A cable harness, also known as a wire harness, wiring harness, cable assembly, wiring assembly or wiring loom, is an assembly of

electrical cable An electrical cable is an assembly of one or more wires running side by side or bundled, which is used to carry electric current. One or more electrical cables and their corresponding connectors may be formed into a ''cable assembly'', which ...

s or wires which transmit signals or electrical power. The cables are bound together by a durable material such as

rubber Rubber, also called India rubber, latex, Amazonian rubber, ''caucho'', or ''caoutchouc'', as initially produced, consists of polymers of the organic compound isoprene, with minor impurities of other organic compounds. Thailand, Malaysia, and ...

vinyl Vinyl may refer to: Chemistry * Polyvinyl chloride (PVC), a particular vinyl polymer * Vinyl cation, a type of carbocation * Vinyl group, a broad class of organic molecules in chemistry * Vinyl polymer, a group of polymers derived from vinyl m ...

electrical tape Electrical tape (or insulating tape) is a type of pressure-sensitive tape used to insulate electrical wires and other materials that conduct electricity. It can be made of many plastics, but PVC (polyvinyl chloride, "vinyl") is most popular, as i ...

conduit Conduit may refer to: Engineering systems * Conduit (fluid conveyance), a pipe suitable for carrying either open-channel or pressurized liquids * Electrical conduit, a protective cover, tube or piping system for electric cables * Conduit curre ...

, a weave of extruded string, or a combination thereof. Commonly used in

automobiles A car or automobile is a motor vehicle with wheels. Most definitions of ''cars'' say that they run primarily on roads, seat one to eight people, have four wheels, and mainly transport people instead of goods. The year 1886 is regarded as ...

, as well as construction machinery, cable harnesses provide several advantages over loose wires and cables. For example, many aircraft, automobiles and spacecraft contain many masses of wires which would stretch over several kilometers if fully extended. By binding the many wires and cables into a cable harness, the wires and cables can be better secured against the adverse effects of vibrations, abrasions, and moisture. By constricting the wires into a non-flexing bundle, usage of space is optimized, and the risk of a

short Short may refer to: Places * Short (crater), a lunar impact crater on the near side of the Moon * Short, Mississippi, an unincorporated community * Short, Oklahoma, a census-designated place People * Short (surname) * List of people known as ...

is decreased. Since the installer has only one harness to install (as opposed to multiple wires), installation time is decreased and the process can be easily standardized. Binding the wires into a

flame retardant The term flame retardants subsumes a diverse group of chemicals that are added to manufactured materials, such as plastics and textiles, and surface finishes and coatings. Flame retardants are activated by the presence of an ignition source a ...

sleeve also lowers the risk of electrical fires.

Production

Cable harnesses are usually designed according to geometric and electrical requirements. A diagram is then provided (either on paper or on a monitor) for the assembly preparation and assembly. The wires are first cut to the desired length, usually using a special wire-cutting machine. The wires may also be printed on by a special machine during the cutting process or on a separate machine. After this, the ends of the wires are stripped to expose the metal (or ''core'') of the wires, which are fitted with any required terminals or connector housings. The cables are assembled and clamped together on a special

workbench A workbench is a sturdy table at which manual work is done. They range from simple flat surfaces to very complex designs that may be considered tools in themselves. Workbenches vary in size from tiny jewellers benches to the huge benches used by ...

, or onto a pin board (''assembly board''), according to the design specification, to form the cable harness. After fitting any protective sleeves, conduit, or extruded yarn, the harness is either fitted directly in the vehicle or shipped. In spite of increasing

automation Automation describes a wide range of technologies that reduce human intervention in processes, namely by predetermining decision criteria, subprocess relationships, and related actions, as well as embodying those predeterminations in machines ...

, hand manufacture continues to be the primary method of cable harness production in general, due to the many different processes involved, such as: * routing wires through sleeves, * taping with fabric tape, in particular on branch outs from wire strands, * crimping terminals onto wires, particularly for so-called ''multiple crimps'' (more than one wire into one terminal), * inserting one sleeve into another, * fastening strands with tape, clamps or

cable ties A cable tie (also known as a hose tie, zip tie, or tie wrap) is a type of fastener for holding items together, primarily electrical cables and wires. Because of their low cost, ease of use, and binding strength, cable ties are ubiquitous, findi ...

. It is difficult to automate these processes, with major suppliers still using manual means of production, only automating portions of the process. Manual production remains more cost effective than automation, especially with small batch sizes. Pre-production can be automated in part. This affects: * cutting individual wires (cutting machine), * wire stripping (automated wire stripping machines), * crimping terminals onto one or both sides of the wire, * partial plugging of wires prefitted with terminals into connector housings (''module''), *

soldering Soldering (; ) is a process in which two or more items are joined by melting and putting a filler metal (solder) into the joint, the filler metal having a lower melting point than the adjoining metal. Unlike welding, soldering does not involv ...

of wire ends (solder machine), * twisting wires. A wire harness must also be manufactured with a terminal, defined as "a device designed to terminate a conductor that is to be affixed to a post, stud, chassis, another tongue, etc., to establish an electrical connection." Some types of terminals include ring, tongue, spade, flag, hook, blade, quick-connect, offset and flagged. Once a cable harness has been produced, it is often subject to various tests to ensure its quality and functionality. A test board can be used to measure the harness' electrical capabilities. This is achieved through the input of data about a circuit which one or more cable harnesses will be part of being programmed into the test board. The harness is then measured for its ability to function in the simulated circuit. Miraco Pull Test

Another popular test method for a cable harness is a 'pull test', in which the harness is attached to a machine that pulls the harness at a constant rate. This test then measures the cable harness' strength and electrical conductivity when pulled against a minimum standard to ensure that cable harnesses are consistently effective and safe.

In sound engineering

The cable harnesses used in

sound reinforcement A sound reinforcement system is the combination of microphones, signal processors, amplifiers, and loudspeakers in enclosures all controlled by a mixing console that makes live or pre-recorded sounds louder and may also distribute those sounds ...

and

recording studio A recording studio is a specialized facility for sound recording, mixing, and audio production of instrumental or vocal musical performances, spoken words, and other sounds. They range in size from a small in-home project studio large enoug ...

s are called ''

multicore A multi-core processor is a microprocessor on a single integrated circuit with two or more separate processing units, called cores, each of which reads and executes program instructions. The instructions are ordinary CPU instructions (such a ...

s'', also known as ''snakes'' or ''looms''. They carry audio signals between a

mixing console A mixing console or mixing desk is an electronic device for mixing audio signals, used in sound recording and reproduction and sound reinforcement systems. Inputs to the console include microphones, signals from electric or electronic inst ...

and

stage box A stage box is an interface device used in sound reinforcement and recording studios to connect equipment to a mixing console. It provides a central location to connect microphones, instruments, and speakers to a multicore cable (snake), whic ...

. Modern

digital mixing console In professional audio, a digital mixing console (DMC) is a type of mixing console used to combine, route, and change the dynamics, equalization and other properties of multiple audio input signals, using digital signal processing rather than an ...

s typically use a single

twisted pair Twisted pair cabling is a type of wiring used for communications in which two conductors of a single circuit are twisted together for the purposes of improving electromagnetic compatibility. Compared to a single conductor or an untwisted ba ...

cable rather than a traditional analog multicore.

Industry quality standard

Although customer specifications take the highest priority when creating cable harnesses of a certain quality, in North America if no such specifications are found the quality standards of a cable harness are standardized by the IPC's publication IPC/WHMA-A-620 for minimal requirements for cable harnesses. This publication is reviewed frequently to ensure that the standards published remain of an acceptable standard in light of potential changes to the industry or technology that may occur. The IPC/WHMA-A-620 publication has standards for a wide range of elements within a cable harness, including but not limited to electrostatic discharge protection,

, installation and repairs, crimping, pull-test requirements, and other operations that are critical to the production and function of cable harnesses. The standards mandated by the IPC differ based on a product's classification under one of three defined product classes. These classes are: * Class 1: general electronic products, for objects where the functionality of the final product is the major requirement. This can include objects such as toys and other items that do not serve a critical purpose. * Class 2: dedicated service electronic products, where consistent and extended performance is needed, but uninterrupted service is not vital. The failure of this product would not result in significant failures or danger. * Class 3: high performance electronic products, for products that require continued and consistent performance and where periods of inoperativeness cannot be tolerated. The environment in which these cable harnesses are used may be "uncommonly harsh." This category encompasses devices involved in life support systems or that are used in military.

References

{{reflist Harness, cable