Teeter-totter

A seesaw (also known as a teeter-totter or teeterboard) is a long, narrow board supported by a single pivot point, most commonly located at the midpoint between both ends; as one end goes up, the other goes down. These are most commonly found at parks and school playgrounds.

Mechanics

Mechanically, a seesaw is a lever which consists of a beam and fulcrum with the effort and load on either sides.

Varieties

The most common playground design of seesaw features a board balanced in the center. A person sits on each end, and they take turns pushing their feet against the ground to lift their side into the air. Playground seesaws usually have handles for the riders to grip as they sit facing each other. One problem with the seesaw's design is that if a child allows himself/herself to hit the ground suddenly after jumping, or exits the seesaw at the bottom, the other child may fall and be injured. For this reason, seesaws are often mounted above a soft surface such as foam, wood chips, or sand.

Seesaws also are manufactured in shapes designed to look like other things, such as airplanes, helicopters, and animals.

Seesaws, and the eagerness of children to play with them, are sometimes used to aid in mechanical processes. For example, at the Gaviotas community in Colombia, a children's seesaw is connected to a water pump.

In 2019, a set of seesaws were installed spanning the US-Mexico border fence between El Paso and Ciudad Juárez.

Name origin and variations

Seesaws go by several different names around the world. ''Seesaw'', or its variant ''see-saw'', is a direct Anglicisation of the French ''ci-ça'', meaning literally, ''this-that'', seemingly attributable to the back-and-forth motion for which a seesaw is known.

The term may also be attributable to the repetitive motion of a saw. It may have its origins in a combination of "scie" – the French word for "saw" with the Anglo-Saxon term "saw". Thus "scie-saw" became "see-saw". Another possibility, is the more obvious situation of the apparent appearance, disappearance, and re-emergence of the person, seated opposite one's position, as they, seemingly, "rise" and "fall", against a changing, oscillating background - therefore: "I see you", followed by, "I saw you".

In the northern inland and westernmost region of the United States, a seesaw is also called a "teeter-totter." According to linguist Peter Trudgill, the term originates from the Nordic language word ''tittermatorter''.''teeter-totter''
listing in TheFreeDictionary.com A "teeter-totter" may also refer to a two-person swing on a swing seat, on which two children sit facing each other and the teeter-totter swings back and forth in a pendulum motion.

Both ''teeter-totter'' (from ''teeter'', as in ''to teeter on the edge'') and ''seesaw'' (from the verb ''saw'') demonstrate the linguistic process called reduplication, where a word or syllable is doubled, often with a different vowel. Reduplication is typical of words that indicate repeated activity, such as riding up and down on a seesaw.

In the southeastern New England region of the United States, it is sometimes referred to as a ''tilt'' or a ''tilting board''.

According to Michael Drout, "There are almost no 'Teeter-' forms in Pennsylvania, and if you go to western West Virginia and down into western North Carolina there is a band of 'Ridey-Horse' that heads almost straight south. This pattern suggests a New England term that spread down the coast and a separate, Scots-Irish development in Appalachia. 'Hickey-horse' in the coastal regions of North Carolina is consistent with other linguistic and ethnic variations."

Popularity

In the early 2000s, seesaws have been removed from many playgrounds in the United States, citing safety concerns. However, some people have questioned whether or not the seesaws should have been removed, indicating the fun provided by seesaws may outweigh the safety risk posed using them.

See also

* Neolttwigi
* Teeterboard

References

{{Authority control

Playground equipment
Simple machines