HOME

TheInfoList



OR:

Vitrification (from
Latin Latin (, or , ) is a classical language belonging to the Italic languages, Italic branch of the Indo-European languages. Latin was originally a dialect spoken in the lower Tiber area (then known as Latium) around present-day Rome, but through ...
''vitreum'', "glass" via French ''vitrifier'') is the full or partial transformation of a substance into a
glass Glass is a non-crystalline, often transparent, amorphous solid that has widespread practical, technological, and decorative use in, for example, window panes, tableware, and optics. Glass is most often formed by rapid cooling (quenching) o ...
, that is to say, a non-
crystalline A crystal or crystalline solid is a solid material whose constituents (such as atoms, molecules, or ions) are arranged in a highly ordered microscopic structure, forming a crystal lattice that extends in all directions. In addition, macrosc ...
amorphous solid In condensed matter physics and materials science, an amorphous solid (or non-crystalline solid, glassy solid) is a solid that lacks the long-range order that is characteristic of a crystal. Etymology The term comes from the Greek ''a'' ("wi ...
. Glasses differ from liquids structurally and glasses possess a higher degree of connectivity with the same
Hausdorff dimension In mathematics, Hausdorff dimension is a measure of ''roughness'', or more specifically, fractal dimension, that was first introduced in 1918 by mathematician Felix Hausdorff. For instance, the Hausdorff dimension of a single point is zero, of a ...
ality of bonds as crystals: dimH = 3. In the production of
ceramics A ceramic is any of the various hard, brittle, heat-resistant and corrosion-resistant materials made by shaping and then firing an inorganic, nonmetallic material, such as clay, at a high temperature. Common examples are earthenware, porcelain, ...
, vitrification is responsible for its impermeability to
water Water (chemical formula ) is an inorganic, transparent, tasteless, odorless, and nearly colorless chemical substance, which is the main constituent of Earth's hydrosphere and the fluids of all known living organisms (in which it acts as a ...
. Vitrification is usually achieved by heating materials until they liquidize, then cooling the liquid, often rapidly, so that it passes through the
glass transition The glass–liquid transition, or glass transition, is the gradual and reversible transition in amorphous materials (or in amorphous regions within semicrystalline materials) from a hard and relatively brittle "glassy" state into a viscous or rub ...
to form a glassy solid. Certain chemical reactions also result in glasses. In terms of
chemistry Chemistry is the scientific study of the properties and behavior of matter. It is a natural science that covers the elements that make up matter to the compounds made of atoms, molecules and ions: their composition, structure, propertie ...
, vitrification is characteristic for amorphous materials or disordered systems and occurs when bonding between elementary particles (
atoms Every atom is composed of a nucleus and one or more electrons bound to the nucleus. The nucleus is made of one or more protons and a number of neutrons. Only the most common variety of hydrogen has no neutrons. Every solid, liquid, gas, and ...
,
molecules A molecule is a group of two or more atoms held together by attractive forces known as chemical bonds; depending on context, the term may or may not include ions which satisfy this criterion. In quantum physics, organic chemistry, and bioche ...
, forming blocks) becomes higher than a certain threshold value. Thermal fluctuations break the bonds; therefore, the lower the
temperature Temperature is a physical quantity that expresses quantitatively the perceptions of hotness and coldness. Temperature is measured with a thermometer. Thermometers are calibrated in various temperature scales that historically have relied o ...
, the higher the degree of connectivity. Because of that, amorphous materials have a characteristic threshold temperature termed glass transition temperature (''T''g): below ''T''g amorphous materials are glassy whereas above ''T''g they are molten. The most common applications are in the making of
pottery Pottery is the process and the products of forming vessels and other objects with clay and other ceramic materials, which are fired at high temperatures to give them a hard and durable form. Major types include earthenware, stoneware and p ...
, glass, and some types of food, but there are many others, such as the vitrification of an antifreeze-like liquid in
cryopreservation Cryo-preservation or cryo-conservation is a process where organisms, organelles, cells, tissues, extracellular matrix, organs, or any other biological constructs susceptible to damage caused by unregulated chemical kinetics are preserved by co ...
. In a different sense of the word, the embedding of material inside a glassy matrix is also called ''vitrification''. An important application is the vitrification of radioactive waste to obtain a substance that is thought to be safer and more stable for disposal. According to several sources, during the
eruption of Mount Vesuvius in 79 Of the many eruptions of Mount Vesuvius, a major stratovolcano in southern Italy, the best-known is its eruption in 79 AD, which was one of the deadliest in European history. The eruption of Mount Vesuvius in 79 AD is one of the best-known in h ...
AD a victim's
brain A brain is an organ that serves as the center of the nervous system in all vertebrate and most invertebrate animals. It is located in the head, usually close to the sensory organs for senses such as vision. It is the most complex organ in ...
was vitrified by the
extreme heat A heat wave, or heatwave, is a period of excessively hot weather, which may be accompanied by high humidity, especially in oceanic climate countries. While definitions vary, a heat wave is usually measured relative to the usual climate in the ...
of the
volcanic ash Volcanic ash consists of fragments of rock, mineral crystals, and volcanic glass, created during volcanic eruptions and measuring less than 2 mm (0.079 inches) in diameter. The term volcanic ash is also often loosely used to refer ...
, however this has been strenuously disputed.


Ceramics

Vitrification is the progressive partial fusion of a
clay Clay is a type of fine-grained natural soil material containing clay minerals (hydrous aluminium phyllosilicates, e.g. kaolin, Al2 Si2 O5( OH)4). Clays develop plasticity when wet, due to a molecular film of water surrounding the clay parti ...
, or of a body, as a result of a firing process. As vitrification proceeds, the proportion of glassy bond increases and the apparent porosity of the fired product becomes progressively lower. Vitreous bodies have open porosity, and may be either opaque or
translucent In the field of optics, transparency (also called pellucidity or diaphaneity) is the physical property of allowing light to pass through the material without appreciable scattering of light. On a macroscopic scale (one in which the dimensions ...
. In this context, "zero porosity" may be defined as less than 1% water absorption. However, various standard procedures define the conditions of water absorption. An example is by
ASTM ASTM International, formerly known as American Society for Testing and Materials, is an international standards organization that develops and publishes voluntary consensus technical standards for a wide range of materials, products, systems, an ...
, who state "The term vitreous generally signifies less than 0.5% absorption, except for floor and wall tile and low-voltage electrical insulators, which are considered vitreous up to 3% water absorption."
Pottery Pottery is the process and the products of forming vessels and other objects with clay and other ceramic materials, which are fired at high temperatures to give them a hard and durable form. Major types include earthenware, stoneware and p ...
can be made impermeable to water by glazing or by vitrification.
Porcelain Porcelain () is a ceramic material made by heating substances, generally including materials such as kaolinite, in a kiln to temperatures between . The strength and translucence of porcelain, relative to other types of pottery, arises mai ...
,
bone china Bone china is a type of ceramic that is composed of bone ash, feldspathic material, and kaolin. It has been defined as "ware with a translucent body" containing a minimum of 30% of phosphate derived from animal bone and calculated calcium phosph ...
, and sanitaryware are examples of vitrified pottery, and are impermeable even without glaze.
Stoneware Stoneware is a rather broad term for pottery or other ceramics fired at a relatively high temperature. A modern technical definition is a vitreous or semi-vitreous ceramic made primarily from stoneware clay or non- refractory fire clay. Whether ...
may be vitrified or semi-vitrified; the latter type would not be impermeable without glaze.


Applications

When sucrose is cooled slowly it results in crystal
sugar Sugar is the generic name for sweet-tasting, soluble carbohydrates, many of which are used in food. Simple sugars, also called monosaccharides, include glucose, fructose, and galactose. Compound sugars, also called disaccharides or double ...
(or
rock candy Rock candy or sugar candy, also called rock sugar, or crystal sugar, is a type of confection composed of relatively large sugar crystals. This candy is formed by allowing a supersaturated solution of sugar and water to crystallize onto a su ...
), but when cooled rapidly it can form syrupy
cotton candy Cotton candy, also known as fairy floss and candy floss, is a spun sugar confection that resembles cotton. It usually contains small amounts of flavoring or food coloring. It is made by heating and liquefying sugar, and spinning it centrifu ...
(candyfloss). Vitrification can also occur in a liquid such as water, usually through very rapid cooling or the introduction of agents that suppress the formation of ice crystals. This is in contrast to ordinary
freezing Freezing is a phase transition where a liquid turns into a solid when its temperature is lowered below its freezing point. In accordance with the internationally established definition, freezing means the solidification phase change of a liquid o ...
which results in ice crystal formation. Vitrification is used in
cryo-electron microscopy Cryogenic electron microscopy (cryo-EM) is a cryomicroscopy technique applied on samples cooled to cryogenic temperatures. For biological specimens, the structure is preserved by embedding in an environment of vitreous ice. An aqueous sample sol ...
to cool samples so quickly that they can be imaged with an electron microscope without damage. In 2017, the Nobel prize for chemistry was awarded for the development of this technology, which can be used to image objects such as proteins or virus particles. Ordinary
soda-lime glass Soda lime is a mixture of NaOH and CaO chemicals, used in granular form in closed breathing environments, such as general anaesthesia, submarines, rebreathers and recompression chambers, to remove carbon dioxide from breathing gases to prevent ...
, used in windows and drinking containers, is created by the addition of sodium carbonate and lime (
calcium oxide Calcium oxide (CaO), commonly known as quicklime or burnt lime, is a widely used chemical compound. It is a white, caustic, alkaline, crystalline solid at room temperature. The broadly used term "'' lime''" connotes calcium-containing inorganic ...
) to silicon dioxide. Without these additives, silicon dioxide would require very high temperature to obtain a melt, and subsequently (with slow cooling) a glass. Vitrification is used in disposal and long-term storage of
nuclear waste Radioactive waste is a type of hazardous waste that contains radioactive material. Radioactive waste is a result of many activities, including nuclear medicine, nuclear research, nuclear power generation, rare-earth mining, and nuclear weapons ...
or other hazardous wastes in a method called
geomelting GeoMelt is a process by which dangerous, contaminated material (such as radioactive waste and heavy metals) is mixed with clean soil, a blend of industrial minerals, and/or glass frit and melted to create an extremely hard and leach-resistant glass ...
. Waste is mixed with glass-forming chemicals in a furnace to form molten glass that then solidifies in canisters, thereby immobilizing the waste. The final waste form resembles obsidian and is a non- leaching, durable material that effectively traps the waste inside. It is widely assumed that such waste can be stored for relatively long periods in this form without concern for air or groundwater
contamination Contamination is the presence of a constituent, impurity, or some other undesirable element that spoils, corrupts, infects, makes unfit, or makes inferior a material, physical body, natural environment, workplace, etc. Types of contamination ...
. Bulk vitrification uses
electrode An electrode is an electrical conductor used to make contact with a nonmetallic part of a circuit (e.g. a semiconductor, an electrolyte, a vacuum or air). Electrodes are essential parts of batteries that can consist of a variety of materials de ...
s to melt soil and wastes where they lie buried. The hardened waste may then be disinterred with less danger of widespread contamination. According to the Pacific Northwest National Labs, "Vitrification locks dangerous materials into a stable glass form that will last for thousands of years."


Vitrification in cryopreservation

Vitrification in cryopreservation is used to preserve, for example, human egg cells (
oocyte An oocyte (, ), oöcyte, or ovocyte is a female gametocyte or germ cell involved in reproduction. In other words, it is an immature ovum, or egg cell. An oocyte is produced in a female fetus in the ovary during female gametogenesis. The female g ...
s) (in
oocyte cryopreservation Human oocyte cryopreservation (egg freezing) is a procedure to preserve a woman's eggs (oocytes). This technique has been used to enable women to postpone pregnancy to a later date – whether for medical reasons (such as cancer treatment), or fo ...
) and embryos (in embryo cryopreservation). Currently, vitrification techniques have only been applied to brains ( neurovitrification) by Alcor and to the upper body by the Cryonics Institute, but research is in progress by both organizations to apply vitrification to the whole body. Many
woody plants A woody plant is a plant that produces wood as its structural tissue and thus has a hard stem. In cold climates, woody plants further survive winter or dry season above ground, as opposite to herbaceous plants that die back to the ground until s ...
living in polar regions naturally vitrify their cells to survive the cold. Some can survive immersion in
liquid nitrogen Liquid nitrogen—LN2—is nitrogen in a liquid state at low temperature. Liquid nitrogen has a boiling point of about . It is produced industrially by fractional distillation of liquid air. It is a colorless, low viscosity liquid that is wide ...
and
liquid helium Liquid helium is a physical state of helium at very low temperatures at standard atmospheric pressures. Liquid helium may show superfluidity. At standard pressure, the chemical element helium exists in a liquid form only at the extremely low ...
. Vitrification can also applied to preservation of endanger plant species and their seeds. For example, recalcitrant seeds are considered as hard to preserve. Plant vitrification solution (PVS), one of application of vitrification, has successfully preserved Nymphaea caerulea's seed. Additives used in
cryobiology Cryobiology is the branch of biology that studies the effects of low temperatures on living things within Earth's cryosphere or in science. The word cryobiology is derived from the Greek words κρῧος ryos "cold", βίος ios "life", and λό ...
or produced naturally by organisms living in
polar region The polar regions, also called the frigid zones or polar zones, of Earth are the regions of the planet that surround its geographical poles (the North and South Poles), lying within the polar circles. These high latitudes are dominated by floa ...
s are called
cryoprotectant A cryoprotectant is a substance used to protect biological tissue from freezing damage (i.e. that due to ice formation). Arctic and Antarctic insects, fish and amphibians create cryoprotectants ( antifreeze compounds and antifreeze proteins) in th ...
s.


See also

*
Cryogenics In physics, cryogenics is the production and behaviour of materials at very low temperatures. The 13th IIR International Congress of Refrigeration (held in Washington DC in 1971) endorsed a universal definition of “cryogenics” and “cr ...
*
Crystallization Crystallization is the process by which solid forms, where the atoms or molecules are highly organized into a structure known as a crystal. Some ways by which crystals form are precipitating from a solution, freezing, or more rarely dep ...
*
Supercooling Supercooling, also known as undercooling, is the process of lowering the temperature of a liquid or a gas below its melting point without it becoming a solid. It achieves this in the absence of a seed crystal or nucleus around which a crystal ...
*
Vitrified fort Vitrified forts are stone enclosures whose walls have been subjected to vitrification through heat. It was long thought that these structures were unique to Scotland, but they have since been identified in several other parts of western and northe ...


Literature

* *Stefan Lovgren
"Corpses Frozen for Future Rebirth by Arizona Company"
March 2005, ''
National Geographic ''National Geographic'' (formerly the ''National Geographic Magazine'', sometimes branded as NAT GEO) is a popular American monthly magazine published by National Geographic Partners. Known for its photojournalism, it is one of the most widely ...
''


References

{{Reflist Glass Phase transitions Cryobiology it:Criopreservazione