Barges

Barge nowadays generally refers to a flat-bottomed inland waterway vessel which does not have its own means of mechanical propulsion. The first modern barges were pulled by tugs, but nowadays most are pushed by pusher boats, or other vessels. The term barge has a rich history, and therefore there are many other types of barges.

History of the barge

Etymology

"Barge" is attested from 1300, from Old French ''barge'', from Vulgar Latin ''barga''. The word originally could refer to any small boat; the modern meaning arose around 1480. ''Bark'' "small ship" is attested from 1420, from Old French ''barque'', from Vulgar Latin ''barca'' (400 AD). The more precise meaning of Barque as "three-masted sailing vessel" arose in the 17th century, and often takes the French spelling for disambiguation. Both are probably derived from the Latin ''barica'', from Greek ''baris'' "Egyptian boat", from Coptic ''bari'' "small boat", hieroglyphic Egyptian D58-G29-M17-M17-D21-P1 and similar ''ba-y-r'' for "basket-shaped boat". By extension, the term "embark" literally means to board the kind of boat called a "barque".

The British river barge

In Great Britain a merchant barge was originally a flat bottomed merchant vessel for use on navigable rivers. Most of these barges had sails. For traffic on the River Severn the barge was described as: ''The lesser sort are called barges and frigates, being from forty to sixty feet in length, having a single mast and square sail, and carrying from twenty to forty tons burthen.'' The larger vessels were called trows. On the River Irwell there was reference to barges passing below Barton Aqueduct with their mast and sails standing. Barges on the Thames were called west country barges.

Narrowboats and Widebeams

During the Industrial Revolution, a substantial network of narrow canals was developed in Great Britain from 1750 onward. These new British canals had locks of only wide. This led to the development of the narrowboats, which had a beam of no more than . It was soon realized that the narrow locks were too limiting. Later locks were therefore doubled in width to . This led to the development of the widebeam.

The narrowboats were initially also known as barges, but only a very few had sails. From the start, most of the new canals were constructed with an adjacent towpath, which made it possible to tow them by draft horses. These types of canal craft are so specific that on the British canal system the term 'barge' is not used to describe narrowboats and widebeams.

The Thames barge and Dutch barge

On the British canal system, the Thames sailing barge, and Dutch barge and unspecified other styles of barge, are still known as barges. The term Dutch barge is nowadays often used to refer to an accommodation ship, but originally refers to the slightly larger Dutch version of the Thames sailing barge.

Crew and pole

The people who moved barges were known as lightermen. Poles are used on barges to fend off other nearby vessels or a wharf. These are often called 'pike poles'. The long pole used to maneuver or propel a barge has given rise to the saying "I wouldn't touch that ubject/thingwith a barge pole."

The 19th century British barge

In the United Kingdom the word barge had many meanings by the 1890s, and these varied locally. On the Mersey a barge was called a 'Flat', on the Thames a Lighter or barge, and on the Humber a 'Keel'. A Lighter had neither mast nor rigging. A keel did have a single mast with sails. Barge and lighter were used indiscriminately. A local distinction was that any flat that was not propelled by steam was a barge, although it might be a sailing flat.

The term Dumb barge was probably taken into use to end the confusion. The term Dumb barge surfaced in the early nineteenth century. It first denoted the use of a barge as a mooring platform in a fixed place. As it went up and down with the tides, it made a very convenient mooring place for steam vessels. Within a few decades, the term dumb barge evolved, and came to mean: 'a vessel propelled by oars only'. By the 1890s Dumb barge was still used only on the Thames.

By 1880 barges on British rivers and canals were often towed by steam tugboats. On the Thames, many dumb barges still relied on their poles, oars and the tide. Others dumb barges made use of about 50 tugboats to tow them to their destinations. While many coal barges were towed, many dumb barges that handled single parcels were not.

The 19th century American barge

In the United States a barge was not a sailing vessel by the end of the 19th century. Indeed, barges were often created by cutting down razeeing sailing vessels. In New York this was an accepted meaning of the term barge. The somewhat smaller scow was built as such, but the scow also had its sailing counterpart the sailing scow.

The modern barge

The iron barge

The innovation that led to the modern barge was the use of iron barges towed by a steam tugboat. These were first used to transport grain and other bulk products. From about 1840 to 1870 the towed iron barge was quickly introduced on the Rhine, Danube, Don, Dniester, and rivers in Egypt, India and Australia. Many of these barges were built in Great Britain.

Nowadays 'barge' generally refers to a dumb barge. In Europe, a Dumb barge is: ''An inland waterway transport freight vessel designed to be towed which does not have its own means of mechanical propulsion''. In America, a barge is generally pushed.

Modern use

Barges are used today for low-value bulk items, as the cost of hauling goods by barge is very low. Barges are also used for very heavy or bulky items; a typical American barge measures , and can carry up to about of cargo. The most common European barge measures and can carry up to about .

As an example, on June 26, 2006, a catalytic cracking unit reactor was shipped by barge from the Tulsa Port of Catoosa in Oklahoma to a refinery in Pascagoula, Mississippi. Extremely large objects are normally shipped in sections and assembled onsite, but shipping an assembled unit reduced costs and avoided reliance on construction labor at the delivery site (which in this case was still recovering from Hurricane Katrina). Of the reactor's journey, only about were traveled overland, from the final port to the refinery.

Self-propelled barges may be used as such when traveling downstream or upstream in placid waters; they are operated as an unpowered barge, with the assistance of a tugboat, when traveling upstream in faster waters. Canal barges are usually made for the particular canal in which they will operate.

Barges in the United States

In times before industrial development, railways, and highways: barges were the predominant and most efficient means of inland transportation in many regions. This holds true today, for many areas of the world.

In such pre-industrialized, or poorly developed infrastructure regions, many barges are purpose-designed to be powered on waterways by long slender poles – thereby becoming known on American waterways as poleboats as the extensive west of North America was settled using the vast tributary river systems of the Mississippi drainage basin. Poleboats use muscle power of "walkers" along the sides of the craft pushing a pole against the streambed, canal or lake bottom to move the vessel where desired. In settling the American west it was generally faster to navigate downriver from Brownsville, Pennsylvania, to the Ohio River confluence with the Mississippi and then pole upriver against the current to St. Louis than to travel overland on the rare primitive dirt roads for many decades after the American Revolution.

Once the New York Central and Pennsylvania Railroads reached Chicago, that time dynamic changed, and American poleboats became less common, relegated to smaller rivers and more remote streams. On the Mississippi riverine system today, including that of other sheltered waterways, industrial barge trafficking in bulk raw materials such as coal, coke, timber, iron ore and other minerals is extremely common; in the developed world using huge cargo barges that connect in groups and trains-of-barges in ways that allow cargo volumes and weights considerably greater than those used by pioneers of modern barge systems and methods in the Victorian era.

Such barges need to be towed by tugboats or pushed by towboats. Canal barges, towed by draft animals on a waterway adjacent towpath were of fundamental importance in the early Industrial Revolution, whose major early engineering projects were efforts to build viaducts, aqueducts and especially canals to fuel and feed raw materials to nascent factories in the early industrial takeoff (18th century) and take their goods to ports and cities for distribution.

The barge and canal system contended favourably with the railways in the early Industrial Revolution before around the 1850s–1860s; for example, the Erie Canal in New York state is credited by economic historians with giving the growth boost needed for New York City to eclipse Philadelphia as America's largest port and city – but such canal systems with their locks, need for maintenance and dredging, pumps and sanitary issues were eventually outcompeted in the carriage of high-value items by the railways due to the higher speed, falling costs and route flexibility of rail transport. Barge and canal systems were nonetheless of great, perhaps even primary, economic importance until after the First World War in Europe, particularly in the more developed nations of the Low Countries, France, Germany and especially Great Britain which more or less made the system characteristically its own.

Nowadays, custom built special purpose equipment called modular barges are extensively used in surveying, mapping, laying and burial of subsea optic fibre cables worldwide and other support services.

In the United States, deckhands perform the labor and are supervised by a bos'n or the mate. The captain and pilot steer the towboat, which pushes one or more barges held together with rigging, collectively called 'the tow'. The crew live aboard the towboat as it travels along the inland river system or the intracoastal waterways. These towboats travel between ports and are also called line-haul boats.

Types

* Admiral's barge
* Articulated tug and barge
* Barracks barge ("accommodation barge")
* Bin barge
* Canal motorship
* Car float
* Ferrocement or "Concrete" Barge
* Crane barge
* Dredges
* Deck barge
* Dutch barge
* Dry bulk cargo barge
*Gundalow
* Hopper barge
* Hotel barge
* Horse-drawn boat
* Jackup barge
* Landing craft
* Lighter
* Liquid cargo barge
* Log barge
* Notch barge
* Narrowboat
* Norfolk wherry
* Rocket landing barge
* Oil barge
* Paddle barge
* Péniche or Spitz barge
* Pleasure barge
* Power barge
* Row barge
* Royal barge
* Sand barge
* Severn trow
* Tank barge
* Thames sailing barge
* Tub boat
* Vehicular barge
* Whaleback barge
* Widebeam

Image gallery

File:PénicheRecyclageFerrailles2008Deûle2.jpg, A self propelled barge carrying recycling material on Deûle channel in Lambersart, France
File:Barge with cars.jpg, Self-propelled car barge on the River Danube
File:Péniches sur le Canal du Midi.jpg, Barges near Toulouse, France
File:Andromeda (ship, 1958) Hannover Mittellandkanal 2006 by-RaBoe.jpg, Self-propelled barge ''Andromeda'' in canal at Hanover, Germany
File:Messina_Karden_Bug.jpg, Tank barge on the River Moselle, Germany
File:CrushedStoneBarge.jpg, Self-propelled barge carrying bulk crushed stone
File:IjmuidenBarge.jpg, Self-propelled barge in the port of IJmuiden, Netherlands
File:Pegasus_barge_being_moved_by_Freedom_Star_and_towboat_American_2.jpg, Barge carrying the Space Shuttle external tank for STS-119 under tow to Port Canaveral, Florida, United States
File:Yangzhou-Modern-Grand-Canal-boats-3351.JPG, Self-propelled barges on the Grand Canal of China near Yangzhou, Jiangsu, China
File:CoalbargePittsburgh.JPG, Coal barges passing Heinz Field in Pittsburgh, Pennsylvania on the Ohio River
File:Suphannahongsa-docked.jpg, Royal Barge ''Suphannahong'' docked at Wat Arun pier, one of the Thai royal barges featured in the royal barge ceremony
Image:Donna York.jpg, Towboat ''Donna York'' pushing barges of coal up the Ohio River at Louisville, Kentucky, United States
File:Ilia Efimovich Repin (1844-1930) - Volga Boatmen (1870-1873).jpg, '' Barge Haulers on the Volga'' (1870–73), by Ilya Repin
File:Kapal tongkang.jpg, ''Tongkang'' or car barge, landed on Ketapang Port, Banyuwangi, Indonesia
File:slipway at portland.JPG, Slipway at Portland Harbour, Dorset, England, holding a split dump barge (on right)
File:Barge on Mosel by Kues (1).jpg, Barge on the river Mosel in Germany.
File:Water_Barge_YW-59.jpg, US Navy Water Type B ship Barge, YW-59, launched August 29, 1941
File:YFN-958-Covered_Lighter_Barge-Non-Self-Propelled.jpg, YFN-958 a covered lighter barge, non-Self-propelled. Built by Mare Island Navy Shipyard in 1944.
File:Concrete Barge - Erie Canal - Lock 13 - 3.jpg, Ferrocement Barge, US-102, in the Erie Canal
File:Ww2 concrete barge, National Waterway Museum.jpg, WW2 concrete barge at the National Waterways Museum, Ellesmere Port, Cheshire, UK
File:Sun Shining Into a Barge.jpg, Sun shining into the empty asphalt barge ''Endeavour'' while under repair in Muskegon, Michigan.
File:Pelican Barge, Darling Harbor, Sydney, NSW, AU.jpg, A barge decorated to look like a pelican carrying a jumbotron display.
File:AWB Rajawali Natuna.jpg, Accommodation Work Barge

See also

* American Waterways Operators
* Burlak
* Canal boat ''Ross Barlow''
* Car float
* Chain boat
* Container on barge
* Dory
* Float (nautical)
* ''Hughes Mining Barge''
* Lighter
* Mobro 4000
* Pusher (boat)
* Shallop
* Tub boat
* Type B ship

References

*
*
*
*
*
*
*
*
*
*
*

Notes

External links

Barge Lehigh Valley 79 at the Waterfront Museum
Brooklyn, New York, United States

Britain's Official guide to canals, rivers and lakes
*



DBA The Barge Association

The American Waterways Operators

{{authority control

Shipping