Zippe-type centrifuge

The Zippe-type centrifuge is a gas centrifuge designed to enrich the rare fissile isotope uranium-235 (²³⁵U) from the mixture of isotopes found in naturally occurring uranium compounds. The isotopic separation is based on the slight difference in mass of the isotopes. The Zippe design was originally developed in the Soviet Union by a team led by 60 Austrian and German scientists and engineers captured after World War II, working in detention. In the West (and now generally) the type is known by the name of the man who recreated the technology after his return to the West in 1956, based on his recollection of his work in (and contributions to) the Soviet program, Gernot Zippe. To the extent that it might be referred to in Soviet/Russian usage by any one person's name, it was known (at least at a somewhat earlier stage of development) as a Kamenev centrifuge (after Evgeni Kamenev).Oleg Bukharin, Oleg
Russia’s Gaseous Centrifuge Technology and Uranium Enrichment Complex
2004.

Background

Natural uranium consists of three isotopes; the majority (99.274%) is U-238, while approximately 0.72% is fissile U-235 and the remaining 0.0055% is U-234. If natural uranium is enriched to contain 3% U-235, it can be used as fuel for light water nuclear reactors. If it is enriched to contain 90% uranium-235, it can be used for nuclear weapons.

Centrifuge uranium enrichment

Enriching uranium is difficult because the isotopes are practically identical in chemistry and very similar in weight: U-235 is only 1.26% lighter than U-238 (note this applies only to uranium metal). Separation efficiency in a centrifuge depends on weight difference. However, centrifuges need to work with a gas rather than a solid, and the gas used here is uranium hexafluoride. Here the mass difference between ²³⁵UF₆ and ²³⁸UF₆ is less than 0.86%. Separation of uranium isotopes requires a centrifuge that can spin at 1,500 revolutions per second (90,000RPM). If we assume a rotor diameter of 20 cm (actual rotor diameter is likely to be less), this corresponds to a linear speed of greater than Mach2 (Mach1 ≈ 340 m/s at sea level). For comparison, automatic washing machines operate at only about 12 to 25 revolutions per second (720–1500RPM) during the spin cycle, while turbines in automotive turbochargers can run up to around 2500–3333 revolutions per second (150,000–200,000RPM).How A Turbo Works
/ref>
/ref>

A Zippe-type centrifuge has a hollow, cylindrical rotor filled with gaseous uranium hexafluoride. A rotating magnetic field at the bottom of the rotor, as used in an electric motor, is able to spin it quickly enough that the U-238 is thrown towards the edge. The lighter U-235 collects near the center. The bottom of the gaseous mix is heated, producing convection currents that move the U-238 down. The U-235 moves up, where scoops collect it. Each centrifuge has one inlet and two output lines (corresponding to the heavy and the light fractions).

At the high speed of rotation, the gas is compressed close to the wall of the rotor. The rotor can be several meters in length (diameter is likely to be less than 10 cm) and a temperature gradient of between the top and bottom of the rotor produces a very strong convection current. In addition, the very strong Coriolis forces produced add to the separation efficiency.

To reduce friction, the rotor spins in a vacuum. A magnetic bearing holds the top of the rotor steady, and the only physical contact is the conical jewel bearing on which the rotor sits. The three gas lines must be concentric with the fixed axis as the outer rim is spinning very quickly, and the seal is very important.

After the scientists were released from Soviet captivity in 1956, Gernot Zippe was surprised to find that engineers in the West were years behind in their centrifuge technology. He was able to reproduce his design at the University of Virginia in the United States, publishing the results, even though the Soviets had confiscated his notes. Zippe left the United States when he was effectively barred from continuing his research: The Americans classified the work as secret, requiring him either to become a U.S. citizen (he refused), return to Europe, or abandon his research. He returned to Europe where, during the 1960s, he and his colleagues made the centrifuge more efficient by changing the material of the rotor from aluminium to maraging steel, an alloy with a longer fatigue life, which allowed higher speed. This improved centrifuge design is used by the commercial company Urenco to produce enriched uranium fuel for nuclear power stations.

The exact details of advanced Zippe-type centrifuges are closely guarded secrets, but the efficiency of the centrifuges is improved by making them longer, and increasing their speed of rotation. To do so, even stronger materials, such as carbon fiber-reinforced composite materials, are used; and various techniques are used to avoid forces causing destructive vibrations, including the use of flexible "bellows" to allow controlled flexing of the rotor, as well as careful speed control to ensure that the centrifuge does not operate for very long at speeds where resonance is a problem.

The Zippe-type centrifuge is difficult to build successfully and requires carefully machined parts. However, compared to other enrichment methods, it is much cheaper and more energy-efficient, and can be used in relative secrecy. This makes it ideal for covert nuclear-weapons programs and possibly increases the risk of nuclear proliferation. Centrifuge cascades also have much less material held in the machine at any time, unlike gaseous diffusion plants.

Global usage

Pakistan's atomic bomb program developed the P1 and P2 centrifuges; the first two centrifuges that Pakistan deployed in larger numbers but reduce it after 1981 based on estimation require for critical mass. The P1 centrifuge uses an aluminum rotor, and the P2 centrifuge uses a maraging steel rotor, which is stronger, spins faster, and enriches more uranium per machine than the P1. In Pakistan, the Zippe-type centrifuge had a local designation and was known as Centrifuge Khan (after Abdul Qadeer Khan).

Russian sources dispute the account of Soviet centrifuge development given by Gernot Zippe. They cite Max Steenbeck as the German scientist in charge of the German part of the Soviet centrifuge effort, which was started by German refugee Fritz Lange in the 1930s. The Soviets credit Steenbeck, Isaac Kikoin and Evgeni Kamenev with originating different valuable aspects of the design. They state Zippe was engaged in building prototypes for the project for two years from 1953. Since the centrifuge project was top secret the Soviets did not challenge any of Zippe's claims at the time.

Zippe-type centrifuge facilities

* Khan Research Laboratories in Pakistan
* National Enrichment Facility of Los Alamos National Laboratory in the United States
* Urenco Group in the Netherlands

See also

* Gas centrifuge
* Ultracentrifuge
* Magnetic levitation
* Thrust bearing
* German nuclear weapon project
* Germany and weapons of mass destruction
* Pakistan and weapons of mass destruction
* Netherlands and weapons of mass destruction
* Forced labor of Germans in the Soviet Union
* Russian Alsos
* Stuxnet

References

{{Reflist

External links

The Zippe Type - The Poor Man's Bomb
BBC Radio 4, 19 May 2004
Tracking the technology
Nuclear Engineering International, 31 August 2004
Slender and Elegant, It Fuels the Bomb
The New York Times, March 23, 2004
The Gas Centrifuge and Nuclear Proliferation
Marvin Miller, October 22, 2004
The gas centrifuge and nuclear weapons proliferation
Houston G. Wood, Alexander Glaser, and R. Scott Kemp, ''Physics Today'' page 40, September 2008
Long-term Energy Security Interests of the United States: Hearing Before the Congressional Subcommittee on Economic Stabilization, December11, 1990
page 140, John E. Gray, Vice Chairman of the Atlantic Council, citing Nuclear Fuel article Here Comes the Troika whilst testifying before the Subcommittee on Economic Stabilization (United States House Committee on Banking, Finance and Urbain Affaires)

Centrifuges
Isotope separation
Uranium
Nuclear technology in the Soviet Union
Soviet inventions
Germany–Soviet Union relations
Nuclear technology in Pakistan
Netherlands–Pakistan relations
K
ru:Центрифуга Циппе