Construction of Thai pipeline
Contractor and Building Time
In January 1997, the Tasco Mannesmann Joint Venture (TMJV a Thai-German Company Joint Venture), won the pipeline contract which included the procurement, construction and commissioning of the pipeline and related facilities, as well as the design of the Supervisory Control and Data Acquisition (SCADA) and Telecommunications system including a Fiber optic cable system. The Yadana Gas Pipeline in Thailand was built in 1997–1998.Design, Detail Engineering and Route selection
TheThe Pipeline System
The pipeline has a diameter of 42 inches and is around 240 kilometers long and it has a total number of 12 Block Valve Stations that includes 6 Scraper Facilities, an operations and maintenance center including a gas meter station and a SCADA Telecommunications system that was connected to the Petroleum Authority of Thailand's (PTT) existing SCADA system. After its completion the Yadana Gas Pipeline secured PTT with an alternative source of gas supply form Myanmar in addition to the Gulf of Thailand, on which PTT had totally relied upon.Starting & Ending Location of the Pipeline
The Yadana gas pipeline system connects with the 36 inch Yadana Myanmar gas pipeline at Ban I-tong, a small former mining village located in a forest mountain area, on the border in Kanchanaburi province in the Thong Pha Phum district at KP-000. At Scraper/Block Valve Station 1 located 350 meter away from the border the pipeline increases its diameter to 42 inch. It than transports the gas to the Ratchaburi Power Plant located at the end of the 240 km long pipeline. PTT's Operation and Maintenance Center is located at Pipeline Kilometer KP 233.2 at Ratchaburi adjacent toTerrain of the Pipeline
The pipeline routes through a widely differing types of terrain such as along roads, through paddy fields, sugar cane fields etc. and mountainous areas. The basic right of way for the pipeline, varying in width from 5 meters in road reserves to 10 meters in privately owned areas, and 12 to 20 meters in forestry areas, was provided by PTT, as was the land for the construction of other facilities. Additional working space was where required obtained by TMJV. This was done especially in areas of road reserves where the right of way was very narrow.Construction
TMJV used – as planned at the beginning of the Project – two main pipeline construction spreads. Both spreads were sufficiently equipped and have had mechanized welding crews. The mobilization of the imported construction equipment, local equipment and manpower was achieved as planned. Later in the project TMJV expanded the number of construction Spreads due to delays that were mainly due to land unavailability. The accelerated recovery measures that were implemented by the TMJV worked successfully and most of the lost time was recovered and the anticipated Project delay was significantly minimizedResults
The gas as it transported by the 42 inch Yadana Gas Pipeline is used for many purposes in Thailand and is a part of PTT's Gas Value Chain. According to PTT the Yadana Gas Pipeline is a highly sophisticated technical system and complies to the Thailand Quality Award (TQA) criterion. PTT did win a TQA award in 2010! The Yadana Gas Pipeline deliveries about 25% of Thailand's Natural Gas demand. Thailand's total power generation is dominated by 58% of natural gas according to the referenced Bangkok Post Article dated on 14. October 2019 . August 2020 marked the 22nd anniversary of the Petroleum Authority of Thailand (PTT) 42-inch Natural Yadana Gas Pipeline operation from Ban I Tong to Ratchaburi. Since this time no operation pipeline accident was reported.References
{{reflist Natural gas pipelines in Myanmar Natural gas pipelines in Thailand