trailing edge of each wing of a fixed-wing aircraft. Ailerons are used in pairs to control the aircraft in roll (or movement around ...

s. The main landing gear is sprung steel and the nosewheel incorporates steering. There is a small tail

caster A caster (or castor) is an undriven wheel that is designed to be attached to the bottom of a larger object (the "vehicle") to enable that object to be moved. Casters are used in numerous applications, including shopping carts, office chairs, t ...

to protect the tail. Brakes are optionally available. Reviewer Andre Cliche describes the Cadet as "a clean and simple design that is inexpensive to maintain."

Specifications (Cadet)

References

{{reflist

External links

Photo of an Aircore Cadet
1980s United States ultralight aircraft Homebuilt aircraft Single-engined tractor aircraft