Thermodynamic potential

A thermodynamic potential (or more accurately, a thermodynamic potential energy)ISO/IEC 80000-5, Quantities an units, Part 5 - Thermodynamics, item 5-20.4 Helmholtz energy, Helmholtz functionISO/IEC 80000-5, Quantities an units, Part 5 - Thermodynamics, item 5-20.5, Gibbs energy, Gibbs function is a scalar quantity used to represent the thermodynamic state of a system. The concept of thermodynamic potentials was introduced by Pierre Duhem in 1886. Josiah Willard Gibbs in his papers used the term ''fundamental functions''.

One main thermodynamic potential that has a physical interpretation is the internal energy . It is the energy of configuration of a given system of conservative forces (that is why it is called potential) and only has meaning with respect to a defined set of references (or data). Expressions for all other thermodynamic energy potentials are derivable via Legendre transforms from an expression for .

In thermodynamics, external forces, such as gravity, are counted as contributing to total energy rather than to thermodynamic potentials. For example, the working fluid in a steam engine has higher total energy due to gravity while sitting on top of Mount Everest than it has at the bottom of the Mariana Trench, but the same thermodynamic potentials. This is because the gravitational potential energy belongs to the total energy rather than to thermodynamic potentials such as internal energy.

Description and interpretation

Five common thermodynamic potentials are:Alberty (2001) p. 1353

where = temperature, = entropy, = pressure, = volume. The Helmholtz free energy is in ISO/IEC standard called Helmholtz energy or Helmholtz function. It is often denoted by the symbol , but the use of is preferred by IUPAC, ISO and IEC. is the number of particles of type in the system and is the chemical potential for an -type particle. The set of all are also included as natural variables but may be ignored when no chemical reactions are occurring which cause them to change.

These five common potentials are all potential energies, but there are also entropy potentials. The thermodynamic square can be used as a tool to recall and derive some of the potentials.

Just as in mechanics, where potential energy is defined as capacity to do work, similarly different potentials have different meanings:
* Internal energy () is the capacity to do work plus the capacity to release heat.
* Gibbs energy () is the capacity to do non-mechanical work.
* Enthalpy () is the capacity to do non-mechanical work plus the capacity to release heat.
* Helmholtz energy () is the capacity to do mechanical plus non-mechanical work.
From these meanings (which actually apply in specific conditions, e.g. constant pressure, temperature, etc), we can say that is the energy added to the system, is the total work done on it, is the non-mechanical work done on it, and is the sum of non-mechanical work done on the system and the heat given to it.
Thermodynamic potentials are very useful when calculating the equilibrium results of a chemical reaction, or when measuring the properties of materials in a chemical reaction. The chemical reactions usually take place under some constraints such as constant pressure and temperature, or constant entropy and volume, and when this is true, there is a corresponding thermodynamic potential that comes into play. Just as in mechanics, the system will tend towards lower values of potential and at equilibrium, under these constraints, the potential will take on an unchanging minimum value. The thermodynamic potentials can also be used to estimate the total amount of energy available from a thermodynamic system under the appropriate constraint.

In particular: (see principle of minimum energy for a derivation)

* When the entropy and "external parameters" (e.g. volume) of a closed system are held constant, the internal energy decreases and reaches a minimum value at equilibrium. This follows from the first and second laws of thermodynamics and is called the principle of minimum energy. The following three statements are directly derivable from this principle.
* When the temperature and external parameters of a closed system are held constant, the Helmholtz free energy decreases and reaches a minimum value at equilibrium.
* When the pressure and external parameters of a closed system are held constant, the enthalpy decreases and reaches a minimum value at equilibrium.
* When the temperature , pressure and external parameters of a closed system are held constant, the Gibbs free energy decreases and reaches a minimum value at equilibrium.

Natural variables

The variables that are held constant in this process are termed the natural variables of that potential.Alberty (2001) p. 1352 The natural variables are important not only for the above-mentioned reason, but also because if a thermodynamic potential can be determined as a function of its natural variables, all of the thermodynamic properties of the system can be found by taking partial derivatives of that potential with respect to its natural variables and this is true for no other combination of variables. On the converse, if a thermodynamic potential is not given as a function of its natural variables, it will not, in general, yield all of the thermodynamic properties of the system.

The set of natural variables for the above four potentials are formed from every combination of the - and - variables, excluding any pairs of conjugate variables. There is no reason to ignore the − conjugate pairs, and in fact we may define four additional potentials for each species. Using IUPAC notation in which the brackets contain the natural variables (other than the main four), we have:

If there is only one species, then we are done. But, if there are, say, two species, then there will be additional potentials such as U mu_1,\mu_2= U-\mu_1 N_1-\mu_2 N_2 and so on. If there are dimensions to the thermodynamic space, then there are unique thermodynamic potentials. For the most simple case, a single phase ideal gas, there will be three dimensions, yielding eight thermodynamic potentials.

The fundamental equations

The definitions of the thermodynamic potentials may be differentiated and, along with the first and second laws of thermodynamics, a set of differential equations known as the ''fundamental equations'' follow.Alberty (2001) p. 1354 (Actually they are all expressions of the same fundamental thermodynamic relation, but are expressed in different variables.) By the first law of thermodynamics, any differential change in the internal energy of a system can be written as the sum of heat flowing into the system subtracted by the work done by the system on the environment, along with any change due to the addition of new particles to the system:

:$\mathrmU = \delta Q - \delta W+\sum_i \mu_i\,\mathrmN_i$

where is the infinitesimal heat flow into the system, and is the infinitesimal work done by the system, is the chemical potential of particle type and is the number of type particles. (Neither nor are exact differentials. Small changes in these variables are, therefore, represented with rather than .)

By the second law of thermodynamics, we can express the internal energy change in terms of state functions and their differentials. In case of reversible changes we have:

:$\delta Q = T\,\mathrmS$

:$\delta W = p\,\mathrmV$

where
: is temperature,
: is entropy,
: is pressure,
and is volume, and the equality holds for reversible processes.

This leads to the standard differential form of the internal energy in case of a quasistatic reversible change:

:$\mathrmU = T\mathrmS - p\mathrmV+\sum_i \mu_i\,\mathrmN_i$

Since , and are thermodynamic functions of state, the above relation holds also for arbitrary non-reversible changes. If the system has more external variables than just the volume that can change, the fundamental thermodynamic relation generalizes to:

:$dU = T\,\mathrmS - p\,\mathrmV + \sum_j \mu_j\,\mathrmN_j + \sum_i X_i \, \mathrmx_$

Here the are the generalized forces corresponding to the external variables .

Applying Legendre transforms repeatedly, the following differential relations hold for the four potentials:

The infinitesimals on the right-hand side of each of the above equations are of the natural variables of the potential on the left-hand side.
Similar equations can be developed for all of the other thermodynamic potentials of the system. There will be one fundamental equation for each thermodynamic potential, resulting in a total of fundamental equations.

The differences between the four thermodynamic potentials can be summarized as follows:

:$\mathrm(pV) = \mathrmH - \mathrmU = \mathrmG - \mathrmF$
:$\mathrm(TS) = \mathrmU - \mathrmF = \mathrmH - \mathrmG$

The equations of state

We can use the above equations to derive some differential definitions of some thermodynamic parameters. If we define to stand for any of the thermodynamic potentials, then the above equations are of the form:

:$\mathrm\Phi=\sum_i x_i\,\mathrmy_i$

where and are conjugate pairs, and the are the natural variables of the potential . From the chain rule it follows that:

:$x_j=\left(\frac\right)_$

Where is the set of all natural variables of except . This yields expressions for various thermodynamic parameters in terms of the derivatives of the potentials with respect to their natural variables. These equations are known as ''equations of state'' since they specify parameters of the thermodynamic state. If we restrict ourselves to the potentials , , and , then we have:

:$+T=\left(\frac\right)_ =\left(\frac\right)_$

:$-p=\left(\frac\right)_ =\left(\frac\right)_$

:$+V=\left(\frac\right)_ =\left(\frac\right)_$

:$-S=\left(\frac\right)_ =\left(\frac\right)_$

:$~\mu_j= \left(\frac\right)_$

where, in the last equation, is any of the thermodynamic potentials , , , and $$ are the set of natural variables for that potential, excluding . If we use all potentials, then we will have more equations of state such as

:$-N_j=\left(\frac\right)_$

and so on. In all, there will be  equations for each potential, resulting in a total of equations of state. If the  equations of state for a particular potential are known, then the fundamental equation for that potential can be determined. This means that all thermodynamic information about the system will be known, and that the fundamental equations for any other potential can be found, along with the corresponding equations of state.

Measurement of thermodynamic potentials

The above equations of state suggest methods to experimentally measure changes in the thermodynamic potentials using physically measureable parameters. For example the free energy expressions

:$+V=\left(\frac\right)_$

and

:$-p=\left(\frac\right)_$

can be integrated at constant temperature and quantities to obtain:

:$\Delta G = \int_^V\,\mathrmp\,\,\,\,$(at constant ''T'', )

:$\Delta F = -\int_^p\,\mathrmV\,\,\,\,$(at constant ''T'', )

which can be measured by monitoring the measureable variables of pressure, temperature and volume. Changes in the enthalpy and internal energy can be measured by calorimetry (which measures the amount of heat ''ΔQ'' released or absorbed by a system). The expressions

:$+T=\left(\frac\right)_ =\left(\frac\right)_$

can be integrated:

:$\Delta H = \int_^T\,\mathrmS = \Delta Q\,\,\,\,$(at constant ''P'', )

:$\Delta U = \int_^T\,\mathrmS = \Delta Q\,\,\,\,$(at constant ''V'', )

Note that these measurements are made at constant and are therefore not applicable to situations in which chemical reactions take place.

The Maxwell relations

Again, define and to be conjugate pairs, and the to be the natural variables of some potential . We may take the "cross differentials" of the state equations, which obey the following relationship:

:$\left(\frac \left(\frac \right)_ \right)_ = \left(\frac \left(\frac \right)_ \right)_$

From these we get the Maxwell relations. There will be of them for each potential giving a total of equations in all. If we restrict ourselves the , , ,

:$\left(\frac\right)_ = -\left(\frac\right)_$

:$\left(\frac\right)_ = +\left(\frac\right)_$

:$\left(\frac\right)_ = +\left(\frac\right)_$

:$\left(\frac\right)_ = -\left(\frac\right)_$

Using the equations of state involving the chemical potential we get equations such as:

:$\left(\frac\right)_ = \left(\frac\right)_$

and using the other potentials we can get equations such as:

:$\left(\frac\right)_ = -\left(\frac\right)_$

:$\left(\frac\right)_ = -\left(\frac\right)_$

Euler relations

Again, define and to be conjugate pairs, and the to be the natural variables of the internal energy.
Since all of the natural variables of the internal energy are extensive quantities

:$U(\)=\alpha U(\)$

it follows from Euler's homogeneous function theorem that the internal energy can be written as:

:$U(\)=\sum_j y_j\left(\frac\right)_$

From the equations of state, we then have:

:$U=TS-pV+\sum_i \mu_i N_i$

This formula is known as an ''Euler relation'', because Euler's theorem on homogeneous functions leads to it. (It was not discovered by Euler in an investigation of thermodynamics, which did not exist in his day.).

Substituting into the expressions for the other main potentials we have:

:$F= -pV+\sum_i \mu_i N_i$

:$H=TS +\sum_i \mu_i N_i$

:$G= \sum_i \mu_i N_i$

As in the above sections, this process can be carried out on all of the other thermodynamic potentials. Thus, there is another Euler relation, based on the expression of entropy as a function of internal energy and other extensive variables. Yet other Euler relations hold for other fundamental equations for energy or entropy, as respective functions of other state variables including some intensive state variables.

The Gibbs–Duhem relation

Deriving the Gibbs–Duhem equation from basic thermodynamic state equations is straightforward. Equating any thermodynamic potential definition with its Euler relation expression yields:

:$U=TS-PV+\sum_i \mu_i N_i$

Differentiating, and using the second law:

:$\mathrmU=T\mathrmS-P\mathrmV+\sum_i\mu_i\,\mathrmN_i$

yields:

:$0=S\mathrmT-V\mathrmP+\sum_i N_i \mathrm\mu_i$

Which is the Gibbs–Duhem relation. The Gibbs–Duhem is a relationship among the intensive parameters of the system. It follows that for a simple system with components, there will be independent parameters, or degrees of freedom. For example, a simple system with a single component will have two degrees of freedom, and may be specified by only two parameters, such as pressure and volume for example. The law is named after Josiah Willard Gibbs and Pierre Duhem.

Stability Conditions

As the internal energy is a convex function of entropy and volume, the stability condition requires that the second derivative of internal energy with entropy or volume to be positive. It is commonly expressed as $d^2U>0$. Since the maximum principle of entropy is equivalent to minimum principle of internal energy, the combined criteria for stability or thermodynamic equilibrium is expressed as $d^2U>0$ and $dU=0$ for parameters, entropy and volume. This is analogous to $d^2S<0$ and $dS=0$ condition for entropy at equilibrium. The same concept can be applied to the various thermodynamic potentials by identifying if they are convex or concave of respective their variables.

$\biggl(\biggr)_\leq0$ and $\biggl(\biggr)_\geq0$

Where Helmholtz energy is a concave function of temperature and convex function of volume.

$\biggl(\biggr)_\leq0$ and $\biggl(\biggr)_\geq0$

Where enthalpy is a concave function of pressure and convex function of entropy.

$\biggl(\biggr)_\leq0$ and $\biggl(\biggr)_\leq0$

Where enthalpy is a concave function of both pressure and temperature.

In general the thermodynamic potentials (the internal energy and its Legendre transforms), are convex functions of their extrinsic variables and concave functions of intrinsic variables. The stability conditions impose that isothermal compressibility is positive and that for non-negative temperature, $C_P>C_V$.

Chemical reactions

Changes in these quantities are useful for assessing the degree to which a chemical reaction will proceed. The relevant quantity depends on the reaction conditions, as shown in the following table. denotes the change in the potential and at equilibrium the change will be zero.

Most commonly one considers reactions at constant and , so the Gibbs free energy is the most useful potential in studies of chemical reactions.

See also

* Coomber's relationship

Notes

References

*
*
*

Further reading

* ''McGraw Hill Encyclopaedia of Physics'' (2nd Edition), C.B. Parker, 1994,
* ''Thermodynamics, From Concepts to Applications'' (2nd Edition), A. Shavit, C. Gutfinger, CRC Press (Taylor and Francis Group, USA), 2009,
* ''Chemical Thermodynamics'', D.J.G. Ives, University Chemistry, Macdonald Technical and Scientific, 1971,
* ''Elements of Statistical Thermodynamics'' (2nd Edition), L.K. Nash, Principles of Chemistry, Addison-Wesley, 1974,
* ''Statistical Physics'' (2nd Edition), F. Mandl, Manchester Physics, John Wiley & Sons, 2008,

External links

Thermodynamic Potentials
– Georgia State University

Chemical Potential Energy: The 'Characteristic' vs the Concentration-Dependent Kind

{{Authority control

Thermodynamics
Potentials
Thermodynamic equations