W33 (nuclear warhead)
   HOME

TheInfoList



OR:

The W33 (also known as the Mark 33, T317 and M422) was an American nuclear artillery shell designed for use in the M110 howitzer and M115 howitzer. A total of 2,000 W33 projectiles were produced, with the first production warheads entering the stockpile in 1957. The W33 remained in service until 1992. The warhead used enriched uranium (code named ''oralloy'') as its nuclear fissile material and could be used in two different yield configurations. This required the assembly and insertion of different pits, with the amount of fissile materials used controlling whether the destructive yield was low or high. The highest-yield version of the W33 may have been a boosted fission weapon.


History

Development of the W33 was authorized by the Army Ordnance Corps in June 1953. It was believed that a shell capable of being fired by a standard mobile field howitzer would be more effective while also providing a psychological effect in ground warfare. The design would also include consideration for being fired from navy guns, and would use nuclear components from the W9 nuclear artillery shell. The initial army designation for the weapon was Shell, AE, 8-inch, T317 and the Atomic Energy Commission (AEC) nomenclature was Mark 33. The army were assigned the task of designing, constructing and stockpiling the non-nuclear components of the weapon, while the AEC were assigned the design and construction of the nuclear components. The design remained in the research and development phase until funds were assigned to the project in February 1954. In April it was decided the weapon needed to be in service by July 1955, so the program was placed on a crash basis. The first Emergency Capability (EC) weapons entered the stockpile in July 1955. Production (non-EC) weapons were produced from January 1957 to January 1965. Approximately 2000 weapons were produced and all were retired by September 1992.


Design

The weapon used nuclear components from the W9 nuclear artillery shell, and these in turn were derived from the nuclear components in the
Mark 8 nuclear bomb The Mark 8 nuclear bomb was an American nuclear bomb, designed in the late 1940s and early 1950s, which was in service from 1952 to 1957. Description The Mark 8 was a gun-type nuclear bomb, which rapidly assembles several critical masse ...
. From official sources, the weapon was of the gun-type design and had a range of . Information regarding the W33 has suggested that it was either a double gun and/or that it may have used an annular barrel assembly. The device's internal mechanism was apparently code-named ''Fleegle''. A double gun mechanism reduces the required velocity of each projectile by half, which reduces the gun system weight by a factor of 8. An annular bore may allow a larger projectile which remains subcritical by itself (a hollow projectile has lower effective density, and critical mass scales with the square of density). Titanium was used to reduce weight of some components. Judging by the remaining photographic evidence, it is likely that the exterior casing of the artillery shell itself was made of titanium. This is plausible, given that the copper-alloy driving band around the base of the shell is the only part of the shell which engages with the
rifling In firearms, rifling is machining helical grooves into the internal (bore) surface of a gun's barrel for the purpose of exerting torque and thus imparting a spin to a projectile around its longitudinal axis during shooting to stabilize the pro ...
on the artillery piece's barrel. The W33 mechanism has been reported to have comprised two critical nuclear parts which were required to assemble a complete W33 warhead. The initial disassembly of stockpiled W33 warheads in 1992 proceeded first by disassembling all existing parts for one of the components, and then disassembling the other one in following years. The weapon had four yield variants, known as the Y1 through Y4, and written using the standard nomenclature in the form of W33Y1 etc. The yield of each type remains classified, but it has been alleged that the Y2 version had a yield of and the other versions were . Use control to prevent unauthorized firing of the weapon was provided by a cover fitted to the rear of the weapon with a combination lock. The cover prevented loading of the weapon into a gun.


Tests

The W33 is the third known model of gun-type fission weapons to have been detonated, and the second as a test explosion. The W33 was tested twice, first in Operation Plumbbob Laplace, on September 8, 1957 with a yield of , and the TX-33Y2 in Operation Nougat Aardvark on May 12, 1962, with a yield of . Neither test involved firing a W33 from an actual howitzer. Plumbbob Laplace was test fired with the device hanging from a balloon at an altitude of . Nougat Aardvark was test fired underground at a depth of . Prior gun-type detonations were the Little Boy Mark-2 nuclear weaponSandia 1967 History of Mk 4 bomb
Document, Sandia Laboratories; Accessed Nov. 10, 2019
used on Hiroshima in World War II, and a test firing of the W9 nuclear artillery shell in test shot
Upshot-Knothole Grable Upshot–Knothole ''Grable'' was a nuclear weapons test conducted by the United States as part of Operation Upshot–Knothole. Detonation of the associated nuclear weapon occurred 19 seconds after its deployment at 8:30am PDT (1530 UTC) on May ...
on May 25, 1953.


See also

* List of nuclear weapons *
W79 Artillery-Fired Atomic Projectile The W79 Artillery-Fired Atomic Projectile (AFAP), also known as the XM753 (Atomic RA) was an American nuclear artillery shell, capable of being fired from any NATO howitzer e.g. the M115 and M110 howitzer. Produced in two models, the enhanced ...


References


External links


Allbombs.html
list of all US nuclear weapons models a
nuclearweaponarchive.org


at GlobalSecurity.org {{United States nuclear devices Nuclear warheads of the United States Gun-type nuclear bombs Nuclear artillery Military equipment introduced in the 1950s