Tremec TR-6070 Transmission on:
[Wikipedia]
[Google]
[Amazon]
The TREMEC TR-6070 seven-speed RWD
TREMEC Corporation
(formerly Transmission Technologies Corporation). The TR-6070 is based on the well-respected TREMEC TR-6060 six-speed transmission. A triple overdrive gear was added to improve fuel economy and lower emissions. Incorporated in the TR-6070 is a Gear Absolute Position (GAP) sensor. The technology provides a signal from the transmission to the engine controller, inferring the real-time position of the shift selector. With this information, the engine RPM can be controlled to match the next gear selection - which enhances drivability. Design features of the TR-6070 synchronizers include a combination of double-cone and triple-cone rings, utilizing a hybrid solution on all forward gears. The hybrid rings are a combination of carbon and sintered bronze cones providing higher capacity and shift performance. Linear bearings lower the friction of the shift rail movements, making the shifter feel naturally lighter and more direct. The TR-6070 features at a glance: * Rear-wheel drive, seven-speed manual overdrive transmission * Triple overdrive for improved fuel economy and lower emissions *
Gear ratio spread of up to 6.33
* Triple- and double-cone synchronizers
* Advanced and asymmetric clutch teeth in second and third-speed gears
* Two-piece gear design for high torque capacity
* Low mass, hollow shaft design available
* Sensors include: Temperature , Speed , Gear position
manual transmission
A manual transmission (MT), also known as manual gearbox, standard transmission (in Canada, the United Kingdom, and the United States), or stick shift (in the United States), is a multi-speed motor vehicle transmission (mechanics), transmission ...
features seven forward speeds and one reverse speed. It is manufactured bTREMEC Corporation
(formerly Transmission Technologies Corporation). The TR-6070 is based on the well-respected TREMEC TR-6060 six-speed transmission. A triple overdrive gear was added to improve fuel economy and lower emissions. Incorporated in the TR-6070 is a Gear Absolute Position (GAP) sensor. The technology provides a signal from the transmission to the engine controller, inferring the real-time position of the shift selector. With this information, the engine RPM can be controlled to match the next gear selection - which enhances drivability. Design features of the TR-6070 synchronizers include a combination of double-cone and triple-cone rings, utilizing a hybrid solution on all forward gears. The hybrid rings are a combination of carbon and sintered bronze cones providing higher capacity and shift performance. Linear bearings lower the friction of the shift rail movements, making the shifter feel naturally lighter and more direct. The TR-6070 features at a glance: * Rear-wheel drive, seven-speed manual overdrive transmission * Triple overdrive for improved fuel economy and lower emissions *
Gear ratio spread of up to 6.33
* Triple- and double-cone synchronizers
* Advanced and asymmetric clutch teeth in second and third-speed gears
* Two-piece gear design for high torque capacity
* Low mass, hollow shaft design available
* Sensors include: Temperature , Speed , Gear position
Applications
* 2014–2019Chevrolet Corvette
The Chevrolet Corvette is a two-door, two-passenger luxury sports car manufactured and marketed by Chevrolet since 1953. With eight design generations, noted sequentially from C1 to C8, the Corvette is noted for its performance and distinctive ...
Selected Gear Ratios
See also
*Tremec
TREMEC (Transmisiones y Equipos Mecánicos SA de CV, formerly Transmission Technology Corporation, TTC) is a manufacturer of automobile transmissions and drivetrain components based in Querétaro, Mexico.
Company
Torque transfer solutions fro ...
References
{{reflist 6070 General Motors transmissions