Adaptive predictive coding (APC) is a

narrowband Narrowband signals are signals that occupy a narrow range of frequencies or that have a small fractional bandwidth. In the audio spectrum, narrowband sounds are sounds that occupy a narrow range of frequencies. In telephony, narrowband is usua ...

analog-to-digital conversion In electronics, an analog-to-digital converter (ADC, A/D, or A-to-D) is a system that converts an analog signal, such as a sound picked up by a microphone or light entering a digital camera, into a digital signal. An ADC may also provi ...

that uses a one-level or multilevel sampling system in which the value of the

signal In signal processing, a signal is a function that conveys information about a phenomenon. Any quantity that can vary over space or time can be used as a signal to share messages between observers. The ''IEEE Transactions on Signal Processing'' ...

at each sampling instant is predicted according to a linear function of the past values of the quantized signals. APC is related to

linear predictive coding Linear predictive coding (LPC) is a method used mostly in audio signal processing and speech processing for representing the spectral envelope of a digital signal of speech in compressed form, using the information of a linear predictive model. ...

(LPC) in that both use adaptive predictors. However, APC uses fewer prediction coefficients, thus requiring a higher

sampling rate In signal processing, sampling is the reduction of a continuous-time signal to a discrete-time signal. A common example is the conversion of a sound wave to a sequence of "samples". A sample is a value of the signal at a point in time and/or spac ...

than LPC.

References

Digital signal processing {{telecomm-stub