10-hour clock
   HOME

TheInfoList



OR:

Decimal time is the representation of the time of day using units which are
decimal The decimal numeral system (also called the base-ten positional numeral system and denary or decanary) is the standard system for denoting integer and non-integer numbers. It is the extension to non-integer numbers of the Hindu–Arabic numeral ...
ly related. This term is often used specifically to refer to the time system used in
France France (), officially the French Republic ( ), is a country primarily located in Western Europe. It also comprises of Overseas France, overseas regions and territories in the Americas and the Atlantic Ocean, Atlantic, Pacific Ocean, Pac ...
for a few years beginning in 1792 during the
French Revolution The French Revolution ( ) was a period of radical political and societal change in France that began with the Estates General of 1789 and ended with the formation of the French Consulate in November 1799. Many of its ideas are conside ...
, which divided the day into 10 decimal hours, each decimal hour into 100 decimal minutes and each decimal minute into 100 decimal seconds ( decimal seconds per day), as opposed to the more familiar UTC
time standard A time standard is a specification for measuring time: either the rate at which time passes or points in time or both. In modern times, several time specifications have been officially recognized as standards, where formerly they were matters o ...
, which divides the day into 24
hour An hour (symbol: h; also abbreviated hr) is a unit of time conventionally reckoned as of a day and scientifically reckoned between 3,599 and 3,601 seconds, depending on the speed of Earth's rotation. There are 60 minutes in an hour, and 24 ...
s, each hour into 60
minute The minute is a unit of time usually equal to (the first sexagesimal fraction) of an hour, or 60 seconds. In the UTC time standard, a minute on rare occasions has 61 seconds, a consequence of leap seconds (there is a provision to insert a neg ...
s and each minute into 60
second The second (symbol: s) is the unit of time in the International System of Units (SI), historically defined as of a day – this factor derived from the division of the day first into 24 hours, then to 60 minutes and finally to 60 seconds ea ...
s ( SI seconds per day). The main advantage of a decimal time system is that, since the base used to divide the time is the same as the one used to represent it, the representation of hours, minutes and seconds can be handled as a unified value. Therefore, it becomes simpler to interpret a timestamp and to perform conversions. For instance, 1:23:45 is 1 decimal hour and 23 decimal minutes and 45 decimal seconds, or 1.2345 decimal hours, or 123.45 decimal minutes or 12345 decimal seconds; 3 hours is 300 minutes or 30,000 seconds. This property also makes it straightforward to represent a timestamp as a fractional day, so that .54321 can be interpreted as five decimal hours and 43 decimal minutes and 21 decimal seconds after the start of that day, or a fraction of 0.54321 (54.321%) through that day (which is shortly after traditional 13:00). It also adjusts well to digital time representation using epochs, in that the internal time representation can be used directly both for computation and for user-facing display.


History


Egypt

The decans are 36 groups of stars (small constellations) used in the ancient Egyptian astronomy to conveniently divide the 360 degree ecliptic into 36 parts of 10 degrees. Because a new decan also appears heliacally every ten days (that is, every ten days, a new decanic star group reappears in the eastern sky at dawn right before the Sun rises, after a period of being obscured by the Sun's light), the ancient Greeks called them ''dekanoi'' (δεκανοί; pl. of δεκανός ''dekanos'') or "tens." A ten-day period between the rising of two consecutive decans is a decade. There were 36 decades (36 × 10 = 360 days), plus five added days to compose the 365 days of a solar based year.


China

Decimal time was used in China throughout most of its history alongside
duodecimal The duodecimal system (also known as base 12, dozenal, or, rarely, uncial) is a positional notation numeral system using twelve as its base. The number twelve (that is, the number written as "12" in the decimal numerical system) is instead wr ...
time. The midnight-to-midnight day was divided both into 12 double hours () and also into 10 shi / 100 ''ke'' () by the 1st millennium BC. Other numbers of ''ke'' per day were used during three short periods: 120 ''ke'' from 5 to 3 BC, 96 ''ke'' from 507 to 544 CE, and 108 ''ke'' from 544 to 565. Several of the roughly 50 Chinese calendars also divided each ''ke'' into 100 ''fen'', although others divided each ''ke'' into 60 ''fen''. In 1280, the ''Shoushi'' (Season Granting) calendar further subdivided each ''fen'' into 100 ''miao'', creating a complete decimal time system of 100 ''ke'', 100 ''fen'' and 100 ''miao''. Chinese decimal time ceased to be used in 1645 when the Shíxiàn calendar, based on European astronomy and brought to China by the
Jesuit , image = Ihs-logo.svg , image_size = 175px , caption = ChristogramOfficial seal of the Jesuits , abbreviation = SJ , nickname = Jesuits , formation = , founders ...
s, adopted 96 ''ke'' per day alongside 12 double hours, making each ''ke'' exactly one-quarter hour. Gēng (更) is a time signal given by drum or gong. The character for gēng 更, literally meaning "rotation" or "watch", comes from the rotation of watchmen sounding these signals. The first gēng theoretically comes at sundown, but was standardized to fall at 19:12. The time between each gēng is 1⁄10 of a day, making a gēng 2.4 hours—or 2 hours 24 minutes—long As a 10-part system, the gēng are strongly associated with the 10 celestial stems, especially since the stems are used to count off the gēng during the night in Chinese literature. As early as the Bronze-Age Xia dynasty, days were grouped into ten-day weeks known as xún (旬). Months consisted of three xún. The first 10 days were the early xún (上旬), the middle 10 the mid xún (中旬), and the last nine or 10 days were the late xún (下旬). Japan adopted this pattern, with 10-day-weeks known as jun (旬). In Korea, they were known as sun (순,旬).


France


Pre-Revolution

In 1754,
Jean le Rond d'Alembert Jean-Baptiste le Rond d'Alembert (; ; 16 November 1717 – 29 October 1783) was a French mathematician, mechanician, physicist, philosopher, and music theorist. Until 1759 he was, together with Denis Diderot, a co-editor of the '' Encyclopéd ...
wrote in the ''
Encyclopédie ''Encyclopédie, ou dictionnaire raisonné des sciences, des arts et des métiers'' (English: ''Encyclopedia, or a Systematic Dictionary of the Sciences, Arts, and Crafts''), better known as ''Encyclopédie'', was a general encyclopedia publis ...
'': :It would be very desirable that all divisions, for example of the ''livre'', the ''sou'', the ''toise'', the day, the hour, etc. would be from tens into tens. This division would result in much easier and more convenient calculations and would be very preferable to the arbitrary division of the ''livre'' into twenty ''sous'', of the ''sou'' into twelve ''deniers'', of the day into twenty-four hours, the hour into sixty minutes, etc. In 1788, Claude Boniface Collignon proposed dividing the day into 10 hours or 1,000 minutes, each new hour into 100 minutes, each new minute into 1,000 seconds, and each new second into 1,000 ''tierces'' (Latin for "third"). The distance the twilight zone travels in one such ''tierce'' at the
equator The equator is a circle of latitude, about in circumference, that divides Earth into the Northern and Southern hemispheres. It is an imaginary line located at 0 degrees latitude, halfway between the North and South poles. The term can also ...
, which would be one-billionth of the
circumference In geometry, the circumference (from Latin ''circumferens'', meaning "carrying around") is the perimeter of a circle or ellipse. That is, the circumference would be the arc length of the circle, as if it were opened up and straightened out ...
of the
earth Earth is the third planet from the Sun and the only astronomical object known to harbor life. While large volumes of water can be found throughout the Solar System, only Earth sustains liquid surface water. About 71% of Earth's sur ...
, would be a new unit of length, provisionally called a half- handbreadth, equal to four modern centimetres. Further, the new ''tierce'' would be divided into 1,000 ''quatierces'', which he called "microscopic points of time". He also suggested a week of 10 days and dividing the year into 10 "solar months".


French Republic

Decimal time was officially introduced during the
French Revolution The French Revolution ( ) was a period of radical political and societal change in France that began with the Estates General of 1789 and ended with the formation of the French Consulate in November 1799. Many of its ideas are conside ...
.
Jean-Charles de Borda Jean-Charles, chevalier de Borda (4 May 1733 – 19 February 1799) was a French mathematician, physicist, and Navy officer. Biography Borda was born in the city of Dax to Jean‐Antoine de Borda and Jeanne‐Marie Thérèse de Lacroix. In 1 ...
made a proposal for decimal time on 5 November 1792. The
National Convention The National Convention (french: link=no, Convention nationale) was the parliament of the Kingdom of France for one day and the French First Republic for the rest of its existence during the French Revolution, following the two-year Nation ...
issued a decree on 5 October 1793: :''XI. Le jour, de minuit à minuit, est divisé en dix parties, chaque partie en dix autres, ainsi de suite jusqu’à la plus petite portion commensurable de la durée.'' :XI. The day, from midnight to midnight, is divided into ten parts, each part into ten others, and so forth until the smallest measurable portion of duration. These parts were named on 24 November 1793 (4
Frimaire Frimaire () was the third month in the French Republican Calendar. The month was named after the French word ''frimas'', which means ''frost''. Frimaire was the third month of the autumn quarter (''mois d'automne''). It started between 21 Novemb ...
of the Year II). The primary divisions were called hours, and they added: :''La centième partie de l'heure est appelée ''minute décimale''; la centième partie de la minute est appelée ''seconde décimale''. ''(emphasis in original) :The hundredth part of the hour is called ''decimal minute''; the hundredth part of the minute is called ''decimal second''. Thus, midnight was called either ''dix heures'' ("ten hours") or ''zéro heures'', noon was called ''cinq heures'' ("five hours"), etc.


Representation

The colon (:) was not yet in use as a unit separator for standard times. Units were either written out in full, or abbreviated. Thus, five hours eighty three minutes decimal might be written as 5 h. 83 m. Even today, "h" is commonly used is France to separate hours and minutes of 24-hour time, instead of a colon, such as 14h00. As with duodecimal time, decimal time was represented according to true solar time, rather than mean time, with noon being marked when the sun reached its highest point locally, which varied at different locations, and throughout the year. Sometimes in official records, decimal hours were divided into tenths, or ''décimes'', instead of minutes. One ''décime'' is equal to 10 decimal minutes, which is nearly equal to a quarter-hour (15 minutes) in standard time. Thus, "five hours two décimes" equals 5.2 decimal hours, roughly 12:30 p.m. in standard time.


Usage

Although
clock A clock or a timepiece is a device used to measure and indicate time. The clock is one of the oldest human inventions, meeting the need to measure intervals of time shorter than the natural units such as the day, the lunar month and ...
s and
watch A watch is a portable timepiece intended to be carried or worn by a person. It is designed to keep a consistent movement despite the motions caused by the person's activities. A wristwatch is designed to be worn around the wrist, attached ...
es were produced with faces showing both standard time with numbers 1–24 and decimal time with numbers 1–10, decimal time never caught on; it was not officially used until the beginning of the Republican year III, 22 September 1794, and mandatory use was suspended 7 April 1795 (18 Germinal of the Year III), in the same law which introduced the original
metric system The metric system is a system of measurement that succeeded the decimalised system based on the metre that had been introduced in France in the 1790s. The historical development of these systems culminated in the definition of the Intern ...
, although decimal time continued to be used for several years in some places. Thus, although decimal time is sometimes referred to as metric time, the metric system at first had no time unit, and later versions of the metric system used the second, equal to 1/86,400 day, as the metric time unit. In spite of this, decimal time was used in many cities, including
Marseille Marseille ( , , ; also spelled in English as Marseilles; oc, Marselha ) is the prefecture of the French department of Bouches-du-Rhône and capital of the Provence-Alpes-Côte d'Azur region. Situated in the camargue region of southern Fra ...
and
Toulouse Toulouse ( , ; oc, Tolosa ) is the prefecture of the French department of Haute-Garonne and of the larger region of Occitania. The city is on the banks of the River Garonne, from the Mediterranean Sea, from the Atlantic Ocean and fr ...
, where a decimal clock with just an hour hand was on the front of the Capitole for five years. In Marseille, decimal time was used to record civil acts until 1800. On the Palace of the Tuileries in
Paris Paris () is the capital and most populous city of France, with an estimated population of 2,165,423 residents in 2019 in an area of more than 105 km² (41 sq mi), making it the 30th most densely populated city in the world in 2020. Si ...
, two of the four clock faces displayed decimal time until at least 1801. The mathematician and astronomer
Pierre-Simon Laplace Pierre-Simon, marquis de Laplace (; ; 23 March 1749 – 5 March 1827) was a French scholar and polymath whose work was important to the development of engineering, mathematics, statistics, physics, astronomy, and philosophy. He summarize ...
had a decimal watch made for him, and used decimal time in his work, in the form of fractional days. Decimal time was part of a larger attempt at
decimal The decimal numeral system (also called the base-ten positional numeral system and denary or decanary) is the standard system for denoting integer and non-integer numbers. It is the extension to non-integer numbers of the Hindu–Arabic numeral ...
isation in revolutionary France (which also included decimalisation of currency and metrication) and was introduced as part of the French Republican Calendar, which, in addition to decimally dividing the day, divided the month into three ''décades'' of 10 days each; this calendar was abolished at the end of 1805. The start of each year was determined according to the day of the autumnal equinox, in relation to true or apparent solar time at the
Paris Observatory The Paris Observatory (french: Observatoire de Paris ), a research institution of the Paris Sciences et Lettres University, is the foremost astronomical observatory of France, and one of the largest astronomical centers in the world. Its histo ...
.


Later Proposals

On March 28, 1794,
Joseph-Louis Lagrange Joseph-Louis Lagrange (born Giuseppe Luigi Lagrangia At the International Meridian Conference of 1884, the following resolution was proposed by the French delegation and passed nem con (with 3 abstentions): :VII. That the Conference expresses the hope that the technical studies designed to regulate and extend the application of the decimal system to the division of angular space and of time shall be resumed, so as to permit the extension of this application to all cases in which it presents real advantages. In the 1890s, Joseph Charles François de Rey-Pailhade, president of the Toulouse Geographical Society, proposed dividing the day into 100 parts, called ''cés'', equal to 14.4 standard minutes, and each divided into 10 ''decicés'', 100 ''centicés'', etc. The Toulouse Chamber of Commerce adopted a resolution supporting his proposal in April 1897. Although widely published, the proposal received little backing. The French made another attempt at the decimalization of time in 1897, when the ''Commission de décimalisation du temps'' was created by the
Bureau des Longitudes Bureau ( ) may refer to: Agencies and organizations * Government agency *Public administration * News bureau, an office for gathering or distributing news, generally for a given geographical location * Bureau (European Parliament), the administ ...
, with the mathematician
Henri Poincaré Jules Henri Poincaré ( S: stress final syllable ; 29 April 1854 – 17 July 1912) was a French mathematician, theoretical physicist, engineer, and philosopher of science. He is often described as a polymath, and in mathematics as "Th ...
as secretary. The commission adopted a compromise, originally proposed by Henri de Sarrauton of the Oran Geographical Society, of retaining the 24-hour day, but dividing each hour into 100 decimal minutes, and each minute into 100 seconds. The plan did not gain acceptance and was abandoned in 1900.


Switzerland

On 23 October 1998, the
Swiss watch Swiss made is a label or marking used to indicate that a product was made on the territory of Switzerland. It is also a geographical indication protected under different Swiss and international laws and treaties. According to the Swiss Federal Ac ...
company Swatch introduced a decimal time called Internet Time, which divides the day into 1,000 decimal minutes (Swatch called them ''.beats''), (each 86.4 seconds in standard time) counted from 000–999, with @000 being midnight and @500 being noon
standard time Standard time is the synchronisation of clocks within a geographical region to a single time standard, rather than a local mean time standard. Generally, standard time agrees with the local mean time at some meridian that passes through the ...
in
Switzerland ). Swiss law does not designate a ''capital'' as such, but the federal parliament and government are installed in Bern, while other federal institutions, such as the federal courts, are in other cities (Bellinzona, Lausanne, Luzern, Neuchâtel ...
, which is
Central European Time Central European Time (CET) is a standard time which is 1 hour ahead of Coordinated Universal Time (UTC). The time offset from UTC can be written as UTC+01:00. It is used in most parts of Europe and in a few North African countries. CE ...
(one hour ahead of
Universal Time Universal Time (UT or UT1) is a time standard based on Earth's rotation. While originally it was mean solar time at 0° longitude, precise measurements of the Sun are difficult. Therefore, UT1 is computed from a measure of the Earth's angle wit ...
). A line painted on Swatch headquarters in the Swiss city of Biel (now Biel/Bienne) was declared to mark the Biel Meridian, and Central European Time was relabelled as "Biel Meantime", even though it does not correspond to
local mean time Local mean time (LMT) is a form of solar time that corrects the variations of local apparent time, forming a uniform time scale at a specific longitude. This measurement of time was used for everyday use during the 19th century before time zone ...
in Biel.


Conversions

There are exactly 86,400 standard seconds (see SI for the current definition of the standard second) in a standard day, but in the French decimal time system there were 100,000 decimal seconds in the day; thus, the decimal second was 13.6% shorter than its standard counterpart.


Decimal hours

Another common type of decimal time is decimal hours. In 1896, Henri de Sarrauton of the Oran Geographical Society proposed dividing the 24 hours of the day each into 100 decimal minutes, and each minute into 100 decimal seconds. Although endorsed by the Bureau des Longitudes, this proposal failed, but using decimal fractions of an hour to represent the time of day instead of minutes has become common. Decimal hours are frequently used in accounting for payrolls and hourly billing.
Time clock A time clock, sometimes known as a clock card machine or punch clock or time recorder, is a device that records start and end times for hourly employees (or those on flexi-time) at a place of business. In mechanical time clocks, this was accomp ...
s typically record the time of day in tenths or hundredths of an hour. For instance, 08:30 would be recorded as 08.50. This is intended to make accounting easier by eliminating the need to convert between minutes and hours. For aviation purposes, where it is common to add times in an already complicated environment, time tracking is simplified by recording decimal fractions of hours. For instance, instead of adding 1:36 to 2:36, getting 3:72 and converting it to 4:12, one would add 1.6 to 2.6 and get 4.2 hours.


Fractional days

The time of day is sometimes represented as a decimal fraction of a day in science and computers. Standard 24-hour time is converted into a fractional day by dividing the number of hours elapsed since midnight by 24 to make a decimal fraction. Thus, midnight is 0.0 day, noon is 0.5 d, etc., which can be added to any type of date, including (all of which refer to the same moment): * Gregorian dates: 2000 January 1.5 *
Two-line elements A two-line element set (TLE) is a data format encoding a list of orbital elements of an Earth-orbiting object for a given point in time, the ''epoch''. Using a suitable prediction formula, the state (position and velocity) at any point in the past ...
: 00001.50000000 * Julian dates: 2451545.0 * Excel serial dates: 36526.5 As many decimal places may be used as required for precision, so 0.5 d = 0.500000 d. Fractional days are often calculated in UTC or TT, although Julian Dates use pre-1925 astronomical date/time (each date began at noon = ".0") and
Microsoft Excel Microsoft Excel is a spreadsheet developed by Microsoft for Microsoft Windows, Windows, macOS, Android (operating system), Android and iOS. It features calculation or computation capabilities, graphing tools, pivot tables, and a macro (comp ...
uses the local time zone of the computer. Using fractional days reduces the number of units in time calculations from four (days, hours, minutes, seconds) to just one (days). Fractional days are often used by
astronomer An astronomer is a scientist in the field of astronomy who focuses their studies on a specific question or field outside the scope of Earth. They observe astronomical objects such as stars, planets, moons, comets and galaxies – in either ...
s to record observations, and were expressed in relation to Paris Mean Time by the 18th century French mathematician and astronomer
Pierre-Simon Laplace Pierre-Simon, marquis de Laplace (; ; 23 March 1749 – 5 March 1827) was a French scholar and polymath whose work was important to the development of engineering, mathematics, statistics, physics, astronomy, and philosophy. He summarize ...
, as in these examples: Fractional days have been used by astronomers ever since. For instance, the 19th century British astronomer
John Herschel Sir John Frederick William Herschel, 1st Baronet (; 7 March 1792 – 11 May 1871) was an English polymath active as a mathematician, astronomer, chemist, inventor, experimental photographer who invented the blueprint and did botanical wo ...
gave these examples: Fractional days are commonly used to express
epoch In chronology and periodization, an epoch or reference epoch is an instant in time chosen as the origin of a particular calendar era. The "epoch" serves as a reference point from which time is measured. The moment of epoch is usually decided ...
s of
orbital elements Orbital elements are the parameters required to uniquely identify a specific orbit. In celestial mechanics these elements are considered in two-body systems using a Kepler orbit. There are many different ways to mathematically describe the same ...
. The decimal fraction is usually added to the calendar date or
Julian day The Julian day is the continuous count of days since the beginning of the Julian period, and is used primarily by astronomers, and in software for easily calculating elapsed days between two events (e.g. food production date and sell by date). ...
for natural objects, or to the
ordinal date An ordinal date is a calendar date typically consisting of a ''year'' and a day of the year or ordinal day number (or simply ordinal day or day number), an ordinal number ranging between 1 and 366 (starting on January 1), though year may sometime ...
for artificial satellites in
two-line elements A two-line element set (TLE) is a data format encoding a list of orbital elements of an Earth-orbiting object for a given point in time, the ''epoch''. Using a suitable prediction formula, the state (position and velocity) at any point in the past ...
.


Decimal multiples and fractions of the second

The second is the
International System of Units (SI) The International System of Units, known by the international abbreviation SI in all languages and sometimes pleonastically as the SI system, is the modern form of the metric system and the world's most widely used system of measurement. E ...
unit of time duration. It is also the standard single-unit time representation in many programming languages, most notably C, and part of UNIX/POSIX standards used by Linux, Mac OS X, etc.; to convert fractional days to fractional seconds, multiply the number by 86400. Fractional seconds are represented as
millisecond A millisecond (from '' milli-'' and second; symbol: ms) is a unit of time in the International System of Units (SI) equal to one thousandth (0.001 or 10−3 or 1/1000) of a second and to 1000 microseconds. A unit of 10 milliseconds may be calle ...
s (ms), microseconds (μs) or nanoseconds (ns). Absolute times are usually represented relative to 1 January 1970, at midnight UT. Other systems may use a different zero point (like
Unix time Current Unix time () Unix time is a date and time representation widely used in computing. It measures time by the number of seconds that have elapsed since 00:00:00 UTC on 1 January 1970, the beginning of the Unix epoch, less adjustments m ...
). In principle, time spans greater than one second may be given in units such as kiloseconds (ks),
megasecond The second (symbol: s) is the unit of time in the International System of Units (SI), historically defined as of a day – this factor derived from the division of the day first into 24 hours, then to 60 minutes and finally to 60 seconds each ...
s (Ms), gigaseconds (Gs), and so on. Occasionally, these units can be found in technical literature, but traditional units like minutes, hours, days and years are much more common, and are accepted for use with SI. It is possible to specify the time of day as the number of kiloseconds of elapsed time since midnight. Thus, instead of saying 3:45 p.m. one could say (time of day) 56.7 ks. There are exactly 86.4 ks in one day. However, this nomenclature is rarely used in practice.


Scientific decimal time

Scientists often record time as decimal. For example, decimal days divide the day into 10 equal parts, and decimal years divide the year into 10 equal parts. Decimals are easier to plot than both (a) minutes and seconds, which uses the
sexagesimal Sexagesimal, also known as base 60 or sexagenary, is a numeral system with sixty as its base. It originated with the ancient Sumerians in the 3rd millennium BC, was passed down to the ancient Babylonians, and is still used—in a modified form ...
numbering system, (b) hours, months and days, which has irregular month lengths. In astronomy, the so-called
Julian day The Julian day is the continuous count of days since the beginning of the Julian period, and is used primarily by astronomers, and in software for easily calculating elapsed days between two events (e.g. food production date and sell by date). ...
uses decimal days centered on Greenwich noon. ;Seconds in a decimal minute Since there are 60 seconds in a minute, a tenth part represents = 6 seconds. ;Minutes in a decimal hour Since there are 60 minutes in an hour, a tenth part represents = 6 minutes. ;Hours in a decimal day Since there are 24 hours in a day, a tenth part represents = 2.4 hours (2 hours and 24 minutes). ;Length of a decimal year Since there are about 365 days in a year, there are about = 36.5 days in a tenth of a year. Hence the year 2020.5 represents the day 2 July 2020. More exactly, a “Julian year” is exactly 365.25 days long, so a tenth of the year is 36.525 days (36 days, 12 hours, 36 minutes). These values, based on the Julian year, are most likely to be those used in astronomy and related sciences. A
Gregorian year Gregorian may refer to: *The thought or ideology of Pope Gregory I or Pope Gregory VII (also called ''Gregorianism'') *Things named for Pope Gregory I: **Gregorian chant, the central tradition of Western plainchant, a form of monophonic, unaccom ...
, which takes into account the 100 vs. 400 leap year exception rule of the
Gregorian calendar The Gregorian calendar is the calendar used in most parts of the world. It was introduced in October 1582 by Pope Gregory XIII as a modification of, and replacement for, the Julian calendar. The principal change was to space leap years d ...
, is 365.2425 days (the average length of a year over a 400–year cycle), resulting in 0.1 years being a period of 36.52425 days ( seconds; 36 days, 12 hours, 34 minutes, 55.2 seconds).


Other decimal times

Numerous individuals have proposed variations of decimal time, dividing the day into different numbers of units and subunits with different names. Most are based upon fractional days, so that one decimal time format may be easily converted into another, such that all the following are equivalent: * 0.500 day * 5 heures décimales * @500.beats
Swatch Internet Time Swatch Internet Time (or ) is a decimal time concept introduced in 1998 by the Swatch corporation as part of their marketing campaign for their line of "Beat" watches. Instead of hours and minutes, the mean solar day is divided into 1,000 parts ...
( see above) * 50.0 ''kes'' or ''cés'' (centidays) * 500 millidays * 50.0% time as a percentage of the day * 12:00 standard time Some decimal time proposals are based upon alternate units of metric time. The difference between metric time and decimal time is that metric time defines units for measuring time interval, as measured with a
stopwatch A stopwatch is a timepiece designed to measure the amount of time that elapses between its activation and deactivation. A large digital version of a stopwatch designed for viewing at a distance, as in a sports stadium, is called a stop clock. ...
, and decimal time defines the time of day, as measured by a clock. Just as standard time uses the metric time unit of the second as its basis, proposed decimal time scales may use alternative metric units.


See also

* 12-hour clock *
24-hour clock The modern 24-hour clock, popularly referred to in the United States as military time, is the convention of timekeeping in which the day runs from midnight to midnight and is divided into 24 hours. This is indicated by the hours (and minutes) pa ...
*
Centesimal minute and second of arc In trigonometry, the gradian, also known as the gon (from grc, γωνία, gōnía, angle), grad, or grade, is a unit of measurement of an angle, defined as one hundredth of the right angle; in other words, there are 100 gradians in 90 degr ...
* Decimal calendar * Hexadecimal time *
List of unusual units of measurement An unusual unit of measurement is a unit of measurement that does not form part of a coherent system of measurement, especially because its exact quantity may not be well known or because it may be an inconvenient multiple or fraction of a bas ...
* Metric time * Stardate *
Unix time Current Unix time () Unix time is a date and time representation widely used in computing. It measures time by the number of seconds that have elapsed since 00:00:00 UTC on 1 January 1970, the beginning of the Unix epoch, less adjustments m ...


References


Notes


Sources

* National Convention of the French Republic (1793
LE CALENDRIER RÉPUBLICAIN Textes officiels Décrets Relatifs à l'établissement de l'Ère Républicaine
published by Philippe Chapelin 2002 * Sizes, Inc. (2000

Last revised 27 February 2004 * Herschel, John (1849)
Outlines of Astronomy
' published by Gallica 1995


External links


Decimal Time by Kevin Gut - Website that shows the current decimal time and a converter to and from decimal time

Metric Clock by Paul Dunning / Shows the current local decimal time

Decimal Time Clock & Calendar
{{DEFAULTSORT:Decimal Time Time measurement systems Metrication Metrication in France
Time Time is the continued sequence of existence and event (philosophy), events that occurs in an apparently irreversible process, irreversible succession from the past, through the present, into the future. It is a component quantity of various me ...
Time in astronomy Units of time