HOME

TheInfoList



OR:

Plastic wrap, cling film, Saran wrap, cling wrap, Glad wrap or food wrap is a thin
plastic film Plastic film is a thin continuous polymeric material. Thicker plastic material is often called a "sheet". These thin plastic membranes are used to separate areas or volumes, to hold items, to act as barriers, or as printable surfaces. Plas ...
typically used for sealing
food Food is any substance consumed by an organism for nutritional support. Food is usually of plant, animal, or fungal origin, and contains essential nutrients, such as carbohydrates, fats, proteins, vitamins, or minerals. The substance is inge ...
items in containers to keep them fresh over a longer period of time. Plastic wrap, typically sold on rolls in boxes with a cutting edge, clings to many smooth surfaces and can thus remain tight over the opening of a container without
adhesive Adhesive, also known as glue, cement, mucilage, or paste, is any non-metallic substance applied to one or both surfaces of two separate items that binds them together and resists their separation. The use of adhesives offers certain advant ...
. Common plastic wrap is roughly 0.0005 inches (12.7 μm) thick. The trend has been to produce thinner plastic wrap, particularly for household use (where very little stretch is needed), so now the majority of brands on shelves around the world are 8, 9 or 10 μm thick.


Materials used

Plastic wrap was initially created from polyvinyl chloride (PVC), which remains the most common component globally. PVC has an acceptably-low permeability to water vapor and oxygen, helping to preserve the freshness of food. There are concerns about the transfer of
plasticizers A plasticizer ( UK: plasticiser) is a substance that is added to a material to make it softer and more flexible, to increase its plasticity, to decrease its viscosity, and/or to decrease friction during its handling in manufacture. Plasticize ...
from PVC into food.
Pliofilm Pliofilm was a plastic wrap made by the Goodyear Tire and Rubber Company at plants in the US state of Ohio. Invented in the early 1930s, it was made by dissolving rubber in a benzene solvent and treating it with gaseous hydrochloric acid. Pliofi ...
was made of various kinds of rubber chloride, used in the middle of the 20th century could be heat-sealed. A common, cheaper alternative to PVC is
low-density polyethylene Low-density polyethylene (LDPE) is a thermoplastic made from the monomer ethylene. It was the first grade of polyethylene, produced in 1933 by Imperial Chemical Industries (ICI) using a high pressure process via free radical polymerization. Its ...
(LDPE). It is less adhesive than PVC, but this can be remedied by adding
linear low-density polyethylene Linear low-density polyethylene (LLDPE) is a substantially linear polymer (polyethylene), with significant numbers of short branches, commonly made by copolymerization of ethylene with longer-chain olefins. Linear low-density polyethylene differs ...
(LLDPE), which also increases the film's tensile strength. In the US and Japan, plastic wrap is sometimes produced using
polyvinylidene chloride Polyvinylidene chloride, or polyvinylidene dichloride (PVDC), is a homopolymer of vinylidene chloride. History Ralph Wiley accidentally discovered polyvinylidene chloride polymer in 1933. He, then, was a college student who worked part-time at ...
(PVdC), though some brands, such as Saran wrap, have switched to other formulations due to environmental concerns.


Food use


Purpose

The most important role plastic wrap plays in food packaging is protection and preservation. Plastic wrap can prevent food from perishing, extend its shelf-life, and maintain the quality of food. Plastic wrap generally provides protection for food from three aspects: chemical (gases, moisture, and light), biological (microorganisms, insects and animals), and physical (mechanical damage). In addition to food protection and preservation, plastic wrap can also reduce
food waste Food loss and waste is food that is not eaten. The causes of food waste or loss are numerous and occur throughout the food system, during production, processing, distribution, retail and food service sales, and consumption. Overall, about on ...
, tag food information, ease the distribution processes, and increase product visibility and microwavability. In the 1970s Snappies cling-film was advertised in the UK by
Katie Boyle Caterina Irene Elena Maria Boyle, Lady Saunders (née Imperiali dei Principi di Francavilla; 29 May 1926 – 20 March 2018), usually known as Katie Boyle, was an Italian-born British actress, writer, radio announcer, television personality, gam ...
.


Health concern

Plastic materials are widely used in the food industry due to their low price and convenience; however, there has been an increased health concern because of the possibility of releasing undesirable chemicals from plastic materials into food products. Plastic packages are made of various materials such as polyethylene, low-density polyethylene, etc. Additives, including
lubricants A lubricant (sometimes shortened to lube) is a substance that helps to reduce friction between surfaces in mutual contact, which ultimately reduces the heat generated when the surfaces move. It may also have the function of transmitting forces, t ...
,
plasticizers A plasticizer ( UK: plasticiser) is a substance that is added to a material to make it softer and more flexible, to increase its plasticity, to decrease its viscosity, and/or to decrease friction during its handling in manufacture. Plasticize ...
, UV-absorbers,
colorants A colourant/colour additive (British spelling) or colorant/color additive (American spelling) is a substance that is added or applied in order to change the colour of a material or surface. Colourants can be used for many purposes including printin ...
, and
antioxidants Antioxidants are compounds that inhibit oxidation, a chemical reaction that can produce free radicals. This can lead to polymerization and other chain reactions. They are frequently added to industrial products, such as fuels and lubricants, ...
, are added into plastic materials in order to improve the quality and properties of the plastics. Besides, plastic materials are often coated and printed in the final processes, in which inks and
varnishes Varnish is a clear transparent hard protective coating or film. It is not a stain. It usually has a yellowish shade from the manufacturing process and materials used, but it may also be pigmented as desired, and is sold commercially in variou ...
are used. Although the barrier properties of the plastic packages provide protection of foods from external contaminations, the additives and coating materials in the plastic packages are able to penetrate into foods and cause health-related issues. "It is true that substances used to make plastics can leach into food," says Edward Machuga, Ph.D., a consumer safety officer in the
FDA The United States Food and Drug Administration (FDA or US FDA) is a federal agency of the Department of Health and Human Services. The FDA is responsible for protecting and promoting public health through the control and supervision of food s ...
's
Center for Food Safety and Applied Nutrition The Center for Food Safety and Applied Nutrition (CFSAN ( )) is the branch of the United States Food and Drug Administration (FDA) that regulates food, dietary supplements, cosmetics, drugs, biologics, medical devices, and radiological products. ...
. “But as part of the approval process, the FDA considers the amount of a substance expected to migrate into food and the toxicological concerns about the particular chemical.” A couple of cases have caught media attention in recent years. One case is in regard to
diethylhexyl adipate Bis(2-ethylhexyl) adipate or DEHA is an organic compound with the formula (CH2CH2CO2C8H17)2. It is the diester of 2-ethylhexanol and adipic acid. It is a colorless oily liquid. DEHA is sometimes called " dioctyl adipate", incorrectly. Another ...
(DEHA). DEHA is a plasticizer, a substance added to some plastics in order to make them flexible. The public concerns about DEHA exposure while consuming food with plastic wraps. There are potentials of exposure to DEHA; however, the levels of the exposure are much lower than the no toxic effect levels in animal studies. Another case is in regard to the dioxins, labeled as "likely human carcinogen" by the Environmental Protection Agency. The public has been misled by the claims that plastics contain dioxins , while Machuga stated that no evidence that shows plastic containers or films contain dioxins was seen by the FDA . Overall the use of plastic wrap in the food industry does not pose danger to human health.


Environmental concerns

The accumulation of
plastic debris Marine debris, also known as marine litter, is human-created waste that has deliberately or accidentally been released in a sea or ocean. Floating oceanic debris tends to accumulate at the center of gyres and on coastlines, frequently washin ...
on the Earth threatens both wildlife and the environment. Plastic debris might choke or trap wildlife, and it could also penetrate toxic compounds into ecosystems. This land-originated problem has become a problem in ocean ecosystem as well since streams and rivers which are close to the land have carried the plastic debris into the coast, and currents transfer it to everywhere in the ocean. Plastic debris is a potential danger to all forms of aquatic life. Some marine species, like sea turtles, take plastic as prey items by mistake. Besides, some species might even pick up plastics and feed their offspring, which cause huge problems on growth and even cause mortality. Toxic compounds in plastics can disrupt hormone regulation in the cells of organisms, which can lead to alteration of animals’ mating behavior, reproductive ability, and even cause the development of tumors. Plastic debris could be a big threat to lives in the ocean. A study shows that using recycled plastic materials can reduce the environmental impacts significantly as a result of minimizing exploration, mining and transportation of natural gas and oil. One of the possible ways to increase the recycling rate is adding fibrous reinforcement into plastics. The environmental impact has been assessed using the life cycle assessment method. The results showed that plastics with fibrous reinforcement added can sharply reduce resource usage and global warming in civil applications.


Medical use

* Some studies have suggested that wrapping
premature babies Preterm birth, also known as premature birth, is the birth of a baby at fewer than 37 weeks gestational age, as opposed to full-term delivery at approximately 40 weeks. Extreme preterm is less than 28 weeks, very early preterm birth is between ...
in plastic wrap immediately after birth may help prevent
low temperature In physics, cryogenics is the production and behaviour of materials at very low temperatures. The 13th IIR International Congress of Refrigeration (held in Washington DC in 1971) endorsed a universal definition of “cryogenics” and “cr ...
before arrival to the
neonatal intensive care unit A neonatal intensive care unit (NICU), also known as an intensive care nursery (ICN), is an intensive care unit (ICU) specializing in the care of ill or premature newborn infants. Neonatal refers to the first 28 days of life. Neonatal care, as kn ...
. * Plastic wrap is used as a
first aid First aid is the first and immediate assistance given to any person with either a minor or serious illness or injury, with care provided to preserve life, prevent the condition from worsening, or to promote recovery. It includes initial int ...
dressing for
burns Burns may refer to: * Burn, an injury (plural) People: * Burns (surname), includes list of people and characters Business: * Burns London, a British guitar maker Places: ;In the United States * Burns, Colorado, unincorporated community in Eagle ...
.


See also

*
Aluminium foil Aluminium foil (or aluminum foil in North American English; often informally called tin foil) is aluminium prepared in thin metal leaves with a thickness less than ; thinner gauges down to are also commonly used. Standard household foil is ty ...
*
Cellophane Cellophane is a thin, transparent sheet made of regenerated cellulose. Its low permeability to air, oils, greases, bacteria, and liquid water makes it useful for food packaging. Cellophane is highly permeable to water vapour, but may be coat ...
*
Overwrap An overwrap or wrap is a method of sealing a contained product, typically as part of retail packaging. It is often made of plastic film (sometimes called polywrapping) or paper. The wrap is applied over the bare product or can be applied over ...
*
Stretch wrap Stretch wrap or stretch film is a highly stretchable plastic film that is wrapped around items. The elastic recovery keeps the items tightly bound. In contrast, shrink wrap is applied loosely around an item and shrinks tightly with heat. While i ...
, plastic wrap used in large-scale industrial and commercial packaging *
Wax paper Waxed paper (also wax paper, waxpaper, or paraffin paper) is paper that has been made moisture-proof and grease-proof through the application of wax. The practice of oiling parchment or paper in order to make it semi-translucent or moisture-pro ...


References


External links

* {{Plastics Food preparation utensils Food storage Packaging materials Plastics applications