HOME

TheInfoList



OR:

Electronic circuit design comprises the analysis and synthesis of electronic circuits.


Methods

To design any electrical circuit, either analog or
digital Digital usually refers to something using discrete digits, often binary digits. Technology and computing Hardware *Digital electronics, electronic circuits which operate using digital signals **Digital camera, which captures and stores digital i ...
,
electrical engineers Electrical engineering is an engineering discipline concerned with the study, design, and application of equipment, devices, and systems which use electricity, electronics, and electromagnetism. It emerged as an identifiable occupation in the l ...
need to be able to predict the voltages and currents at all places within the circuit.
Linear circuit A linear circuit is an electronic circuit which obeys the superposition principle. This means that the output of the circuit ''F(x)'' when a linear combination of signals ''ax1(t) + bx2(t)'' is applied to it is equal to the linear combination o ...
s, that is, circuits wherein the outputs are linearly dependent on the inputs, can be analyzed by hand using complex analysis. Simple nonlinear circuits can also be analyzed in this way. Specialized software has been created to analyze circuits that are either too complicated or too nonlinear to analyze by hand. Circuit simulation software allows engineers to design circuits more efficiently, reducing the time cost and risk of error involved in building circuit prototypes. Some of these make use of hardware description languages such as VHDL or Verilog.


Network simulation software

More complex circuits are analyzed with circuit simulation software such as SPICE and EMTP.


Linearization around operating point

When faced with a new circuit, the software first tries to find a steady state solution wherein all the nodes conform to Kirchhoff's Current Law ''and'' the voltages across and through each element of the circuit conform to the voltage/current equations governing that element. Once the steady state solution is found, the software can analyze the response to perturbations using piecewise approximation, harmonic balance or other methods.


Piece-wise linear approximation

Software such as the PLECS interface to
Simulink Simulink is a MATLAB-based graphical programming environment for modeling, simulating and analyzing multidomain dynamical systems. Its primary interface is a graphical block diagramming tool and a customizable set of block libraries. It offers t ...
uses piecewise linear approximation of the equations governing the elements of a circuit. The circuit is treated as a completely linear network of ideal diodes. Every time a diode switches from on to off or vice versa, the configuration of the linear network changes. Adding more detail to the approximation of equations increases the accuracy of the simulation, but also increases its running time.


Synthesis

Simple circuits may be designed by connecting a number of elements or functional blocks such as integrated circuits. More complex digital circuits are typically designed with the aid of computer software. Logic circuits (and sometimes mixed mode circuits) are often described in such hardware description languages as HDL, VHDL or Verilog, then synthesized using a logic synthesis engine.


References


See also

*
Integrated circuit design Integrated circuit design, or IC design, is a sub-field of electronics engineering, encompassing the particular logic and circuit design techniques required to design integrated circuits, or ICs. ICs consist of miniaturized electronic compon ...
{{DEFAULTSORT:Electronic Circuit Design Electronic design