HOME

TheInfoList



OR:

In
fluid dynamics In physics and engineering, fluid dynamics is a subdiscipline of fluid mechanics that describes the flow of fluids— liquids and gases. It has several subdisciplines, including ''aerodynamics'' (the study of air and other gases in motion) an ...
, dynamic pressure (denoted by or and sometimes called velocity pressure) is the quantity defined by:Clancy, L.J., ''Aerodynamics'', Section 3.5 :q = \frac\rho\, u^2 where (in SI units): * is the dynamic
pressure Pressure (symbol: ''p'' or ''P'') is the force applied perpendicular to the surface of an object per unit area over which that force is distributed. Gauge pressure (also spelled ''gage'' pressure)The preferred spelling varies by country and e ...
in
pascals The pascal (symbol: Pa) is the unit of pressure in the International System of Units (SI), and is also used to quantify internal pressure, stress, Young's modulus, and ultimate tensile strength. The unit, named after Blaise Pascal, is defined as ...
(i.e., kg/ ms2), * is the fluid
mass density Density (volumetric mass density or specific mass) is the substance's mass per unit of volume. The symbol most often used for density is ''ρ'' (the lower case Greek letter rho), although the Latin letter ''D'' can also be used. Mathematically ...
(e.g. in kg/m3), and * is the
flow speed In continuum mechanics the flow velocity in fluid dynamics, also macroscopic velocity in statistical mechanics, or drift velocity in electromagnetism, is a vector field used to mathematically describe the motion of a continuum. The length of the f ...
in m/s. It can be thought of as the fluid's
kinetic energy In physics, the kinetic energy of an object is the energy that it possesses due to its motion. It is defined as the work needed to accelerate a body of a given mass from rest to its stated velocity. Having gained this energy during its accele ...
per unit
volume Volume is a measure of occupied three-dimensional space. It is often quantified numerically using SI derived units (such as the cubic metre and litre) or by various imperial or US customary units (such as the gallon, quart, cubic inch). The de ...
. For
incompressible flow In fluid mechanics or more generally continuum mechanics, incompressible flow ( isochoric flow) refers to a flow in which the material density is constant within a fluid parcel—an infinitesimal volume that moves with the flow velocity. An e ...
, the dynamic pressure of a fluid is the difference between its total pressure and
static pressure In fluid mechanics the term static pressure has several uses: * In the design and operation of aircraft, ''static pressure'' is the air pressure in the aircraft's static pressure system. * In fluid dynamics, many authors use the term ''static pres ...
. From
Bernoulli's law In fluid dynamics, Bernoulli's principle states that an increase in the speed of a fluid occurs simultaneously with a decrease in static pressure or a decrease in the fluid's potential energy. The principle is named after the Swiss mathematici ...
, dynamic pressure is given by : p_0 - p_\text = \frac\rho\, u^2 where and are the total and static pressures, respectively.


Physical meaning

Dynamic pressure is the
kinetic energy In physics, the kinetic energy of an object is the energy that it possesses due to its motion. It is defined as the work needed to accelerate a body of a given mass from rest to its stated velocity. Having gained this energy during its accele ...
per unit volume of a fluid. Dynamic pressure is one of the terms of
Bernoulli's equation In fluid dynamics, Bernoulli's principle states that an increase in the speed of a fluid occurs simultaneously with a decrease in static pressure or a decrease in the fluid's potential energy. The principle is named after the Swiss mathematici ...
, which can be derived from the
conservation of energy In physics and chemistry, the law of conservation of energy states that the total energy of an isolated system remains constant; it is said to be ''conserved'' over time. This law, first proposed and tested by Émilie du Châtelet, means th ...
for a fluid in motion. It can also appear as a term in the incompressible Navier-Stokes equation which may be written: :\rho\frac + \rho(\mathbf \cdot \nabla) \mathbf - \rho\nu \,\nabla^2 \mathbf = - \nabla p + \rho\mathbf By a
vector calculus identity The following are important identities involving derivatives and integrals in vector calculus. Operator notation Gradient For a function f(x, y, z) in three-dimensional Cartesian coordinate variables, the gradient is the vector field: \o ...
(u=, \mathbf , ) :\nabla (u^2/2)=(\mathbf\cdot \nabla) \mathbf + \mathbf \times (\nabla \times \mathbf) so that for incompressible,
irrotational flow In vector calculus, a conservative vector field is a vector field that is the gradient of some function. A conservative vector field has the property that its line integral is path independent; the choice of any path between two points does not c ...
(\nabla \times \mathbf=0), the second term on the left in the Navier-Stokes equation is just the gradient of the dynamic pressure. In
hydraulics Hydraulics (from Greek: Υδραυλική) is a technology and applied science using engineering, chemistry, and other sciences involving the mechanical properties and use of liquids. At a very basic level, hydraulics is the liquid counter ...
, the term u^2/2g is known as the hydraulic velocity head (hv) so that the dynamic pressure is equal to \rho g h_v. At a stagnation point the dynamic pressure is equal to the difference between the
stagnation pressure In fluid dynamics, stagnation pressure is the static pressure at a stagnation point in a fluid flow.Clancy, L.J., ''Aerodynamics'', Section 3.5 At a stagnation point the fluid velocity is zero. In an incompressible flow, stagnation pressure is equ ...
and the
static pressure In fluid mechanics the term static pressure has several uses: * In the design and operation of aircraft, ''static pressure'' is the air pressure in the aircraft's static pressure system. * In fluid dynamics, many authors use the term ''static pres ...
, so the dynamic pressure in a flow field can be measured at a stagnation point. Another important aspect of dynamic pressure is that, as
dimensional analysis In engineering and science, dimensional analysis is the analysis of the relationships between different physical quantities by identifying their base quantities (such as length, mass, time, and electric current) and units of measure (such as m ...
shows, the
aerodynamic Aerodynamics, from grc, ἀήρ ''aero'' (air) + grc, δυναμική (dynamics), is the study of the motion of air, particularly when affected by a solid object, such as an airplane wing. It involves topics covered in the field of fluid dyn ...
stress (i.e.
stress Stress may refer to: Science and medicine * Stress (biology), an organism's response to a stressor such as an environmental condition * Stress (linguistics), relative emphasis or prominence given to a syllable in a word, or to a word in a phrase ...
within a structure subject to aerodynamic forces) experienced by an aircraft travelling at speed v is proportional to the air density and square of v, i.e. proportional to q. Therefore, by looking at the variation of q during flight, it is possible to determine how the stress will vary and in particular when it will reach its maximum value. The point of maximum aerodynamic load is often referred to as ''
max q The max q or maximum dynamic pressure condition is the point when an aerospace vehicle's atmospheric flight reaches the maximum difference between the fluid dynamics total pressure and the ambient static pressure. For an airplane, this occurs at ...
'' and it is a critical parameter in many applications, such as launch vehicles.


Uses

The dynamic pressure, along with the static pressure and the pressure due to elevation, is used in
Bernoulli's principle In fluid dynamics, Bernoulli's principle states that an increase in the speed of a fluid occurs simultaneously with a decrease in static pressure or a decrease in the fluid's potential energy. The principle is named after the Swiss mathematici ...
as an
energy balance Energy balance may refer to: * Earth's energy balance, the relationship between incoming solar radiation, outgoing radiation of all types, and global temperature change. * Energy accounting, a system used within industry, where measuring and anal ...
on a
closed system A closed system is a natural physical system that does not allow transfer of matter in or out of the system, although — in contexts such as physics, chemistry or engineering — the transfer of energy (''e.g.'' as work or heat) is allowed. In ...
. The three terms are used to define the state of a closed system of an
incompressible In fluid mechanics or more generally continuum mechanics, incompressible flow ( isochoric flow) refers to a flow in which the material density is constant within a fluid parcel—an infinitesimal volume that moves with the flow velocity. An e ...
, constant-density fluid. When the dynamic pressure is divided by the product of fluid density and acceleration due to gravity, g, the result is called
velocity head Hydraulic head or piezometric head is a specific measurement of liquid pressure above a vertical datum., 410 pages. See pp. 43–44., 650 pages. See p. 22. It is usually measured as a liquid surface elevation, expressed in units of length, ...
, which is used in head equations like the one used for
pressure head In fluid mechanics, pressure head is the height of a liquid column that corresponds to a particular pressure exerted by the liquid column on the base of its container. It may also be called static pressure head or simply static head (but not ''sta ...
and
hydraulic head Hydraulic head or piezometric head is a specific measurement of liquid pressure above a vertical datum., 410 pages. See pp. 43–44., 650 pages. See p. 22. It is usually measured as a liquid surface elevation, expressed in units of length, ...
. In a venturi flow meter, the ''differential pressure head'' can be used to calculate the ''differential velocity head'', which are equivalent in the adjacent picture. An alternative to ''velocity head'' is ''dynamic head''.


Compressible flow

Many authors define ''dynamic pressure'' only for incompressible flows. (For compressible flows, these authors use the concept of
impact pressure In compressible fluid dynamics, impact pressure (dynamic pressure) is the difference between total pressure (also known as pitot pressure or stagnation pressure) and static pressure. In aerodynamics notation, this quantity is denoted as q_c or Q_c. ...
.) However, the definition of ''dynamic pressure'' can be extended to include compressible flows."the dynamic pressure is equal to ''half rho vee squared'' only in incompressible flow."
Houghton, E.L. and Carpenter, P.W. (1993), ''Aerodynamics for Engineering Students'', Section 2.3.1
For compressible flow the isentropic relations can be used (also valid for incompressible flow): q=p_s\left(1+\fracM^2\right)^-p_s Where: :


See also

*
Pressure Pressure (symbol: ''p'' or ''P'') is the force applied perpendicular to the surface of an object per unit area over which that force is distributed. Gauge pressure (also spelled ''gage'' pressure)The preferred spelling varies by country and e ...
*
Pressure head In fluid mechanics, pressure head is the height of a liquid column that corresponds to a particular pressure exerted by the liquid column on the base of its container. It may also be called static pressure head or simply static head (but not ''sta ...
*
Hydraulic head Hydraulic head or piezometric head is a specific measurement of liquid pressure above a vertical datum., 410 pages. See pp. 43–44., 650 pages. See p. 22. It is usually measured as a liquid surface elevation, expressed in units of length, ...
*
Total dynamic head In fluid dynamics, total dynamic head (TDH) is the total equivalent height that a fluid is to be pumped, taking into account friction losses in the pipe. : {\rm h_{total} = \frac{P_2-P_1}{\rho g} + \frac{{v_2}^2-{v_1}^2}{2g : TDH = Static Heigh ...
* Drag,
lift Lift or LIFT may refer to: Physical devices * Elevator, or lift, a device used for raising and lowering people or goods ** Paternoster lift, a type of lift using a continuous chain of cars which do not stop ** Patient lift, or Hoyer lift, mobile ...
and
pitching moment coefficient In aerodynamics, the pitching moment on an airfoil is the moment (or torque) produced by the aerodynamic force on the airfoil if that aerodynamic force is considered to be applied, not at the center of pressure, but at the aerodynamic center ...
s * Derivations of Bernoulli equation


References

*
L. J. Clancy Laurence Joseph Clancy (15 March 1929 - 16 October 2014) was an Education Officer in aerodynamics at Royal Air Force College Cranwell whose textbook ''Aerodynamics'' became standard. He was born in Egypt to Alfred Joseph Clancy and Agnes Hunter. I ...
(1975), ''Aerodynamics'', Pitman Publishing Limited, London. * Houghton, E.L. and Carpenter, P.W. (1993), ''Aerodynamics for Engineering Students'', Butterworth and Heinemann, Oxford UK. *


Notes

{{reflist


External links

* Definition of dynamic pressure o
''Eric Weisstein's World of Science''
Fluid dynamics