Physical process
Conceptually, the process of tillage erosion (ETi) can be described as a function of tillage erosivity (ET) and landscapeSpatial patterns
Typical spatial patterns of tillage erosion observed in cultivated field are either local topography related: ''soil loss from hilltops (convexities) and soil accumulation in depressions (concavities)''; or field boundary related: ''soil loss from the downside of a field boundary and soil accumulation in the upper-side of a field boundary''. Local topography related tillage erosion is most pronounced in hummocky landscapes with eroded hilltops that often exhibit a light soil color due to the loss of organic-rich topsoil, a phenomenon often mistakenly assumed to be the result of water erosion. Field boundary related tillage erosion is determined by not only topography but also tillage directions and it is responsible for the forming of tillage banks and terraces.Dabney, S.M. ; et al. (1999). “Landscape benching from tillage erosion between grass hedges”. Soil and Tillage Research 51:219–231.Measurement
Tillage erosion can be measured via the measurement of tillage translocation or the measurement of soil loss and accumulation. Tillage translocation is normally measured with a tracer that is incorporated into the soil in plots. The distributions of the tracer before and after tillage are used to calculate tillage translocation. Two types of tracers, point tracers, and bulk tracers are being used. Whereas point tracers are easy to implement, bulk tracers can provide more information regarding the dispersion of the soil during the translocation process. Soil loss and accumulation by tillage erosion can be estimated from changes in surface elevation. For example, elevation of a tilled field can be compared to an adjacent reference object that has not been eroded such as a fence line or hedgerow. Decreases in surface elevation indicate soil losses while increases in elevation are evidence of soil accumulations. Elevation change can also be determined by taking repeated measurements of the soil surface elevations with high accuracy topographic survey techniques such as RTKModeling
Hillslope model (one-dimensional)
* The Tillage Erosion Risk Indicator (''TillERI'') is a simplified tillage erosion model used to estimate the risk of tillage erosion in agricultural lands at the national scale in Canada. It is one of the erosion indicators as part of the Agri-Environmental indicators developed under thField scale model (two-dimensional)
* The Water and Tillage Erosion Model (''WaTEM'')Van Oost, K.; et al. (2000). “Evaluating the effects of changes in landscape structure on soil erosion by water and tillage”. Landscape Ecology 15 (6):579-591. is a model designed to calculate both water and tillage erosion rate at each grid node in Digital Elevation Model (DEM). The tillage erosion component of WaTEM simulates the soil redistribution in DEM using a diffusion-type equation and assumes that all soil translocation occurs in the direction of steepest slope, irrespective of the pattern of tillage. * The Soil Redistribution by Tillage (''SORET'') model is of the spatial distribution type and can perform 3D simulations of soil redistribution in DEMs on the field scale. It can predict soil redistribution arising from different patterns of tillage in a given landscape via computer simulation of a single tillage operation, and is also able to forecast the long-term effects of repeated operations. It takes into account the tillage pattern (directions) and can calculate tillage translocation in the directions parallel and perpendicular to the direction of tillage. * The Tillage Erosion Model (''TillEM'') calculates point-tillage-erosion rates on grid nodes of a DEM along the lines both parallel and perpendicular to the direction of tillage, representing forward and lateral tillage translocation, which is very similar to the SORET model. The difference is that the TillEM takes into account the effects of slope curvature variations (γ value) on tillage translocation. * The Directional Tillage Erosion Model (''DirTillEM'') is an upgraded version of TillEM. The DirTillEM calculates the incoming and outgoing soil in each of the four directions for each cell in a DEM and determines the tillage erosion for that cell by summing up all incoming and outgoing soil. This calculation structure allows the DirTillEM to treat each cell independently so that it can simulate tillage erosion under complicated tillage patterns (e.g., circular pattern) or irregular field boundaries. * The Cellular Automata model for Tillage Translocation (''CATT'') simulates soil redistribution in a field caused by tillage via a Cellular Automata Model which sequentially calculates the local interactions between a cell and its neighbours due to tillage translocation.Effects
Soil degradation
Tillage erosion causes loss of fertile top soil from the eroding portion of the field. As the top soil layer is getting thinner, subsequent tillage operations will bring up sublayer soil and mix it into the tillage layer. This vertical mixing results inLoss of crop productivity
Subsoil often has undesirable soil properties for crop growth (e.g., less organic carbon, poor structure). When subsoil is mixed into the tillage layer due to tillage erosion, crop productivity will be negatively impacted. The loss due to such crop productivity loss is enormous given that the damage is long lasting and it takes great effort to restore the soil quality to its original level.Environmental impact and greenhouse gas emissions
As soil is degraded due to tillage erosion, it can lead to some environmental issues such as increased nutrient losses and GHG emissions. ForLandform evolution and creation of topographic features
Tillage erosion is a dominant process for landform evolution in many agricultural fields. It flattens convexities and concavities and creates tillage walls and banks along field boundaries With a consistent pattern, it can even create topographic features in flat fields. For example, when a one way throw tillage equipment (e.g., mouldboard plough) is used in a circular pattern over many years, it can create a “>--<” pattern ditch in the middle of the field.Linkages and interactions with other erosion processes
Cultivated fields are subject to not only tillage erosion but also water and wind erosion. There are linkages and interactions between these erosion processes. Linkages and interactions refer to the additive and non-additive effects, respectively, between different erosion processes. Total soil erosion may be increased or decreased due to positive and negative linkages, respectively, between different erosion processes. Interactions occur when one erosion process changes the erodibility of the landscape for another erosion process, or when one process works as a delivery mechanism for another erosion process. For example, soil degradation caused by tillage erosion likely will increase the erodibility of the soil to water and wind erosion. Another example is the interactions between tillage and water erosion around water eroded channels, especially ephemeral gullies. Tillage is often used to eliminate these channels and ephemeral gullies, in which tillage translocation essentially serves as a delivery mechanism to transport soil to areas most susceptible to water erosion.Mitigation
Tillage erosion can be mitigated by reducing the intensity of tillage. This includes reducing the frequency of tillage, the speed and depth of tillage, and the size of the tillage implement. However, conservation tillage equipment designed to reduce water erosion may not be able to reduce tillage erosion and field operations traditionally not considered tillage operations may cause significant amount of tillage erosion (e.g., harvesting for potato). Contour tillage will reduce the variation of tillage speed and depth, resulting in reduced changes in tillage translocation across the field. This will also lead to lower tillage erosion. In addition, downslope movement of soil can be compensated by using a reversible moldboard plough to throw the furrow upslope.Lobb, D.A. (2011). Understanding and managing the causes of soil variability. Journal of Soil and Water Conservation 66(6):175-179. Physically moving soil from accumulation areas (e.g., depressions) to the eroding portion of the field (e.g., hilltops), a practice termed soil landscape restoration, can mitigate the impact of tillage erosion by restoring soil productivity at the eroding portion of the field.References
{{Improve categories, date=April 2021 Agriculture Erosion Geomorphology Soil mechanics Soil erosion Soil science