A vise or vice (British English) is a mechanical apparatus used to secure an object to allow work to be performed on it. Vises have two parallel jaws, one fixed and the other movable, threaded in and out by a screw and lever. A

vise grip Locking pliers (also called Vise-Grips, a vice grip, Mole wrench or mole grips) are pliers that can be locked into position, using an "over-center" cam action. Locking pliers are available with many different jaw styles, such as needle-nose pli ...

is not a vise but a pair of lever-actuated locking pliers.

Types

Face

A face vise is the standard woodworking vise, always securely attached to a workbench flush with its work surface. Its jaws are made of wood or metal, the latter usually faced with wood, called cheeks, to avoid marring the work. The movable jaw may include a retractable dog to hold work against a

bench dog A bench dog is a removable clamp used on a woodworking workbench to hold an item fast while being worked. It is characteristically used in concert with an adjustable dog on a bench vise, allowing an item compressed between the two to be held fa ...

. A "quick-release" woodworker's vise employs a

split nut A split nut is a nut that is split lengthwise into two pieces (opposed halves) so that its female thread may be opened and closed over the male thread of a bolt or leadscrew. This allows the nut, when open, to move along the screw without the scr ...

that allows the screw to engage or disengage with a half-turn of the handle. When disengaged the movable jaw may be moved in or out throughout its entire range of motion, vastly speeding up the process of adjustment. Common thread types are

Acme Acme is Ancient Greek (ακμή; English transliteration: ''akmē'') for "the peak", "zenith" or "prime". It may refer to: Arts and entertainment * ''Acme'' (album), an album by the Jon Spencer Blues Explosion * Acme and Septimius, a fictional ...

and buttress. Traditional woodworking workbench vises are commonly either face vises, attached to the front of the workbench near the left end of its long side (for a right-handed worker), or end (or tail) vises, attached to or forming part of the right side of the narrow end of the bench.

Engineer's

An engineer's vise, also known as a '' metalworking vise'', ''

machinist A machinist is a tradesperson or trained professional who not only operates machine tools, but also has the knowledge of tooling and materials required to create set ups on machine tools such as milling machines, grinders, lathes, and drilling ...

's vise'', or, informally, a "bench vise", is used to clamp metal instead of wood. It is used to hold metal when filing or cutting. It is sometimes made of cast steel or

malleable cast iron Malleable iron is cast as white iron, the structure being a metastable carbide in a pearlitic matrix. Through an annealing heat treatment, the brittle structure as first cast is transformed into the malleable form. Carbon agglomerates into small ...

, but most are made of cast iron. The jaws are often separate and replaceable, usually engraved with serrated or diamond teeth. Soft jaw covers made of aluminum, copper, wood (for woodworking) or plastic may be used to protect delicate work. The jaw opening of an engineer's vise generally equals its jaw width, though it may be wider. An engineer's vise is bolted onto the top surface of a workbench, with the face of the fixed jaw just forward of its front edge. The vise may include other features such as a small

anvil An anvil is a metalworking tool consisting of a large block of metal (usually forged or cast steel), with a flattened top surface, upon which another object is struck (or "worked"). Anvils are as massive as practical, because the higher th ...

on the back of its body. Most engineer's vises have a swivel base. Some engineer's vises marketed as "homeowner grade" are made of pot metal or a very low grade of iron. Many homeowner's bench vises have an exposed screw.

Variants

=Combination

= A combination-vise combines an engineer-style vise with a subsidiary set of curved serrated jaws below the main for clamping pipe. A pivoting base is standard.

=Clamp-on

= A clamp-on vise is a light-duty bench vise secured to a board, table, or bench by a vise-type screw on its base. Rarely pivot.

=Vacuum-mounted

A vacuum-mounted vise is a small engineer's vise secured by a suction cup base and used by hobbyists for very light duty work. No pivot.

Machine

Machine vises are mounted on drill presses, grinding machines and

milling Milling may refer to: * Milling (minting), forming narrow ridges around the edge of a coin * Milling (grinding), breaking solid materials into smaller pieces by grinding, crushing, or cutting in a mill * Milling (machining), a process of using rota ...

machines. Abrasive chop saws have a coarse-threaded or cam-actuated machine-type vise built into the saw. Image:ViceDrill-4inch.jpg, A small machine vise used in a drill press Image:TruLockMachineVice.jpg, A machine vise that can be rotated Image:Soft Jaw Used on CNC Mill Full.jpg, Aluminum soft jaw shown holding five parts at a time in a CNC milling machine

Pipe

A pipe vise is used by a plumber to hold pipes for threading and cutting. There are two main styles, yoke and chain. The yoke uses a top-mounted screw to clamp the pipe between two fixed angled jaws at its base; the chain style secures the pipe by wrapping it within a chain designed to adjust to length by link, tightened by a cam lever.

Other

Other kinds of vise include: * Hand vise * Compound slide vise; a more complex machine vise. It allows speed and precision in the placement of the work. * Cross vise, which can be adjusted using

leadscrew A leadscrew (or lead screw), also known as a power screw or translation screw,Bhandari, p. 202. is a screw (simple machine), screw used as a linkage (mechanical), linkage in a machine, to translate Rotation, turning motion into linear motion. ...

s in the X and Y axes; these are useful if many holes need to be drilled in the same workpiece using a drill press. Compare router table. * Off-center vise * Angle vise, with two jaws closing against a right angle * Sine vise, which use gauge blocks to set up a highly accurate angle * Rotary vise * Diemakers' vise * Saw vise – used for sharpening hand saws * Pin vise (for holding thin, long cylindrical objects by one end, or used as a drill (scale modeler's pin vise)) * Jewellers' vise * Fly tying vise, used to secure fishing hook in fly tying * Leg vise or post vise, which is attached to a bench but also supported from the ground so as to be stable under very heavy use, as by an auto body repairman or blacksmith * Shaker broom vise * Rigging vise, otherwise known as a triangle vise or splicing vise, which has three jaws. Used to close thimbles and splice rope, cable, and wire rope. * Mantle Vise, more recently referred to as a Fractal Vise, used to hold workpieces with complex forms

References

Notes

Citations

{{Measuring and alignment tools Metalworking hand tools Woodworking clamps