tatara (furnace)

The is the traditional Japanese furnace used for smelting iron and steel. The word later also came to mean the entire building housing the furnace. The traditional steel in Japan comes from ironsand processed in a special way, called tatara system.https://www.jsme.or.jp/tsd/ICBTT/conference02/TatsuoINOUE.html "Science of Tatara and Japanese Sword
- Traditional Technology viewed from Modern Science" by Tatsuo INOUE

Iron ore was used in the first steel manufacturing in Japan. Tatara steelmaking process using ironsand was conducted in the Kibi Province, which later became the base of the Bizen school of swordsmithing, around the middle of the sixth century, and steelmaking using ironsand is thought to have spread from Kibi to various places in Japan. In western Japan, a low box-shaped furnace different from the Chinese and Korean style was used to refine iron, and in eastern Japan, both a low box-shaped furnace and a vertical furnace unique to Japan were used.History of Iron and Steel Making Technology in Japan ーMainly on the smelting of iron sand by Tataraー.
Mitsuru Tate (2005). Tetsu-to-Hagane Vol. 91. The Iron and Steel Institute of Japan.たたらの歴史 たたら製鉄の進歩 (Progress of Tatara Iron Making).
Yasugi Cityたたら」の発祥と発展 (Changes in Japanese Tatara Iron Making Technology).
Yasugi Cityたたら製鉄の歴史と仕組み.
Nagoya Japanese Sword Museum Nagoya Touken World

In the Middle Ages, furnaces were enlarged to produce more steel of higher quality, and underground facilities were also huge and complicated to keep the furnace warm and reduce humidity. In addition, a new method of collecting ironsand, called ''kanna nagashi'' (鉄穴流), which can efficiently collect more ironsand using waterways, was adopted.

In the Edo period, tatara steelmaking was further improved and became the same as today's tatara steelmaking in Japan. Tatara steelmaking came to be carried out in a stereotyped building called ''takadono'' (高殿), and a space called ''Hondoko'' (本床), where charcoal is laid, and a space called ''Kobune'' (小舟), which has a tunnel-like gap, were installed under the steelmaking furnace, completing the underground structure known as ''Hondoko zuri'' (本床釣り). In the late 1600s, tatara steelmaking adopted a revolutionary invention. It is a foot-operated blower called a ''tembin fuigo'' (天秤鞴), which can blow a large amount of air into the furnace to increase the temperature. As a result, high quality steel can be produced in large quantities.

By 1920 All Tatara Furnaces where no longer economically viable and they closed once the Western blast furnace was introduced to Japan , in 1977, the Society for Preservation of Japanese Art Swords and historical firearms (''Nihon Bijutsu Token Hozon Kyokai'') with the approval of the Japanese government's department of the environment built a tatara furnace to make Japanese swords.

The steel, or , (a general Term for steel, not used prior to the Meiji Era meaning "Cannonball Hard Steel (Tama= Cannonball Hagane = Hard ) is smelted at Shimane facility for Japanese swords (, commonly known as ) by contemporary Japanese forge masters like Kihara Akira and Gassan Sadatoshi is still smelted in a ''tatara''. One of the few remaining ''tatara'' is the Nittoho ''tatara'' in Shimane Prefecture, Japan.

Etymology

The term 'tatara' first appeared in '' Kojiki'' compiled in 712 as ''Hototarara Isusukihime no Mikoto'' (富登多々良伊須々岐比売命) and in '' Nihonshoki'' compiled in 720 as ''Himetatara Isuzuhime no Mikoto'' (姫蹈鞴五十鈴姫命), and these words represent Shinto ''kami''. Historically, several ''kanji'' characters have been used to express the term 'tatara,' and in ancient times, '蹈鞴', which represents a fan, was used, and as time went by, '鑪', which represents the whole steel works, and '高殿', which represents the buildings of steel works, were also used. Today, the term 'tatara' is applied to steelmaking technology using ironsand, which flourished from ancient times to the Edo period.

Process

The smelting process used differs from that of the modern mass production of steel. A clay vessel about 1.1 meters (4 feet) tall, 3 meters (12 feet) long, and 1.1 meters (4 feet) wide is constructed. This is the ''tatara''. After the clay tub has dried, it is fired until dry. A charcoal fire is started from soft pine charcoal, then the smelter will wait for the fire to reach the correct temperature. At that point, he will direct the addition of ironsand, known as ''satetsu''. This will be layered in with more charcoal and more ironsand over the next 72 hours. Four or five people need to constantly work on this process.

It takes about a week to build the ''tatara'' and complete the iron conversion to steel. When the process is done, the clay tub is broken and the steel bloom, known as a ''kera'', is removed. At the end of the process, the ''tatara'' will have consumed about 10 tons of ''satetsu'' and 12 tons of charcoal, leaving about 2.5 tons of ''tamahagane''.

The Nittoho ''Tatara''

In 1977, the Japanese Society for Preservation of Japanese Art Swords (Nittoho), together with the Japanese government's Agency for Cultural Affairs and Hitachi Works subsidiary Yasugi Special Steel , built in Shimane Prefecture the so-named Nittoho ''Tatara'' to provide the steel necessary for the production of Japanese swords and historical firearms. The Nittoho ''Tatara'' is managed by Yasugi Works, and is operational only during the winter months.

See also

*Japanese swordsmithing
* Bloomery furnace

References

Sources

* Iwanami Japanese dictionary, 5th Edition (2000), CD version

The Tale of the Tatara
Hitachi Metals, Ltd.

The Nittoho Tatara in Shimane Prefecture
YouTube.

thejapanesesword.com Tatara
* Masaru Fujimot

The Japan Times, March 16, 2003.

{{DEFAULTSORT:Tatara (Furnace)
Industrial furnaces
Steelmaking