The Z-tube is an experimental apparatus for measuring the

tensile strength Ultimate tensile strength (UTS), often shortened to tensile strength (TS), ultimate strength, or F_\text within equations, is the maximum stress that a material can withstand while being stretched or pulled before breaking. In brittle materials ...

of a

liquid A liquid is a nearly incompressible fluid that conforms to the shape of its container but retains a (nearly) constant volume independent of pressure. As such, it is one of the four fundamental states of matter (the others being solid, gas, ...

. It consists of a Z-shaped tube with open ends, filled with a liquid, and set on top of a spinning table. If the tube were straight, the liquid would immediately fly out one end or the other of the tube as it began to spin. By bending the ends of the tube back towards the center of

rotation Rotation, or spin, is the circular movement of an object around a '' central axis''. A two-dimensional rotating object has only one possible central axis and can rotate in either a clockwise or counterclockwise direction. A three-dimensional ...

, a shift of the liquid away from center will result in the

water level Water level, also known as gauge height or stage, is the elevation of the free surface of a sea, stream, lake or reservoir relative to a specified vertical datum.ISO 772: 1996. Hydrometric determinations – Vocabulary and symbols. See also * ...

in one end of the tube rising and thus increasing the

pressure Pressure (symbol: ''p'' or ''P'') is the force applied perpendicular to the surface of an object per unit area over which that force is distributed. Gauge pressure (also spelled ''gage'' pressure)The preferred spelling varies by country a ...

in that end of the tube, and consequently returning the liquid to the center of the tube. By measuring the

rotational speed Rotational frequency (also known as rotational speed or rate of rotation) of an object rotating around an axis is the frequency of rotation of the object. Its unit is revolution per minute (rpm), cycle per second (cps), etc. The symbol fo ...

and the distance from the center of rotation to the liquid level in the bent ends of the tube, the pressure reduction inside the tube can be calculated. Negative pressures, (i.e. less than zero absolute pressure, or in other words, tension) have been reported using water processed to remove dissolved gases. Tensile strengths up to 280 atmospheres have been reported for water in glass.

References

{{reflist Fluid mechanics Materials science Scientific instruments