A rope is a group of yarn
s or strands that are twisted or braid
ed together into a larger and stronger form. Ropes have tensile strength
and so can be used for dragging and lifting. Rope is thicker and stronger than similarly constructed cord, string
, and twine
Rope may be constructed of any long, stringy, fibrous material, but generally is constructed of certain natural
Synthetic fibre ropes are significantly stronger than their natural fibre counterparts, they have a higher tensile strength
, they are more resistant to rotting than ropes created from natural fibers, and they can be made to float on water.
But synthetic rope also possess certain disadvantages, including slipperiness, and some can be damaged more easily by UV light
Common natural fibres for rope are manila hemp
, and sisal
. Synthetic fibres in use for rope-making include polypropylene
s (e.g. PET
(e.g. Dyneema and Spectra
s (e.g. Twaron
) and acrylics
). Some ropes are constructed of mixtures of several fibres or use co-polymer fibres. Wire rope
is made of steel or other metal alloys. Ropes have been constructed of other fibrous materials such as silk
, and hair, but such ropes are not generally available. Rayon
is a regenerated fibre used to make decorative rope.
The twist of the strands in a twisted or braided rope serves not only to keep a rope together, but enables the rope to more evenly distribute tension among the individual strands. Without any twist in the rope, the shortest strand(s) would always be supporting a much higher proportion of the total load.
The long history of rope means that many systems have been used to state the size of a rope. In systems that use the "inch" (British Imperial and United States Customary Measure), large ropes over diameter such as are used on ships are measured by their circumference in inches; smaller ropes have a nominal diameter based on the circumference divided by three (rounded-down value for pi). In metric systems of measurement, nominal diameter is given in millimetres. The current preferred international standard for rope sizes is to give the mass per unit length, in kilograms per metre. However, even sources otherwise using metric units may still give a "rope number" for large ropes, which is the circumference in inches.
Rope has been used since prehistoric
times. It is of paramount importance in fields as diverse as construction
, exploration, sports, theatre, and communications. Many types of knot
s have been developed to fasten with rope, join ropes, and utilize rope to generate mechanical advantage
s can redirect the pulling force of a rope in another direction, multiply its lifting or pulling power, and distribute a load over multiple parts of the same rope to increase safety and decrease wear.
es and capstans
are machines designed to pull ropes.
Rock climbing ropes
The sport of rock climbing
uses what is termed "dynamic" rope
, an elastic rope which stretches under load to absorb the energy generated in arresting a fall
without creating forces high enough to injure the climber. Such ropes are of kernmantle
construction, as described below
Oppositely, "static" ropes
have minimal stretch and are not designed to arrest free falls. They are used in caving, rappelling, rescue applications, and industries such as window washing.
, in concert with the CEN
, sets climbing-rope standards and oversees testing. Any rope bearing a GUIANA or CE certification tag is suitable for climbing. Climbing ropes cut easily when under load. Keeping them away from sharp rock edges is imperative. Previous falls arrested by a rope, damage to its sheath, and contamination by dirt or solvents all weaken a rope and can render it unsuitable for further sport use.
Rock climbing ropes are designated as suitable for single, double or twin use. A single rope is the most common, and is intended to be used by itself. These range in thickness from roughly 9 mm to 11 mm. Smaller diameter ropes are lighter, but wear out faster.
Double ropes are thinner than single, usually 9 mm and under, and are intended for use in pairs. These offer a greater margin of safety against cutting, since it is unlikely that both ropes will be cut, but complicate both belaying
and leading. Double ropes may be clipped into alternating pieces of protection, allowing each to stay straighter and reduce Both individual and totalrope drag.
Twin ropes are thin ropes which must be clipped into the same piece of protection, in effect being treated as a single strand. This adds security in situations where a rope may get cut. However new lighter-weight ropes with greater safety have virtually replaced this type of rope.
and alpine coils
are methods of coiling a rope for carrying.
The use of ropes for hunting, pulling, fastening, attaching, carrying, lifting, and climbing dates back to prehistoric
times. It is likely that the earliest "ropes" were naturally occurring lengths of plant fibre, such as vines, followed soon by the first attempts at twisting and braiding these strands together to form the first proper ropes in the modern sense of the word.
The earliest evidence of true rope making is a very small fragment of three-ply cord from a Neanderthal site dated 50,000 years ago. Later impressions of cordage found on fired clay
provide evidence of string and rope-making technology in Europe dating back 28,000 years.
ized fragments of "probably two-ply laid rope of about 7 mm diameter" were found in one of the caves at Lascaux
, dating to approximately 15,000 BC
[J.C. Turner and P. van de Griend (ed.), ''The History and Science of Knots'' (Singapore: World Scientific, 1996), 14.]
The ancient Egypt
ians were probably the first civilization to develop special tools to make rope. Egyptian rope dates back to 4000 to 3500 BC and was generally made of water reed fibres. Other rope in antiquity was made from the fibres of date palm
, or animal hair. The use of such ropes pulled by thousands of workers allowed the Egyptians
to move the heavy stones required to build their monuments. Starting from approximately 2800 BC, rope made of hemp
fibres was in use in China. Rope and the craft of rope making spread throughout Asia, India, and Europe over the next several thousand years.
From the Middle Ages until the 18th century, in Europe ropes were constructed in ropewalk
s, very long buildings where strands the full length of the rope were spread out and then ''laid up'' or twisted together to form the rope. The cable length was thus set by the length of the available rope walk. This is related to the unit of length termed ''cable length
''. This allowed for long ropes of up to 300 yards long or longer to be made. These long ropes were necessary in shipping as short ropes would require splicing
to make them long enough to use for sheets
. The strongest form of splicing is the short splice, which doubles the cross-sectional area of the rope at the area of the splice, which would cause problems in running the line through pulleys. Any splices narrow enough to maintain smooth running would be less able to support the required weight.
Leonardo da Vinci
drew sketches of a concept for a ropemaking machine, but it was never built. Remarkable feats of construction were accomplished using rope but without advanced technology: In 1586, Domenico Fontana
erected the 327 ton obelisk
on Rome's Saint Peter's Square
with a concerted effort of 900 men, 75 horses, and countless pulleys and meters of rope. By the late 18th century several working machines had been built and patented.
Some rope is still made from natural fibre
s, such as coir
, despite the dominance of synthetic fibre
s such as nylon
, which have become increasingly popular since the 1950s.
Mendel I 016 r.jpg|A ropemaker at work,
German Ropemaker, around 1460-1480.png|A German ropemaker,
Turku Medieval Markets, twisting rope.jpg|Public demonstration of historical ropemaking technique
MaryRose-rope fragment.JPG|A piece of preserved rope found on board the 16th century carrack ''Mary Rose''
Repslagarbanan 1-Karlskrona.JPG|A ropewalk in Karlskrona, Sweden
Styles of rope construction
Laid or twisted rope
Laid rope, also called twisted rope, is historically the prevalent form of rope, at least in modern Western
history. Common twisted rope generally consists of three strands and is normally right-laid, or given a final right-handed twist. The ISO 2
standard uses the uppercase letters
S and Z to indicate the two possible directions of twist, as suggested by the direction of slant of the central portions of these two letters. The handedness
of the twist is the direction of the twists as they progress away from an observer. Thus Z-twist rope is said to be right-handed
, and S-twist to be left-handed.
Twisted ropes are built up in three steps. First, fibre
s are gathered and spun
s. A number of these yarns are then formed into strands by twisting. The strands are then twisted together to lay the rope. The twist of the yarn is opposite to that of the strand, and that in turn is opposite to that of the rope. It is this counter-twist, introduced with each successive operation, which holds the final rope together as a stable, unified object.
Traditionally, a three strand laid rope is called a ''plain-'' or ''hawser
-laid'', a four strand rope is called ''shroud-laid'', and a larger rope formed by counter-twisting three or more multi-strand ropes together is called ''cable-laid''.
Cable-laid rope is sometimes clamped to maintain a tight counter-twist rendering the resulting cable
virtually waterproof. Without this feature, deep water sailing (before the advent of steel chains and other lines) was largely impossible, as any appreciable length of rope for anchoring or ship to ship transfers, would become too waterlogged – and therefore too heavy – to lift, even with the aid of a capstan or windlass.
One property of laid rope is partial untwisting when used. This can cause spinning of suspended loads, or stretching
, or hockling
of the rope itself. An additional drawback of twisted construction is that every fibre is exposed to abrasion numerous times along the length of the rope. This means that the rope can degrade to numerous inch-long fibre fragments, which is not easily detected visually.
Twisted ropes have a preferred direction for coiling. Normal right-laid rope should be coiled clockwise, to prevent kinking. Coiling this way imparts a twist to the rope. Rope of this type must be bound
at its ends by some means to prevent untwisting.
While rope may be made from three or more strands, modern braided rope consists of a braided (tubular) jacket over strands of fiber (these may also be braided). Some forms of braided rope with untwisted cores have a particular advantage; they do not impart an additional twisting force when they are stressed. The lack of added twisting forces is an advantage when a load is freely suspended, as when a rope is used for rappelling
or to suspend an arborist
. Other specialized cores reduce the shock from arresting a fall when used as a part of a personal or group safety system.
ed ropes are generally made from nylon
or high performance fibers such as high modulus polyethylene
(HMPE) and aramid. Nylon is chosen for its strength and elastic stretch properties. However, nylon absorbs water and is 10–15% weaker when wet. Polyester is about 90% as strong as nylon but stretches less under load and is not affected by water. It has somewhat better UV resistance, and is more abrasion resistant. Polypropylene is preferred for low cost and light weight (it floats on water) but it has limited resistance to ultraviolet
light, is susceptible to friction and has a poor heat resistance.
Braided ropes (and objects like garden hoses
, fibre optic
cables, etc.) that have no ''lay'' (or inherent twist) uncoil better if each alternate loop is twisted in the opposite direction, such as in figure-eight coils, where the twist reverses regularly and essentially cancels out.
Single braid consists of an even number of strands, eight or twelve being typical, braided into a circular pattern with half of the strands going clockwise and the other half going anticlockwise. The strands can interlock with either twill
or plain weave
. The central void may be large or small; in the former case the term hollow braid is sometimes preferred.
Double braid, also called braid on braid, consists of an inner braid filling the central void in an outer braid, that may be of the same or different material. Often the inner braid fibre is chosen for strength while the outer braid fibre is chosen for abrasion resistance.
In solid braid, the strands all travel the same direction, clockwise or anticlockwise, and alternate between forming the outside of the rope and the interior of the rope. This construction is popular for general purpose utility rope but rare in specialized high performance line.
rope has a core (kern) of long twisted fibres in the center, with a braided outer sheath or mantle of woven
fibres. The kern provides most of the strength (about 70%), while the mantle protects the kern and determines the handling properties of the rope (how easy it is to hold, to tie knots in, and so on). In dynamic climbing line
, core fibres are usually twisted, and chopped into shorter lengths, which makes the rope more elastic. Static kernmantle ropes are made with untwisted core fibres and tighter braid, which causes them to be stiffer in addition to limiting the stretch.
Plaited rope is made by braiding twisted strands, and is also called ''square braid''. It is not as round as twisted rope and coarser to the touch. It is less prone to kinking than twisted rope and, depending on the material, very flexible and therefore easy to handle and knot. This construction exposes all fibres as well, with the same drawbacks as described above. Brait rope is a combination of braided and plaited, a non-rotating alternative to laid three-strand ropes. Due to its excellent energy-absorption characteristics, it is often used by arborist
s. It is also a popular rope for anchoring and can be used as mooring warps. This type of construction was pioneered by Yale Cordage.
Endless winding rope is made by winding single strands of high-performance yarns around two end terminations until the desired break strength or stiffness has been reached. This type of rope (often specified as cable to make the difference between a braided or twined construction) has the advantage of having no construction stretch as is the case with above constructions. Endless winding is pioneered by SmartRigging and FibreMax.
Gallery of µCT/micro-CT images and animations
2D images / sections
Micro-CT braided polymer rope 2D top view.jpg
Micro-CT braided polymer rope 2D top view zoom.jpg
Micro-CT braided polymer rope 2D lateral view.jpg
Micro-CT braided polymer rope 2D lateral view 2.jpg
Micro-CT Rope HighRes 2D Top 2050x2050.ogv
Micro-CT 2D top view flight-through of a braided polymer climbing rope Zoom.ogg
Micro-CT Rope HighRes 2D Right 2560x550 750f 25fps.ogv
Micro-CT Rope HighRes 2D Rotation 2560x550 750f 25fps.ogv
Micro-CT braided polymer rope 3D 02.jpg
Micro-CT braided polymer rope 3D 03.jpg
Micro-CT braided polymer rope 3D 05.jpg
Micro-CT braided polymer rope 3D 07.jpg
Micro-CT braided polymer rope 3D 08.jpg
Micro-CT braided polymer rope 3D 10.jpg
Micro-CT braided polymer rope 3D 11.jpg
Micro-CT Rope HighRes 3D.ogv
Rope made from hemp
, cotton or nylon is generally stored in a cool dry place for proper storage. To prevent kinking it is usually coiled. To prevent fraying or unravelling, the ends of a rope are bound with twine (whipping
), tape, or heat shrink tubing. The ends of plastic fibre ropes are often melted and fused solid; however, the rope and knotting expert Geoffrey Budworth
warns against this practice thus:
''Sealing rope ends this way is lazy and dangerous.'' A tugboat operator once sliced the palm of his hand open down to the sinews after the hardened (and obviously ''sharp'') end of a rope that had been heat-sealed pulled through his grasp. There is no substitute for a properly made whipping.
If a load-bearing rope gets a sharp or sudden jolt or the rope shows signs of deteriorating, it is recommended that the rope be replaced immediately and should be discarded or only used for non-load-bearing tasks.
The average rope life-span is 5 years. Serious inspection should be given to line after that point. However, the use to which a rope is put affects frequency of inspection. Rope used in mission-critical
applications, such as mooring lines or running rigging
, should be regularly inspected on a much shorter timescale than this, and rope used in life-critical
applications such as mountain climbing should be inspected on a far more frequent basis, up to and including before each use.
Avoid stepping on climbing rope, as this might force tiny pieces of rock through the sheath, which can eventually deteriorate the core of the rope.
Ropes may be flemished into coils on deck for safety, presentation, and tidiness.
Many types of filaments in ropes are weakened by corrosive liquids, solvents, and high temperatures. Such damage is particularly treacherous because it often invisible to the eye.
Shock loading should be avoided with general use ropes, as it can damage them.
All ropes should be used within a safe working load, which is much less than their breaking strength.
A rope under tension – particularly if it has a great deal of elasticity – can be dangerous if parted. Care should be taken around lines under load.
"Rope" is a material, and a tool. When it is assigned a specific function it is often referred to as a "line", especially in nautical usage. A line may get a further distinction, for example sail control lines are known as “sheets” (e.g. A jib sheet
is a line used to raise and lower a sail, typically with a shackle
on its sail end. Other maritime examples of “lines” include anchor
line, mooring line
, fishing line
, . Common items include clothesline
and a chalk line
In some marine uses the term rope is retained, such as man rope, bolt rope, and bell rope.
* (splicing tool)
* , 2009
* Mooring line materials
* (in theatre fly system)
* Gaitzsch, W. ''Antike Korb- und Seilerwaren'', Schriften des Limesmuseums Aalen Nr. 38, 1986
* Gubser, T. ''Die bäuerliche Seilerei'', G. Krebs AG, Basel, 1965
* Hearle, John W. S. & O'Hear & McKenna, N. H. A. ''Handbook of Fibre Rope Technology'', CRC Press, 2004
* Lane, Frederic Chapin, 1932. ''The Rope Factory and Hemp Trade of Venice in the Fifteenth and Sixteenth Centuries'', Journal of Economic and Business History, Vol. 4 No. 4 Suppl. (August 1932).
* Militzer-Schwenger, L.: ''Handwerkliche Seilherstellung'', Landschaftsverband Westfalen-Lippe, 1992
* Nilson, A. ''Studier i svenskt repslageri'', Stockholm, 1961
* Pierer, H.A. ''Universal-Lexikon'', Altenburg, 1845
* Plymouth Cordage Company, 1931. ''The Story of Rope; The History and the Modern Development of Rope-Making'', Plymouth Cordage Company, North Plymouth, Massachusetts
* Sanctuary, Anthony, 1996.'' Rope, Twine and Net Making'', Shire Publications Ltd., Cromwell House, Princes Risborough, Buckinghamshire.
* Schubert, Pit. ''Sicherheit und Risiko in Fels und Eis'', Munich, 1998
* Smith, Bruce & Padgett, Allen, 1996. ''On Rope. North American Vertical Rope Techniques'', National Speleological Society, Huntsville, Alabama.
* Strunk, P.; Abels, J. ''Das große Abenteuer 2.Teil'', Verlag Karl Wenzel, Marburg, 1986.
* Teeter, Emily, 1987. ''Techniques and Terminology of Rope-Making in Ancient Egypt'', Journal of Egyptian Archaeology, Vol. 73 (1987).
* Tyson, William, no date. ''Rope, a History of the Hard Fibre Cordage Industry in the United Kingdom'', Wheatland Journals, Ltd., London.
Ropewalk: A Cordage Engineer's Journey Through History
History of ropemaking resource and nonprofit documentary film
Watch ''How Do They Braid Rope?''
Category:Articles containing video clips