HOME

TheInfoList



OR:

In
geometry Geometry (; ) is, with arithmetic, one of the oldest branches of mathematics. It is concerned with properties of space such as the distance, shape, size, and relative position of figures. A mathematician who works in the field of geometry is ...
, a uniform 4-polytope (or uniform polychoron) is a 4-dimensional
polytope In elementary geometry, a polytope is a geometric object with flat sides ('' faces''). Polytopes are the generalization of three-dimensional polyhedra to any number of dimensions. Polytopes may exist in any general number of dimensions as an ...
which is
vertex-transitive In geometry, a polytope (e.g. a polygon or polyhedron) or a tiling is isogonal or vertex-transitive if all its vertices are equivalent under the symmetries of the figure. This implies that each vertex is surrounded by the same kinds of face in ...
and whose cells are
uniform polyhedra In geometry, a uniform polyhedron has regular polygons as faces and is vertex-transitive (i.e., there is an isometry mapping any vertex onto any other). It follows that all vertices are congruent. Uniform polyhedra may be regular (if also ...
, and faces are
regular polygon In Euclidean geometry, a regular polygon is a polygon that is direct equiangular (all angles are equal in measure) and equilateral (all sides have the same length). Regular polygons may be either convex, star or skew. In the limit, a sequence ...
s. There are 47 non- prismatic
convex Convex or convexity may refer to: Science and technology * Convex lens, in optics Mathematics * Convex set, containing the whole line segment that joins points ** Convex polygon, a polygon which encloses a convex set of points ** Convex polytop ...
uniform 4-polytopes. There are two infinite sets of convex prismatic forms, along with 17 cases arising as prisms of the convex uniform polyhedra. There are also an unknown number of non-convex star forms.


History of discovery

* Convex
Regular polytope In mathematics, a regular polytope is a polytope whose symmetry group acts transitively on its flags, thus giving it the highest degree of symmetry. All its elements or -faces (for all , where is the dimension of the polytope) — cells, ...
s: ** 1852:
Ludwig Schläfli Ludwig Schläfli (15 January 1814 – 20 March 1895) was a Swiss mathematician, specialising in geometry and complex analysis (at the time called function theory) who was one of the key figures in developing the notion of higher-dimensional space ...
proved in his manuscript ''Theorie der vielfachen Kontinuität'' that there are exactly 6 regular polytopes in 4
dimension In physics and mathematics, the dimension of a mathematical space (or object) is informally defined as the minimum number of coordinates needed to specify any point within it. Thus, a line has a dimension of one (1D) because only one coor ...
s and only 3 in 5 or more dimensions. * Regular star 4-polytopes (
star polyhedron In geometry, a star polyhedron is a polyhedron which has some repetitive quality of nonconvexity giving it a star-like visual quality. There are two general kinds of star polyhedron: *Polyhedra which self-intersect in a repetitive way. *Concave p ...
cells and/or
vertex figure In geometry, a vertex figure, broadly speaking, is the figure exposed when a corner of a polyhedron or polytope is sliced off. Definitions Take some corner or vertex of a polyhedron. Mark a point somewhere along each connected edge. Draw line ...
s) ** 1852:
Ludwig Schläfli Ludwig Schläfli (15 January 1814 – 20 March 1895) was a Swiss mathematician, specialising in geometry and complex analysis (at the time called function theory) who was one of the key figures in developing the notion of higher-dimensional space ...
also found 4 of the 10 regular star 4-polytopes, discounting 6 with cells or vertex figures and . ** 1883:
Edmund Hess Edmund Hess (17 February 1843 – 24 December 1903) was a German mathematician who discovered several regular polytopes. See also * Schläfli–Hess polychoron * Hess polytope References * ''Regular Polytopes In mathematics, a re ...
completed the list of 10 of the nonconvex regular 4-polytopes, in his book (in German) ''Einleitung in die Lehre von der Kugelteilung mit besonderer Berücksichtigung ihrer Anwendung auf die Theorie der Gleichflächigen und der gleicheckigen Polyeder'

* Convex
semiregular polytope In geometry, by Thorold Gosset's definition a semiregular polytope is usually taken to be a polytope that is vertex-transitive and has all its facets being regular polytopes. E.L. Elte compiled a longer list in 1912 as ''The Semiregular Polyt ...
s: (Various definitions before Coxeter's uniform category) ** 1900:
Thorold Gosset John Herbert de Paz Thorold Gosset (16 October 1869 – December 1962) was an English lawyer and an amateur mathematician. In mathematics, he is noted for discovering and classifying the semiregular polytopes in dimensions four and higher, a ...
enumerated the list of nonprismatic semiregular convex polytopes with regular cells (
Platonic solid In geometry, a Platonic solid is a convex, regular polyhedron in three-dimensional Euclidean space. Being a regular polyhedron means that the faces are congruent (identical in shape and size) regular polygons (all angles congruent and all e ...
s) in his publication ''On the Regular and Semi-Regular Figures in Space of n Dimensions''. In four dimensions, this gives the
rectified 5-cell In four-dimensional geometry, the rectified 5-cell is a uniform 4-polytope composed of 5 regular tetrahedral and 5 regular octahedral cells. Each edge has one tetrahedron and two octahedra. Each vertex has two tetrahedra and three octahedra. In t ...
, the
rectified 600-cell In geometry, the rectified 600-cell or rectified hexacosichoron is a convex uniform 4-polytope composed of 600 regular octahedra and 120 icosahedra cells. Each edge has two octahedra and one icosahedron. Each vertex has five octahedra and two icos ...
, and the
snub 24-cell In geometry, the snub 24-cell or snub disicositetrachoron is a convex uniform 4-polytope composed of 120 regular tetrahedral and 24 icosahedral cells. Five tetrahedra and three icosahedra meet at each vertex. In total it has 480 triangular faces ...
. ** 1910: Alicia Boole Stott, in her publication ''Geometrical deduction of semiregular from regular polytopes and space fillings'', expanded the definition by also allowing Archimedean solid and
prism Prism usually refers to: * Prism (optics), a transparent optical component with flat surfaces that refract light * Prism (geometry), a kind of polyhedron Prism may also refer to: Science and mathematics * Prism (geology), a type of sedimentary ...
cells. This construction enumerated 45 semiregular 4-polytopes, corresponding to the nonprismatic forms listed below. The snub 24-cell and
grand antiprism In geometry, the grand antiprism or pentagonal double antiprismoid is a uniform 4-polytope (4-dimensional uniform polytope) bounded by 320 cells: 20 pentagonal antiprisms, and 300 tetrahedra. It is an anomalous, non-Wythoffian uniform 4-polytope ...
were missing from her list. ** 1911: Pieter Hendrik Schoute published ''Analytic treatment of the polytopes regularly derived from the regular polytopes'', followed Boole-Stott's notations, enumerating the convex uniform polytopes by symmetry based on
5-cell In geometry, the 5-cell is the convex 4-polytope with Schläfli symbol . It is a 5-vertex four-dimensional object bounded by five tetrahedral cells. It is also known as a C5, pentachoron, pentatope, pentahedroid, or tetrahedral pyramid. It i ...
, 8-cell/
16-cell In geometry, the 16-cell is the regular convex 4-polytope (four-dimensional analogue of a Platonic solid) with Schläfli symbol . It is one of the six regular convex 4-polytopes first described by the Swiss mathematician Ludwig Schläfli in the ...
, and
24-cell In geometry, the 24-cell is the convex regular 4-polytope (four-dimensional analogue of a Platonic solid) with Schläfli symbol . It is also called C24, or the icositetrachoron, octaplex (short for "octahedral complex"), icosatetrahedroid, o ...
. ** 1912: E. L. Elte independently expanded on Gosset's list with the publication ''The Semiregular Polytopes of the Hyperspaces'', polytopes with one or two types of semiregular facets. * Convex uniform polytopes: **1940: The search was expanded systematically by H.S.M. Coxeter in his publication ''Regular and Semi-Regular Polytopes''. ** Convex uniform 4-polytopes: ***1965: The complete list of convex forms was finally enumerated by
John Horton Conway John Horton Conway (26 December 1937 – 11 April 2020) was an English mathematician active in the theory of finite groups, knot theory, number theory, combinatorial game theory and coding theory. He also made contributions to many branches ...
and Michael Guy, in their publication ''Four-Dimensional Archimedean Polytopes'', established by computer analysis, adding only one non-Wythoffian convex 4-polytope, the grand antiprism. *** 1966 Norman Johnson completes his Ph.D. dissertation ''The Theory of Uniform Polytopes and Honeycombs'' under advisor Coxeter, completes the basic theory of uniform polytopes for dimensions 4 and higher. *** 1986 Coxeter published a paper ''Regular and Semi-Regular Polytopes II'' which included analysis of the unique
snub 24-cell In geometry, the snub 24-cell or snub disicositetrachoron is a convex uniform 4-polytope composed of 120 regular tetrahedral and 24 icosahedral cells. Five tetrahedra and three icosahedra meet at each vertex. In total it has 480 triangular faces ...
structure, and the symmetry of the anomalous grand antiprism. *** 1998-2000: The 4-polytopes were systematically named by Norman Johnson, and given by George Olshevsky's online indexed enumeration (used as a basis for this listing). Johnson named the 4-polytopes as polychora, like polyhedra for 3-polytopes, from the
Greek Greek may refer to: Greece Anything of, from, or related to Greece, a country in Southern Europe: *Greeks, an ethnic group. *Greek language, a branch of the Indo-European language family. **Proto-Greek language, the assumed last common ancestor ...
roots ''poly'' ("many") and ''choros'' ("room" or "space"). The names of the uniform polychora started with the 6 regular polychora with prefixes based on rings in the Coxeter diagrams; truncation t0,1, cantellation, t0,2, runcination t0,3, with single ringed forms called rectified, and bi,tri-prefixes added when the first ring was on the second or third nodes.Johnson (2015), Chapter 11, section 11.5 Spherical Coxeter groups, 11.5.5 ''full polychoric groups'' *** 2004: A proof that the Conway-Guy set is complete was published by Marco Möller in his dissertation, ''Vierdimensionale Archimedische Polytope''. Möller reproduced Johnson's naming system in his listing. *** 2008: ''The Symmetries of Things'' was published by John H. Conway and contains the first print-published listing of the convex uniform 4-polytopes and higher dimensional polytopes by Coxeter group family, with general
vertex figure In geometry, a vertex figure, broadly speaking, is the figure exposed when a corner of a polyhedron or polytope is sliced off. Definitions Take some corner or vertex of a polyhedron. Mark a point somewhere along each connected edge. Draw line ...
diagrams for each ringed
Coxeter diagram Harold Scott MacDonald "Donald" Coxeter, (9 February 1907 – 31 March 2003) was a British and later also Canadian geometer. He is regarded as one of the greatest geometers of the 20th century. Biography Coxeter was born in Kensington t ...
permutation—snub, grand antiprism, and duoprisms—which he called proprisms for product prisms. He used his own ''ijk''-ambo naming scheme for the indexed ring permutations beyond truncation and bitruncation, and all of Johnson's names were included in the book index. * Nonregular uniform star 4-polytopes: (similar to the nonconvex uniform polyhedra) **1966: Johnson describes three nonconvex uniform antiprisms in 4-space in his dissertation. **1990-2006: In a collaborative search, up to 2005 a total of 1845 uniform 4-polytopes (convex and nonconvex) had been identified by Jonathan Bowers and George Olshevsky, with an additional four discovered in 2006 for a total of 1849. The count includes the 74 prisms of the 75 non-prismatic uniform polyhedra (since that is a finite set – the cubic prism is excluded as it duplicates the tesseract), but not the infinite categories of duoprisms or prisms of antiprisms. **2020-2021: 340 new polychora were found, bringing up the total number of known uniform 4-polytopes to 2189. The list has not been proven complete.


Regular 4-polytopes

Regular 4-polytopes are a subset of the uniform 4-polytopes, which satisfy additional requirements. Regular 4-polytopes can be expressed with Schläfli symbol have cells of type , faces of type , edge figures , and
vertex figure In geometry, a vertex figure, broadly speaking, is the figure exposed when a corner of a polyhedron or polytope is sliced off. Definitions Take some corner or vertex of a polyhedron. Mark a point somewhere along each connected edge. Draw line ...
s . The existence of a regular 4-polytope is constrained by the existence of the regular polyhedra which becomes cells, and which becomes the
vertex figure In geometry, a vertex figure, broadly speaking, is the figure exposed when a corner of a polyhedron or polytope is sliced off. Definitions Take some corner or vertex of a polyhedron. Mark a point somewhere along each connected edge. Draw line ...
. Existence as a finite 4-polytope is dependent upon an inequality: :\sin \left ( \frac \right ) \sin \left(\frac\right) > \cos\left(\frac\right). The 16 regular 4-polytopes, with the property that all cells, faces, edges, and vertices are congruent: * 6
regular convex 4-polytope In mathematics, a regular 4-polytope is a regular four-dimensional polytope. They are the four-dimensional analogues of the regular polyhedra in three dimensions and the regular polygons in two dimensions. There are six convex and ten star reg ...
s:
5-cell In geometry, the 5-cell is the convex 4-polytope with Schläfli symbol . It is a 5-vertex four-dimensional object bounded by five tetrahedral cells. It is also known as a C5, pentachoron, pentatope, pentahedroid, or tetrahedral pyramid. It i ...
, 8-cell ,
16-cell In geometry, the 16-cell is the regular convex 4-polytope (four-dimensional analogue of a Platonic solid) with Schläfli symbol . It is one of the six regular convex 4-polytopes first described by the Swiss mathematician Ludwig Schläfli in the ...
,
24-cell In geometry, the 24-cell is the convex regular 4-polytope (four-dimensional analogue of a Platonic solid) with Schläfli symbol . It is also called C24, or the icositetrachoron, octaplex (short for "octahedral complex"), icosatetrahedroid, o ...
,
120-cell In geometry, the 120-cell is the convex regular 4-polytope (four-dimensional analogue of a Platonic solid) with Schläfli symbol . It is also called a C120, dodecaplex (short for "dodecahedral complex"), hyperdodecahedron, polydodecahedron, hec ...
, and
600-cell In geometry, the 600-cell is the convex regular 4-polytope (four-dimensional analogue of a Platonic solid) with Schläfli symbol . It is also known as the C600, hexacosichoron and hexacosihedroid. It is also called a tetraplex (abbreviated from ...
. * 10 regular star 4-polytopes: icosahedral 120-cell ,
small stellated 120-cell In geometry, the small stellated 120-cell or stellated polydodecahedron is a regular star 4-polytope with Schläfli symbol . It is one of 10 regular Schläfli-Hess polytopes. Related polytopes It has the same edge arrangement as the great gran ...
, great 120-cell , grand 120-cell , great stellated 120-cell , grand stellated 120-cell , great grand 120-cell , great icosahedral 120-cell , grand 600-cell , and great grand stellated 120-cell .


Convex uniform 4-polytopes


Symmetry of uniform 4-polytopes in four dimensions

There are 5 fundamental mirror symmetry point group families in 4-dimensions: A4 = , B4 = , D4 = , F4 = , H4 = . There are also 3 prismatic groups A3A1 = , B3A1 = , H3A1 = , and duoprismatic groups: I2(p)×I2(q) = . Each group defined by a
Goursat tetrahedron In geometry, a Goursat tetrahedron is a tetrahedral fundamental domain of a Wythoff construction. Each tetrahedral face represents a reflection hyperplane on 3-dimensional surfaces: the 3-sphere, Euclidean 3-space, and hyperbolic 3-space. Coxeter n ...
fundamental domain bounded by mirror planes. Each reflective uniform 4-polytope can be constructed in one or more reflective point group in 4 dimensions by a
Wythoff construction In geometry, a Wythoff construction, named after mathematician Willem Abraham Wythoff, is a method for constructing a uniform polyhedron or plane tiling. It is often referred to as Wythoff's kaleidoscopic construction. Construction process ...
, represented by rings around permutations of nodes in a
Coxeter diagram Harold Scott MacDonald "Donald" Coxeter, (9 February 1907 – 31 March 2003) was a British and later also Canadian geometer. He is regarded as one of the greatest geometers of the 20th century. Biography Coxeter was born in Kensington t ...
. Mirror hyperplanes can be grouped, as seen by colored nodes, separated by even-branches. Symmetry groups of the form ,b,a have an extended symmetry, a,b,a, doubling the symmetry order. This includes ,3,3 ,4,3 and 'p'',2,''p'' Uniform polytopes in these group with symmetric rings contain this extended symmetry. If all mirrors of a given color are unringed (inactive) in a given uniform polytope, it will have a lower symmetry construction by removing all of the inactive mirrors. If all the nodes of a given color are ringed (active), an alternation operation can generate a new 4-polytope with chiral symmetry, shown as "empty" circled nodes", but the geometry is not generally adjustable to create uniform solutions.


Enumeration

There are 64 convex uniform 4-polytopes, including the 6 regular convex 4-polytopes, and excluding the infinite sets of the
duoprism In geometry of 4 dimensions or higher, a double prism or duoprism is a polytope resulting from the Cartesian product of two polytopes, each of two dimensions or higher. The Cartesian product of an -polytope and an -polytope is an -polytope, wher ...
s and the antiprismatic prisms. * 5 are polyhedral prisms based on the
Platonic solid In geometry, a Platonic solid is a convex, regular polyhedron in three-dimensional Euclidean space. Being a regular polyhedron means that the faces are congruent (identical in shape and size) regular polygons (all angles congruent and all e ...
s (1 overlap with regular since a cubic hyperprism is a
tesseract In geometry, a tesseract is the four-dimensional analogue of the cube; the tesseract is to the cube as the cube is to the square. Just as the surface of the cube consists of six square faces, the hypersurface of the tesseract consists of e ...
) * 13 are polyhedral prisms based on the Archimedean solids * 9 are in the self-dual regular A4 ,3,3group (
5-cell In geometry, the 5-cell is the convex 4-polytope with Schläfli symbol . It is a 5-vertex four-dimensional object bounded by five tetrahedral cells. It is also known as a C5, pentachoron, pentatope, pentahedroid, or tetrahedral pyramid. It i ...
) family. * 9 are in the self-dual regular F4 ,4,3group (
24-cell In geometry, the 24-cell is the convex regular 4-polytope (four-dimensional analogue of a Platonic solid) with Schläfli symbol . It is also called C24, or the icositetrachoron, octaplex (short for "octahedral complex"), icosatetrahedroid, o ...
) family. (Excluding snub 24-cell) * 15 are in the regular B4 ,3,4group (
tesseract In geometry, a tesseract is the four-dimensional analogue of the cube; the tesseract is to the cube as the cube is to the square. Just as the surface of the cube consists of six square faces, the hypersurface of the tesseract consists of e ...
/
16-cell In geometry, the 16-cell is the regular convex 4-polytope (four-dimensional analogue of a Platonic solid) with Schläfli symbol . It is one of the six regular convex 4-polytopes first described by the Swiss mathematician Ludwig Schläfli in the ...
) family (3 overlap with 24-cell family) * 15 are in the regular H4 ,3,5group (
120-cell In geometry, the 120-cell is the convex regular 4-polytope (four-dimensional analogue of a Platonic solid) with Schläfli symbol . It is also called a C120, dodecaplex (short for "dodecahedral complex"), hyperdodecahedron, polydodecahedron, hec ...
/
600-cell In geometry, the 600-cell is the convex regular 4-polytope (four-dimensional analogue of a Platonic solid) with Schläfli symbol . It is also known as the C600, hexacosichoron and hexacosihedroid. It is also called a tetraplex (abbreviated from ...
) family. * 1 special snub form in the ,4,3group (
24-cell In geometry, the 24-cell is the convex regular 4-polytope (four-dimensional analogue of a Platonic solid) with Schläfli symbol . It is also called C24, or the icositetrachoron, octaplex (short for "octahedral complex"), icosatetrahedroid, o ...
) family. * 1 special non-Wythoffian 4-polytope, the grand antiprism. * TOTAL: 68 − 4 = 64 These 64 uniform 4-polytopes are indexed below by George Olshevsky. Repeated symmetry forms are indexed in brackets. In addition to the 64 above, there are 2 infinite prismatic sets that generate all of the remaining convex forms: * Set of
uniform antiprismatic prism In 4-dimensional geometry, a uniform antiprismatic prism or antiduoprism is a uniform 4-polytope with two uniform antiprism cells in two parallel 3-space hyperplanes, connected by uniform prisms cells between pairs of faces. The symmetry of a ' ...
s - sr× - Polyhedral prisms of two
antiprisms In geometry, an antiprism or is a polyhedron composed of two parallel direct copies (not mirror images) of an polygon, connected by an alternating band of triangles. They are represented by the Conway notation . Antiprisms are a subclass o ...
. * Set of uniform
duoprism In geometry of 4 dimensions or higher, a double prism or duoprism is a polytope resulting from the Cartesian product of two polytopes, each of two dimensions or higher. The Cartesian product of an -polytope and an -polytope is an -polytope, wher ...
s - × - A Cartesian product of two polygons.


The A4 family

The 5-cell has ''diploid pentachoric'' ,3,3symmetry, of order 120, isomorphic to the permutations of five elements, because all pairs of vertices are related in the same way. Facets (cells) are given, grouped in their Coxeter diagram locations by removing specified nodes. The three uniform 4-polytopes forms marked with an asterisk, *, have the higher extended pentachoric symmetry, of order 240, because the element corresponding to any element of the underlying 5-cell can be exchanged with one of those corresponding to an element of its dual. There is one small index subgroup ,3,3sup>+, order 60, or its doubling +, order 120, defining an omnisnub 5-cell which is listed for completeness, but is not uniform.


The B4 family

This family has ''diploid hexadecachoric'' symmetry, ,3,3 of order 24×16=384: 4!=24 permutations of the four axes, 24=16 for reflection in each axis. There are 3 small index subgroups, with the first two generate uniform 4-polytopes which are also repeated in other families, +,4,3,3 ,(3,3)+ and ,3,3sup>+, all order 192.


Tesseract truncations


16-cell truncations

:(*) Just as rectifying the
tetrahedron In geometry, a tetrahedron (plural: tetrahedra or tetrahedrons), also known as a triangular pyramid, is a polyhedron composed of four triangular faces, six straight edges, and four vertex corners. The tetrahedron is the simplest of all th ...
produces the
octahedron In geometry, an octahedron (plural: octahedra, octahedrons) is a polyhedron with eight faces. The term is most commonly used to refer to the regular octahedron, a Platonic solid composed of eight equilateral triangles, four of which meet at ea ...
, rectifying the 16-cell produces the 24-cell, the regular member of the following family. The ''snub 24-cell'' is repeat to this family for completeness. It is an alternation of the ''cantitruncated 16-cell'' or ''truncated 24-cell'', with the half symmetry group 3,3)+,4 The truncated octahedral cells become icosahedra. The cubes becomes tetrahedra, and 96 new tetrahedra are created in the gaps from the removed vertices.


The F4 family

This family has ''diploid icositetrachoric'' symmetry, ,4,3 of order 24×48=1152: the 48 symmetries of the octahedron for each of the 24 cells. There are 3 small index subgroups, with the first two isomorphic pairs generating uniform 4-polytopes which are also repeated in other families, +,4,3 ,4,3+ and ,4,3sup>+, all order 576. : (†) The snub 24-cell here, despite its common name, is not analogous to the
snub cube In geometry, the snub cube, or snub cuboctahedron, is an Archimedean solid with 38 faces: 6 squares and 32 equilateral triangles. It has 60 edges and 24 vertices. It is a chiral polyhedron; that is, it has two distinct forms, which are mirr ...
; rather, it is derived by an alternation of the truncated 24-cell. Its
symmetry number The symmetry number or symmetry order of an object is the number of different but indistinguishable (or equivalent) arrangements (or views) of the object, that is, it is the order of its symmetry group. The object can be a molecule, crystal lattice ...
is only 576, (the ''ionic diminished icositetrachoric'' group, +,4,3. Like the 5-cell, the 24-cell is self-dual, and so the following three forms have twice as many symmetries, bringing their total to 2304 ( extended icositetrachoric symmetry ).


The H4 family

This family has ''diploid hexacosichoric'' symmetry, ,3,3 of order 120×120=24×600=14400: 120 for each of the 120 dodecahedra, or 24 for each of the 600 tetrahedra. There is one small index subgroups ,3,3sup>+, all order 7200.


120-cell truncations


600-cell truncations


The D4 family

This demitesseract family, 1,1,1 introduces no new uniform 4-polytopes, but it is worthy to repeat these alternative constructions. This family has order 12×16=192: 4!/2=12 permutations of the four axes, half as alternated, 24=16 for reflection in each axis. There is one small index subgroups that generating uniform 4-polytopes, 1,1,1sup>+, order 96. When the 3 bifurcated branch nodes are identically ringed, the symmetry can be increased by 6, as [31,1,1 = ,4,3 and thus these polytopes are repeated from the
24-cell In geometry, the 24-cell is the convex regular 4-polytope (four-dimensional analogue of a Platonic solid) with Schläfli symbol . It is also called C24, or the icositetrachoron, octaplex (short for "octahedral complex"), icosatetrahedroid, o ...
family. Here again the ''snub 24-cell'', with the symmetry group 1,1,1sup>+ this time, represents an alternated truncation of the truncated 24-cell creating 96 new tetrahedra at the position of the deleted vertices. In contrast to its appearance within former groups as partly snubbed 4-polytope, only within this symmetry group it has the full analogy to the Kepler snubs, i.e. the
snub cube In geometry, the snub cube, or snub cuboctahedron, is an Archimedean solid with 38 faces: 6 squares and 32 equilateral triangles. It has 60 edges and 24 vertices. It is a chiral polyhedron; that is, it has two distinct forms, which are mirr ...
and the snub dodecahedron.


The grand antiprism

There is one non-Wythoffian uniform convex 4-polytope, known as the
grand antiprism In geometry, the grand antiprism or pentagonal double antiprismoid is a uniform 4-polytope (4-dimensional uniform polytope) bounded by 320 cells: 20 pentagonal antiprisms, and 300 tetrahedra. It is an anomalous, non-Wythoffian uniform 4-polytope ...
, consisting of 20
pentagonal antiprism In geometry, the pentagonal antiprism is the third in an infinite set of antiprisms formed by an even-numbered sequence of triangle sides closed by two polygon caps. It consists of two pentagons joined to each other by a ring of 10 triangles for ...
s forming two perpendicular rings joined by 300
tetrahedra In geometry, a tetrahedron (plural: tetrahedra or tetrahedrons), also known as a triangular pyramid, is a polyhedron composed of four triangular faces, six straight edges, and four vertex corners. The tetrahedron is the simplest of all the o ...
. It is loosely analogous to the three-dimensional
antiprism In geometry, an antiprism or is a polyhedron composed of two parallel direct copies (not mirror images) of an polygon, connected by an alternating band of triangles. They are represented by the Conway notation . Antiprisms are a subclass o ...
s, which consist of two parallel
polygon In geometry, a polygon () is a plane figure that is described by a finite number of straight line segments connected to form a closed ''polygonal chain'' (or ''polygonal circuit''). The bounded plane region, the bounding circuit, or the two to ...
s joined by a band of
triangle A triangle is a polygon with three edges and three vertices. It is one of the basic shapes in geometry. A triangle with vertices ''A'', ''B'', and ''C'' is denoted \triangle ABC. In Euclidean geometry, any three points, when non- colline ...
s. Unlike them, however, the grand antiprism is not a member of an infinite family of uniform polytopes. Its symmetry is the ''ionic diminished Coxeter group'', 10,2+,10, order 400.


Prismatic uniform 4-polytopes

A prismatic polytope is a Cartesian product of two polytopes of lower dimension; familiar examples are the 3-dimensional prisms, which are products of a
polygon In geometry, a polygon () is a plane figure that is described by a finite number of straight line segments connected to form a closed ''polygonal chain'' (or ''polygonal circuit''). The bounded plane region, the bounding circuit, or the two to ...
and a line segment. The prismatic uniform 4-polytopes consist of two infinite families: * ''Polyhedral prisms'': products of a line segment and a uniform polyhedron. This family is infinite because it includes prisms built on 3-dimensional prisms and
antiprism In geometry, an antiprism or is a polyhedron composed of two parallel direct copies (not mirror images) of an polygon, connected by an alternating band of triangles. They are represented by the Conway notation . Antiprisms are a subclass o ...
s. * ''Duoprisms'': products of two polygons.


Convex polyhedral prisms

The most obvious family of prismatic 4-polytopes is the ''polyhedral prisms,'' i.e. products of a polyhedron with a line segment. The cells of such a 4-polytopes are two identical uniform polyhedra lying in parallel hyperplanes (the ''base'' cells) and a layer of prisms joining them (the ''lateral'' cells). This family includes prisms for the 75 nonprismatic
uniform polyhedra In geometry, a uniform polyhedron has regular polygons as faces and is vertex-transitive (i.e., there is an isometry mapping any vertex onto any other). It follows that all vertices are congruent. Uniform polyhedra may be regular (if also ...
(of which 18 are convex; one of these, the cube-prism, is listed above as the ''tesseract''). There are ''18 convex polyhedral prisms'' created from 5
Platonic solid In geometry, a Platonic solid is a convex, regular polyhedron in three-dimensional Euclidean space. Being a regular polyhedron means that the faces are congruent (identical in shape and size) regular polygons (all angles congruent and all e ...
s and 13 Archimedean solids as well as for the infinite families of three-dimensional
prism Prism usually refers to: * Prism (optics), a transparent optical component with flat surfaces that refract light * Prism (geometry), a kind of polyhedron Prism may also refer to: Science and mathematics * Prism (geology), a type of sedimentary ...
s and
antiprism In geometry, an antiprism or is a polyhedron composed of two parallel direct copies (not mirror images) of an polygon, connected by an alternating band of triangles. They are represented by the Conway notation . Antiprisms are a subclass o ...
s. The symmetry number of a polyhedral prism is twice that of the base polyhedron.


Tetrahedral prisms: A3 × A1

This prismatic tetrahedral symmetry is ,3,2 order 48. There are two index 2 subgroups, 3,3)+,2and ,3,2sup>+, but the second doesn't generate a uniform 4-polytope.


Octahedral prisms: B3 × A1

This prismatic octahedral family symmetry is ,3,2 order 96. There are 6 subgroups of index 2, order 48 that are expressed in alternated 4-polytopes below. Symmetries are 4,3)+,2 +,4,3,2 ,3,2+ ,3+,2 ,(3,2)+ and ,3,2sup>+.


Icosahedral prisms: H3 × A1

This prismatic icosahedral symmetry is ,3,2 order 240. There are two index 2 subgroups, 5,3)+,2and ,3,2sup>+, but the second doesn't generate a uniform polychoron.


Duoprisms: ×

The second is the infinite family of uniform duoprisms, products of two
regular polygon In Euclidean geometry, a regular polygon is a polygon that is direct equiangular (all angles are equal in measure) and equilateral (all sides have the same length). Regular polygons may be either convex, star or skew. In the limit, a sequence ...
s. A duoprism's Coxeter-Dynkin diagram is . Its
vertex figure In geometry, a vertex figure, broadly speaking, is the figure exposed when a corner of a polyhedron or polytope is sliced off. Definitions Take some corner or vertex of a polyhedron. Mark a point somewhere along each connected edge. Draw line ...
is a disphenoid tetrahedron, . This family overlaps with the first: when one of the two "factor" polygons is a square, the product is equivalent to a hyperprism whose base is a three-dimensional prism. The symmetry number of a duoprism whose factors are a ''p''-gon and a ''q''-gon (a "''p,q''-duoprism") is 4''pq'' if ''p''≠''q''; if the factors are both ''p''-gons, the symmetry number is 8''p''2. The tesseract can also be considered a 4,4-duoprism. The elements of a ''p,q''-duoprism (''p'' ≥ 3, ''q'' ≥ 3) are: * Cells: p ''q''-gonal prisms, q ''p''-gonal prisms * Faces: pq squares, p ''q''-gons, q ''p''-gons * Edges: 2pq * Vertices: pq There is no uniform analogue in four dimensions to the infinite family of three-dimensional
antiprism In geometry, an antiprism or is a polyhedron composed of two parallel direct copies (not mirror images) of an polygon, connected by an alternating band of triangles. They are represented by the Conway notation . Antiprisms are a subclass o ...
s. Infinite set of ''p-q duoprism'' - - p ''q''-gonal prisms, q ''p''-gonal prisms: Alternations are possible. = gives the family of ''duoantiprisms'', but they generally cannot be made uniform. p=q=2 is the only ''convex'' case that can be made uniform, giving the regular 16-cell. p=5, q=5/3 is the only nonconvex case that can be made uniform, giving the so-called
great duoantiprism In geometry, the great duoantiprism is the only uniform star- duoantiprism solution in 4-dimensional geometry. It has Schläfli symbol or Coxeter diagram , constructed from 10 pentagonal antiprisms, 10 pentagrammic crossed-antiprisms, and ...
. gives the p-2q-gonal ''prismantiprismoid'' (an edge-alternation of the 2p-4q duoprism), but this cannot be made uniform in any cases.


Polygonal prismatic prisms: × ×

The infinite set of uniform prismatic prisms overlaps with the 4-p duoprisms: (p≥3) - - ''p'' cubes and 4 ''p''-gonal prisms - (All are the same as 4-p duoprism) The second polytope in the series is a lower symmetry of the regular
tesseract In geometry, a tesseract is the four-dimensional analogue of the cube; the tesseract is to the cube as the cube is to the square. Just as the surface of the cube consists of six square faces, the hypersurface of the tesseract consists of e ...
, ×.


Polygonal antiprismatic prisms: × ×

The infinite sets of ''
uniform antiprismatic prism In 4-dimensional geometry, a uniform antiprismatic prism or antiduoprism is a uniform 4-polytope with two uniform antiprism cells in two parallel 3-space hyperplanes, connected by uniform prisms cells between pairs of faces. The symmetry of a ' ...
s'' are constructed from two parallel uniform
antiprism In geometry, an antiprism or is a polyhedron composed of two parallel direct copies (not mirror images) of an polygon, connected by an alternating band of triangles. They are represented by the Conway notation . Antiprisms are a subclass o ...
s): (p≥2) - - 2 ''p''-gonal antiprisms, connected by 2 ''p''-gonal prisms and ''2p'' triangular prisms. A ''p-gonal antiprismatic prism'' has ''4p'' triangle, ''4p'' square and ''4'' p-gon faces. It has ''10p'' edges, and ''4p'' vertices.


Nonuniform alternations

Coxeter showed only two uniform solutions for rank 4 Coxeter groups with all rings alternated (shown with empty circle nodes). The first is , s which represented an index 24 subgroup ( symmetry ,2,2sup>+, order 8) form of the
demitesseract In geometry, the 16-cell is the regular convex 4-polytope (four-dimensional analogue of a Platonic solid) with Schläfli symbol . It is one of the six regular convex 4-polytopes first described by the Swiss mathematician Ludwig Schläfli in the m ...
, , h (symmetry +,4,3,3= 1,1,1 order 192). The second is , s, which is an index 6 subgroup (symmetry 1,1,1sup>+, order 96) form of the
snub 24-cell In geometry, the snub 24-cell or snub disicositetrachoron is a convex uniform 4-polytope composed of 120 regular tetrahedral and 24 icosahedral cells. Five tetrahedra and three icosahedra meet at each vertex. In total it has 480 triangular faces ...
, , s, (symmetry +,4,3 order 576). Other alternations, such as , as an alternation from the
omnitruncated tesseract In four-dimensional geometry, a runcinated tesseract (or ''runcinated 16-cell'') is a convex uniform 4-polytope, being a runcination (a 3rd order truncation) of the regular tesseract. There are 4 variations of runcinations of the tesseract inclu ...
, can not be made uniform as solving for equal edge lengths are in general overdetermined (there are six equations but only four variables). Such nonuniform alternated figures can be constructed as
vertex-transitive In geometry, a polytope (e.g. a polygon or polyhedron) or a tiling is isogonal or vertex-transitive if all its vertices are equivalent under the symmetries of the figure. This implies that each vertex is surrounded by the same kinds of face in ...
4-polytopes by the removal of one of two half sets of the vertices of the full ringed figure, but will have unequal edge lengths. Just like uniform alternations, they will have half of the symmetry of uniform figure, like ,3,3sup>+, order 192, is the symmetry of the ''alternated omnitruncated tesseract''. Wythoff constructions with alternations produce
vertex-transitive In geometry, a polytope (e.g. a polygon or polyhedron) or a tiling is isogonal or vertex-transitive if all its vertices are equivalent under the symmetries of the figure. This implies that each vertex is surrounded by the same kinds of face in ...
figures that can be made equilateral, but not uniform because the alternated gaps (around the removed vertices) create cells that are not regular or semiregular. A proposed name for such figures is scaliform polytopes. This category allows a subset of Johnson solids as cells, for example triangular cupola. Each
vertex configuration In geometry, a vertex configurationCrystallography ...
within a Johnson solid must exist within the vertex figure. For example, a square pyramid has two vertex configurations: 3.3.4 around the base, and 3.3.3.3 at the apex. The nets and vertex figures of the four convex equilateral cases are given below, along with a list of cells around each vertex.


Geometric derivations for 46 nonprismatic Wythoffian uniform polychora

The 46 Wythoffian 4-polytopes include the six
convex regular 4-polytope In mathematics, a regular 4-polytope is a regular four-dimensional polytope. They are the four-dimensional analogues of the regular polyhedra in three dimensions and the regular polygons in two dimensions. There are six convex and ten star reg ...
s. The other forty can be derived from the regular polychora by geometric operations which preserve most or all of their symmetries, and therefore may be classified by the symmetry groups that they have in common. The geometric operations that derive the 40 uniform 4-polytopes from the regular 4-polytopes are ''truncating'' operations. A 4-polytope may be truncated at the vertices, edges or faces, leading to addition of cells corresponding to those elements, as shown in the columns of the tables below. The '' Coxeter-Dynkin diagram'' shows the four mirrors of the Wythoffian kaleidoscope as nodes, and the edges between the nodes are labeled by an integer showing the angle between the mirrors ( π/''n''
radian The radian, denoted by the symbol rad, is the unit of angle in the International System of Units (SI) and is the standard unit of angular measure used in many areas of mathematics. The unit was formerly an SI supplementary unit (before tha ...
s or 180/''n'' degrees). Circled nodes show which mirrors are active for each form; a mirror is active with respect to a vertex that does not lie on it. See also
convex uniform honeycomb In geometry, a convex uniform honeycomb is a uniform tessellation which fills three-dimensional Euclidean space with non-overlapping convex uniform polyhedral cells. Twenty-eight such honeycombs are known: * the familiar cubic honeycomb and 7 tr ...
s, some of which illustrate these operations as applied to the regular
cubic honeycomb The cubic honeycomb or cubic cellulation is the only proper regular space-filling tessellation (or honeycomb) in Euclidean 3-space made up of cubic cells. It has 4 cubes around every edge, and 8 cubes around each vertex. Its vertex figure is a r ...
. If two polytopes are duals of each other (such as the tesseract and 16-cell, or the 120-cell and 600-cell), then ''bitruncating'', ''runcinating'' or ''omnitruncating'' either produces the same figure as the same operation to the other. Thus where only the participle appears in the table it should be understood to apply to either parent.


Summary of constructions by extended symmetry

The 46 uniform polychora constructed from the A4, B4, F4, H4 symmetry are given in this table by their full extended symmetry and Coxeter diagrams. The D4 symmetry is also included, though it only creates duplicates. Alternations are grouped by their chiral symmetry. All alternations are given, although the
snub 24-cell In geometry, the snub 24-cell or snub disicositetrachoron is a convex uniform 4-polytope composed of 120 regular tetrahedral and 24 icosahedral cells. Five tetrahedra and three icosahedra meet at each vertex. In total it has 480 triangular faces ...
, with its 3 constructions from different families is the only one that is uniform. Counts in parenthesis are either repeats or nonuniform. The Coxeter diagrams are given with subscript indices 1 through 46. The 3-3 and 4-4 duoprismatic family is included, the second for its relation to the B4 family.


Uniform star polychora

Other than the aforementioned infinite duoprism and antiprism prism families, which have infinitely many nonconvex members, many uniform star polychora have been discovered. In 1852, Ludwig Schläfli discovered four ''regular'' star polychora: , , , and . In 1883, Edmund Hess found the other six: , , , , , and . Norman Johnson described three uniform antiprism-like star polychora in his doctoral dissertation of 1966: they are based on the three ditrigonal polyhedra sharing the edges and vertices of the regular dodecahedron. Many more have been found since then by other researchers, including Jonathan Bowers and George Olshevsky, creating a total count of 2125 known uniform star polychora at present (not counting the infinite set of duoprisms based on star polygons). There is currently no proof of the set's completeness.


See also

* Finite regular skew polyhedra of 4-space *
Convex uniform honeycomb In geometry, a convex uniform honeycomb is a uniform tessellation which fills three-dimensional Euclidean space with non-overlapping convex uniform polyhedral cells. Twenty-eight such honeycombs are known: * the familiar cubic honeycomb and 7 tr ...
- related infinite 4-polytopes in Euclidean 3-space. * Convex uniform honeycombs in hyperbolic space - related infinite 4-polytopes in Hyperbolic 3-space. *
Paracompact uniform honeycombs In geometry, uniform honeycombs in hyperbolic space are tessellations of convex uniform polyhedron cells. In 3-dimensional hyperbolic space there are 23 Coxeter group families of paracompact uniform honeycombs, generated as Wythoff constructions, ...


References

* A. Boole Stott: ''Geometrical deduction of semiregular from regular polytopes and space fillings'', Verhandelingen of the Koninklijke academy van Wetenschappen width unit Amsterdam, Eerste Sectie 11,1, Amsterdam, 1910 * B. Grünbaum '' Convex Polytopes'', New York ; London : Springer, c2003. .
Second edition prepared by Volker Kaibel,
Victor Klee Victor LaRue Klee, Jr. (September 18, 1925 – August 17, 2007) was a mathematician specialising in convex sets, functional analysis, analysis of algorithms, optimization, and combinatorics. He spent almost his entire career at the University of ...
, and Günter M. Ziegler.

* H.S.M. Coxeter: ** H.S.M. Coxeter, M.S. Longuet-Higgins und J.C.P. Miller: ''Uniform Polyhedra'', Philosophical Transactions of the Royal Society of London, Londen, 1954 **H.S.M. Coxeter, ''Regular Polytopes'', 3rd Edition, Dover New York, 1973 *
Kaleidoscopes: Selected Writings of H.S.M. Coxeter
', editied by F. Arthur Sherk, Peter McMullen, Anthony C. Thompson, Asia Ivic Weiss, Wiley-Interscience Publication, 1995, ** (Paper 22) H.S.M. Coxeter, ''Regular and Semi Regular Polytopes I'', ath. Zeit. 46 (1940) 380-407, MR 2,10** (Paper 23) H.S.M. Coxeter, ''Regular and Semi-Regular Polytopes II'', ath. Zeit. 188 (1985) 559-591** (Paper 24) H.S.M. Coxeter, ''Regular and Semi-Regular Polytopes III'', ath. Zeit. 200 (1988) 3-45* H.S.M. Coxeter and W. O. J. Moser. ''Generators and Relations for Discrete Groups'' 4th ed, Springer-Verlag. New York. 1980 p. 92, p. 122. * John H. Conway, Heidi Burgiel,
Chaim Goodman-Strauss Chaim Goodman-Strauss (born June 22, 1967 in Austin TX) is an American mathematician who works in convex geometry, especially aperiodic tiling. He is on the faculty of the University of Arkansas and is a co-author with John H. Conway of ''The Sym ...
, ''The Symmetries of Things'' 2008, (Chapter 26) * John H. Conway and M.J.T. Guy: ''Four-Dimensional Archimedean Polytopes'', Proceedings of the Colloquium on Convexity at Copenhagen, page 38 und 39, 1965 * N.W. Johnson: ''The Theory of Uniform Polytopes and Honeycombs'', Ph.D. Dissertation, University of Toronto, 1966 * N.W. Johnson: ''Geometries and Transformations'', (2015) Chapter 11: Finite symmetry groups * Richard Klitzing, ''Snubs, alternated facetings, and Stott-Coxeter-Dynkin diagrams'', Symmetry: Culture and Science, Vol. 21, No.4, 329-344, (2010


Googlebook, 370-381


External links

* Convex uniform 4-polytopes
Uniform, convex polytopes in four dimensions
Marco Möller . Includes alternative names for these figures, including those from Jonathan Bowers, George Olshevsky, and Norman Johnson.

** ttps://web.archive.org/web/20110718202453/http://public.beuth-hochschule.de/~meiko/pentatope.html Java3D Applets with sources* Nonconvex uniform 4-polytopes
Uniform polychora
by Jonathan Bowers *
Stella4D
Stella (software) produces interactive views of known uniform polychora including the 64 convex forms and the infinite prismatic families. *
4D-Polytopes and Their Dual Polytopes of the Coxeter Group W(A4) Represented by Quaternions
International Journal of Geometric Methods in Modern Physics,Vol. 9, No. 4 (2012) Mehmet Koca, Nazife Ozdes Koca, Mudhahir Al-Ajmi (2012

{{Polytopes 4-polytopes