Tourist Sternwheelers Of Oregon

Since the early 1980s, several non-steam-powered sternwheel riverboats have been built and operated on major waterways in the U.S. state of Oregon, primarily the Willamette and Columbia Rivers, as river cruise ships used for tourism. Although configured as sternwheelers, they are not paddle steamers, but rather are motor vessels that are only replicas of paddle steamers. They are powered instead by diesel engines. The ''Lurdine'' (now ''Rose'') was, when launched in 1983, "the first passenger-carrying sternwheeler in decades to perateon the Columbia River"."Sternwheeler plies Columbia River again". (July 9, 1983). ''The Oregonian'' (Portland, Oregon), p. F1. In the case of the 1983-built M.V. ''Columbia Gorge'', the construction and operation of a tourist sternwheeler was led by local government officials who viewed the idea as potentially being a major tourist attraction, giving an economic boost to their area, Cascade Locks, Oregon.Goranson, Eric (November 12, 1983). "Stern-wheeler's return brings boost to Cascade Locks". ''The Oregonian'', p. B1.

Background

The only operational sternwheel steamboat surviving in Oregon is the ''Portland'', moored at Portland, Oregon, and listed on the National Register of Historic Places. However, the ''Portland'' is a tugboat and has never carried passengers on a regular basis. In the late 19th century and first part of the 20th century, a large number of passenger steamboats – both sternwheelers and sidewheelers – were operated on the rivers of Oregon and Washington, with many examples on the Willamette and also many on the Columbia River. However, with no such vessels surviving and operational in the late 20th century, interest in building and operating replicas began to develop, now geared towards attracting tourists with excursion travel, or river cruises.

Proposals to construct and operate a new sternwheeler on the Columbia became a serious proposition at least as early as 1974, when the commissioners of the Port of Cascade Locks began pursuing a plan to construct and operate a , 350-passenger sternwheeler on the river.Senior, Jeanie (August 2, 1980). "150-foot said marginal scheme". ''The Oregonian'' (Portland), p. A23. However, not until 1983 did any plans for new sternwheel tour boats come to fruition, when two such boats – the ''Lurdine'' (now ''Rose'') and ''Columbia Gorge'' – were launched. In the same year, the Port of Portland considered renovating the 1947-built sternwheel steam tug ''Portland'' for use as a tour boat.Goranson, Eric (October 11, 1983). "Port advised sternwheeler can be tour boat". ''The Oregonian'', p. D9. That proposal was eventually dropped, because of the high cost of work required to satisfy applicable U.S. Coast Guard regulations.Bella, Rick (May 27, 1992). "Sternwheeler tugs on Portland's hearts". ''The Oregonian'', p. C1. The historic tug was renovated and returned to operating condition, but not converted into a passenger ship.Pickett, Nelson (October 10, 1991). "Famed stern-wheeler Portland undergoes transition to museum". ''The Oregonian'' (Portland edition), p. D2.

Individual vessels

The boats and ships described below are listed in order of their completion, or launching. All operate, or have operated, in Oregon, but most have also operated in Washington (on the Columbia River, which divides those two states for much of its length) or in Alaska.

''Rose''

The sternwheeler now named ''Rose'' is a boat that was built over a nearly four-year period from 1979 to 1983. Constructed in Astoria, Oregon, by John Hendrickson, she was launched on April 24, 1983, and was originally named ''Lurdine''. Her name was intended to honor two late 1800s sternwheelers, the '' Lurline'' and the ''Undine''.Goranson, Eric (April 24, 1983). "Launching fulfills a dream". ''The Sunday Oregonian'', p. D1. ''Lurdine'' was used for tour boat service based in Astoria, and when she entered service, on July 3, 1983, ''The Oregonian'' reported that she was "the first passenger-carrying sternwheeler in decades to perateon the Columbia River". She was designed to emulate historic sternwheelers and has a 10-foot-diameter paddle wheel,Goranson, Eric (December 8, 1982). "Sternwheeler readied for river: 65-foot vessel to haul Columbia tourists". ''The Oregonian'' (Portland), p. G1. which is diesel-powered.

In 1985, ''Lurdine'' was purchased by a group of investors in Portland who formed a new company named the Oregon Steam Navigation Company – a revival of the name used by the original Oregon Steam Navigation Company – which in June 1985 began operating river cruises on the Willamette River, from Portland,McCarthy, Linda (December 5, 1985). "Paddle boat shuttle service revived". ''The Oregonian'', "MetroSouth Extra" section, pp. MS1 and MS4. and on the Columbia River, also from Portland. ''Lurdine'' was moved to Portland, renamed ''Rose'', and began operating Portland-based Columbia River cruises in June or July 1985."River Rose" (July 16, 1985). ''The Oregonian'', p. D7 (photo and caption only). In the fall of the same year, she operated on the Willamette River, including excursions through the Willamette Falls Locks at Oregon City, and was moored at Portland's RiverPlace marina."Mooring facilities limited for tour boat operators". (November 13, 1985). ''The Oregonian'', p. D11. In subsequent years, ''Rose'' has usually been operated only on the Willamette. She has a capacity of 49 passengers.

''Rose'' was sold to Willamette Sternwheel Navigation in early 2004 and continued to be based in Portland and operated on the Willamette.Kadera, Jim (May 13, 2005). "Oregon City adds sternwheeler river attraction". ''The Oregonian'', p. E2. Her mooring location was moved from Portland to Oregon City in 2010.

''Columbia Gorge''

The M.V. ''Columbia Gorge'' is a sternwheeler in service on both the Columbia and Willamette Rivers. She was built in Hood River by Nichols Boat Works and was launched on August 30, 1983.Goranson, Eric (August 31, 1983). "Columbia Gorge paddle-wheeler launched". ''The Oregonian'', p. D8. The motors driving her paddle wheel are diesel-powered. She was partially modeled on the 1890-built ''Bailey Gatzert'' and is named for the Columbia River Gorge. She was built for the Port of Cascade Locks, at a cost of around $2.5 million, of which $1.1 million was funded by federal grants secured by U.S. Senators Mark Hatfield and Bob Packwood, with a goal of boosting tourism in the area. After some delay in obtaining certification from the U.S. Coast Guard, ''Columbia Gorge'' took her maiden passenger voyage on October 29, 1983.Senior, Jeanie (October 30, 1983). "Stern-wheeler takes to river". ''The Sunday Oregonian'', pp. A1 and B1. The Port's plans were for the boat to operate on the Columbia River, out of Cascade Locks, during summer months and on the Willamette River, out of Portland during winter months. Her design includes simulated hog chains, described in 1983 by ''The Oregonian'' as "upright posts on the top deck hich wereused on vintage boats to keep the hulls from vibrating and the wooden boats from warping", but which on this vessel are for appearance only. She is certified to carry up to 599 passengers.Senior, Jeanie (November 1, 1983). "Tour boat given OK". ''The Oregonian'', p. B2. In the late 1980s, at least, M.V. ''Columbia Gorge'' followed the same seasonal pattern of operating out of Cascade Locks from mid-June through September and spending the remainder of each year in Portland, cruising on the Willamette, where she was joined by the ''Rose''.Rollins, Michael (August 21, 1987). "Stern-wheeler ''Portland'' sinks in oblivion". ''The Oregonian'', p. B1.

''Willamette Queen''

The ''Willamette Queen'' is an sternwheeler built in 1990 in Newport, Oregon, which operates on the Willamette River, year-round from Salem's Riverfront Park. Although based in Salem, she makes a trip to Portland once every five years for a required periodic hull inspection. She is a scaled-down replica of former Mississippi River and Yukon riverboats, with twin paddle wheels and a capacity of 90 passengers. The ''Willamette Queen'' carries 10,000–15,000 passengers a year. In March 2015, the boat was lifted out of the water to undergo repair work, expected to last until at least May.

''Queen of the West''

The '' Queen of the West'' was built in 1995 and operates cruises on the Columbia River, out of Portland, and the Snake River, out of Clarkston, Washington. She was built for the American West Steamboat Company, but was later sold to the Majestic America Line and, in turn, to American Cruise Lines in 2009. She was renovated in 2011.

''American Empress''

The ''American Empress'', formerly the ''Empress of the North'', is a diesel-powered sternwheeler built in 2002 by Nichols Brothers Boat Builders, of Freeland, Washington, the same company that was founded in Hood River, Oregon, in 1939 and was previously known as Nichols Boat Works. Although the ''Empress of the North'' was based in Juneau, Alaska (until 2013), and operated between Juneau and Seattle, she also operated cruises in Oregon that included the Columbia and Snake Rivers. In 2013, the ''Empress of the North'' was acquired by the American Queen Steamboat Company, which announced plans to rename her the ''American Empress'' and make Portland her home port starting in 2014, with cruises planned again for the Columbia and Snake Rivers. The ship was rechristened ''American Empress'' in April 2014 and placed back into service cruising the Columbia and Snake, between Astoria, Oregon, and Clarkston, Washington. Her new home port is Vancouver, Washington – which is directly across from Portland – rather than in Portland proper.

See also

* Historic ferries in Oregon
* Steamboats of the Columbia River
* Steamboats of the Willamette River
* Sternwheeler Jean
* ''''
* ''''

References

External links

*{{Commons category-inline, Diesel-powered sternwheelers of Oregon

Paddle steamers of Oregon

River cruise ships
Tourist attractions in Oregon