Trihydrate
   HOME

TheInfoList



OR:

In
chemistry Chemistry is the science, scientific study of the properties and behavior of matter. It is a natural science that covers the Chemical element, elements that make up matter to the chemical compound, compounds made of atoms, molecules and ions ...
, a hydrate is a substance that contains
water Water (chemical formula ) is an inorganic, transparent, tasteless, odorless, and nearly colorless chemical substance, which is the main constituent of Earth's hydrosphere and the fluids of all known living organisms (in which it acts as a ...
or its constituent elements. The chemical state of the water varies widely between different classes of hydrates, some of which were so labeled before their chemical structure was understood.


Chemical nature


Inorganic chemistry

Hydrates are inorganic salts "containing water molecules combined in a definite ratio as an integral part of the
crystal A crystal or crystalline solid is a solid material whose constituents (such as atoms, molecules, or ions) are arranged in a highly ordered microscopic structure, forming a crystal lattice that extends in all directions. In addition, macros ...
" that are either bound to a metal center or that have crystallized with the metal complex. Such hydrates are also said to contain ''
water of crystallization In chemistry, water(s) of crystallization or water(s) of hydration are water molecules that are present inside crystals. Water is often incorporated in the formation of crystals from aqueous solutions. In some contexts, water of crystallization is ...
'' or ''water of hydration''. If the water is heavy water in which the constituent hydrogen is the
isotope Isotopes are two or more types of atoms that have the same atomic number (number of protons in their nuclei) and position in the periodic table (and hence belong to the same chemical element), and that differ in nucleon numbers (mass numbers) ...
deuterium Deuterium (or hydrogen-2, symbol or deuterium, also known as heavy hydrogen) is one of two Stable isotope ratio, stable isotopes of hydrogen (the other being Hydrogen atom, protium, or hydrogen-1). The atomic nucleus, nucleus of a deuterium ato ...
, then the term ''deuterate'' may be used in place of ''hydrate''. A colorful example is
cobalt(II) chloride Cobalt(II) chloride is an inorganic compound of cobalt and chlorine, with the formula . The compound forms several hydrates ·''n'', for ''n'' = 1, 2, 6, and 9. Claims of the formation of tri- and tetrahydrates have not been confirmed.M. T. Sau ...
, which turns from blue to red upon
hydration Hydration may refer to: * Hydrate, a substance that contains water * Hydration enthalpy, energy released through hydrating a substance * Hydration reaction, a chemical addition reaction where a hydroxyl group and proton are added to a compound * ...
, and can therefore be used as a water indicator. The notation "''hydrated compound''⋅''n''", where ''n'' is the number of water molecules per
formula unit In chemistry, a formula unit is the empirical formula of any ionic or covalent network solid compound used as an independent entity for stoichiometric calculations. It is the lowest whole number ratio of ions represented in an ionic compound. Exa ...
of the salt, is commonly used to show that a salt is hydrated. The ''n'' is usually a low
integer An integer is the number zero (), a positive natural number (, , , etc.) or a negative integer with a minus sign (−1, −2, −3, etc.). The negative numbers are the additive inverses of the corresponding positive numbers. In the language ...
, though it is possible for fractional values to occur. For example, in a monohydrate ''n'' = 1, and in a hexahydrate ''n'' = 6. Numerical prefixes mostly of Greek origin are: A hydrate that has lost water is referred to as an
anhydride An organic acid anhydride is an acid anhydride that is an organic compound. An acid anhydride is a compound that has two acyl groups bonded to the same oxygen atom. A common type of organic acid anhydride is a carboxylic anhydride, where the pa ...
; the remaining water, if any exists, can only be removed with very strong heating. A substance that does not contain any water is referred to as
anhydrous A substance is anhydrous if it contains no water. Many processes in chemistry can be impeded by the presence of water; therefore, it is important that water-free reagents and techniques are used. In practice, however, it is very difficult to achie ...
. Some anhydrous compounds are hydrated so easily that they are said to be
hygroscopic Hygroscopy is the phenomenon of attracting and holding water molecules via either absorption or adsorption from the surrounding environment, which is usually at normal or room temperature. If water molecules become suspended among the substance ...
and are used as drying agents or
desiccant A desiccant is a hygroscopic substance that is used to induce or sustain a state of dryness (desiccation) in its vicinity; it is the opposite of a humectant. Commonly encountered pre-packaged desiccants are solids that absorb water. Desiccant ...
s.


Organic chemistry

In organic chemistry, a hydrate is a compound formed by the hydration, i.e. "Addition of water or of the elements of water (i.e. H and OH) to a molecular entity". For example:
ethanol Ethanol (abbr. EtOH; also called ethyl alcohol, grain alcohol, drinking alcohol, or simply alcohol) is an organic compound. It is an Alcohol (chemistry), alcohol with the chemical formula . Its formula can be also written as or (an ethyl ...
, , is the product of the
hydration reaction In chemistry, a hydration reaction is a chemical reaction A chemical reaction is a process that leads to the IUPAC nomenclature for organic transformations, chemical transformation of one set of chemical substances to another. Classically, che ...
of
ethene Ethylene (IUPAC name: ethene) is a hydrocarbon which has the formula or . It is a colourless, flammable gas with a faint "sweet and musky" odour when pure. It is the simplest alkene (a hydrocarbon with carbon-carbon double bonds). Ethylene is ...
, , formed by the addition of H to one C and OH to the other C, and so can be considered as the hydrate of ethene. A molecule of water may be eliminated, for example, by the action of
sulfuric acid Sulfuric acid (American spelling and the preferred IUPAC name) or sulphuric acid ( Commonwealth spelling), known in antiquity as oil of vitriol, is a mineral acid composed of the elements sulfur, oxygen and hydrogen, with the molecular formu ...
. Another example is
chloral hydrate Chloral hydrate is a geminal diol with the formula . It is a colorless solid. It has limited use as a sedative and hypnotic pharmaceutical drug. It is also a useful laboratory chemical reagent and precursor. It is derived from chloral (trichl ...
, , which can be formed by reaction of water with
chloral Chloral, also known as trichloroacetaldehyde or trichloroethanal, is the organic compound with the formula Cl3CCHO. This aldehyde is a colourless oily liquid that is soluble in a wide range of solvents. It reacts with water to form chloral hydrate ...
, . Many organic molecules, as well as inorganic molecules, form crystals that incorporate water into the crystalline structure without chemical alteration of the organic molecule (
water of crystallization In chemistry, water(s) of crystallization or water(s) of hydration are water molecules that are present inside crystals. Water is often incorporated in the formation of crystals from aqueous solutions. In some contexts, water of crystallization is ...
). The sugar
trehalose Trehalose (from Turkish '' tıgala'' – a sugar derived from insect cocoons + -ose) is a sugar consisting of two molecules of glucose. It is also known as mycose or tremalose. Some bacteria, fungi, plants and invertebrate animals synthesize it ...
, for example, exists in both an
anhydrous A substance is anhydrous if it contains no water. Many processes in chemistry can be impeded by the presence of water; therefore, it is important that water-free reagents and techniques are used. In practice, however, it is very difficult to achie ...
form (melting point 203 °C) and as a dihydrate (melting point 97 °C). Protein crystals commonly have as much as 50% water content. Molecules are also labeled as hydrates for historical reasons not covered above.
Glucose Glucose is a simple sugar with the molecular formula . Glucose is overall the most abundant monosaccharide, a subcategory of carbohydrates. Glucose is mainly made by plants and most algae during photosynthesis from water and carbon dioxide, using ...
, , was originally thought of as and described as a
carbohydrate In organic chemistry, a carbohydrate () is a biomolecule consisting of carbon (C), hydrogen (H) and oxygen (O) atoms, usually with a hydrogen–oxygen atom ratio of 2:1 (as in water) and thus with the empirical formula (where ''m'' may or ma ...
. Hydrate formation is common for
active ingredient An active ingredient is any ingredient that provides biologically active or other direct effect in the diagnosis, cure, mitigation, treatment, or prevention of disease or to affect the structure or any function of the body of humans or animals. T ...
s. Many manufacturing processes provide an opportunity for hydrates to form and the state of hydration can be changed with environmental humidity and time. The state of hydration of an active pharmaceutical ingredient can significantly affect the solubility and dissolution rate and therefore its
bioavailability In pharmacology, bioavailability is a subcategory of absorption and is the fraction (%) of an administered drug that reaches the systemic circulation. By definition, when a medication is administered intravenously, its bioavailability is 100%. H ...
.


Clathrate hydrates

Clathrate hydrates Clathrate hydrates, or gas hydrates, clathrates, hydrates, etc., are crystalline water-based solids physically resembling ice, in which small non-polar molecules (typically gases) or polar molecules with large hydrophobic moieties are trapped ins ...
(also known as gas hydrates, gas clathrates, etc.) are water ice with gas molecules trapped within; they are a form of
clathrate A clathrate is a chemical substance consisting of a lattice that traps or contains molecules. The word ''clathrate'' is derived from the Latin (), meaning ‘with bars, latticed’. Most clathrate compounds are polymeric and completely envelop t ...
. An important example is
methane hydrate Methane clathrate (CH4·5.75H2O) or (8CH4·46H2O), also called methane hydrate, hydromethane, methane ice, fire ice, natural gas hydrate, or gas hydrate, is a solid clathrate compound (more specifically, a clathrate hydrate) in which a large amo ...
(also known as gas hydrate, methane clathrate, etc.). Nonpolar molecules such as methane can form
clathrate hydrate Clathrate hydrates, or gas hydrates, clathrates, hydrates, etc., are crystalline water-based solids physically resembling ice, in which small non-polar molecules (typically gases) or polar molecules with large hydrophobic moieties are trapped ins ...
s with water, especially under high pressure. Although there is no
hydrogen bond In chemistry, a hydrogen bond (or H-bond) is a primarily electrostatic force of attraction between a hydrogen (H) atom which is covalently bound to a more electronegative "donor" atom or group (Dn), and another electronegative atom bearing a ...
ing between water and guest molecules when methane is the guest molecule of the clathrate, guest–host hydrogen bonding often forms when the guest is a larger organic molecule such as
tetrahydrofuran Tetrahydrofuran (THF), or oxolane, is an organic compound with the formula (CH2)4O. The compound is classified as heterocyclic compound, specifically a cyclic ether. It is a colorless, water-miscible organic liquid with low viscosity. It is ma ...
. In such cases the guest–host hydrogen bonds result in the formation of L-type
Bjerrum defect A Bjerrum defect is a crystallographic defect which is specific to ice, and which is partly responsible for the electrical properties of ice. It was first proposed by Niels Bjerrum in 1952 in order to explain the electrical polarization of ice in ...
s in the clathrate lattice.


Stability

The stability of hydrates is generally determined by the nature of the compounds, their temperature, and the relative humidity (if they are exposed to air).


See also

*
Efflorescence In chemistry, efflorescence (which means "to flower out" in French) is the migration of a salt to the surface of a porous material, where it forms a coating. The essential process involves the dissolving of an internally held salt in water, or ...
*
Hygroscopy Hygroscopy is the phenomenon of attracting and holding water molecules via either absorption or adsorption from the surrounding environment, which is usually at normal or room temperature. If water molecules become suspended among the substance' ...
*
Mineral hydration In chemistry, mineral hydration is an inorganic chemical reaction which adds water to the crystal structure of a mineral, usually creating a new mineral, usually called a ''hydrate''. In geological terms, the process of mineral hydration is know ...
*
Water of crystallization In chemistry, water(s) of crystallization or water(s) of hydration are water molecules that are present inside crystals. Water is often incorporated in the formation of crystals from aqueous solutions. In some contexts, water of crystallization is ...
*
Hemihydrate In chemistry, a hemihydrate (or semihydrate) is a hydrate whose solid contains one molecule of water of crystallization per two other molecules, or per two unit cell In geometry, biology, mineralogy and solid state physics, a unit cell is a ...
*
Hydrous oxide Hydrous oxides are inorganic compounds of a metal, hydroxide, and weakly bound water. Some examples include: *Hydrous ferric oxide (HFO) *Hydrous cupric oxide *Hydrous thorium oxide (THO) and hydrous titanium oxide (TiHO) *Hydrous aluminum oxide ( ...


References

{{reflist