The Suzuki G engine is a series of three- and four-cylinder

internal combustion engine An internal combustion engine (ICE or IC engine) is a heat engine in which the combustion of a fuel occurs with an oxidizer (usually air) in a combustion chamber that is an integral part of the working fluid flow circuit. In an internal combus ...

s manufactured by

Suzuki Motor Corporation is a Japanese multinational corporation headquartered in Minami-ku, Hamamatsu, Japan. Suzuki manufactures automobiles, motorcycles, all-terrain vehicles (ATVs), outboard marine engines, wheelchairs and a variety of other small internal com ...

for various

automobiles A car or automobile is a motor vehicle with wheels. Most definitions of ''cars'' say that they run primarily on roads, seat one to eight people, have four wheels, and mainly transport people instead of goods. The year 1886 is regarded as ...

, primarily based on the

GM M platform The GM M platform was the designation used by General Motors for the platform that underpinned the first, second and third generation Suzuki Cultus and its offspring. The first generation of this platform had been designed by Suzuki for the ...

, as well as many small trucks such as the Suzuki Samurai and

Suzuki Vitara The Suzuki Vitara is a series of SUVs produced by Suzuki in five generations since 1988. The second, third-generation and 2022 models are known as the Suzuki Grand Vitara, with the fourth generation eschewing the "Grand" prefix. In Japan and a ...

and their derivatives.

Straight-threes

G10/G10 Turbo

The G10 (sometimes referred to as the "G10A" to set it apart from the later G10B) is a straight-three gasoline

four-stroke engine A four-stroke (also four-cycle) engine is an internal combustion (IC) engine in which the piston completes four separate strokes while turning the crankshaft. A stroke refers to the full travel of the piston along the cylinder, in either directio ...

using aluminum alloy for the block,

cylinder head In an internal combustion engine, the cylinder head (often abbreviated to simply "head") sits above the cylinders and forms the roof of the combustion chamber. In sidevalve engines, the head is a simple sheet of metal; whereas in more modern ov ...

and pistons. It is equipped with either a

carburetor A carburetor (also spelled carburettor) is a device used by an internal combustion engine to control and mix air and fuel entering the engine. The primary method of adding fuel to the intake air is through the venturi tube in the main meteri ...

electronic fuel injection Manifold injection is a mixture formation system for internal combustion engines with external mixture formation. It is commonly used in engines with spark ignition that use petrol as fuel, such as the Otto engine, and the Wankel engine. In a mani ...

and was also offered as the G10T with an

IHI Ihi, Ehee (Nepal Bhasa:ईही) is a ceremony in the Newar community in Nepal in which pre-adolescent girls are "married" to the Suvarna Kumar which is a symbol of the god Vishnu, ensuring that the girl becomes and remains fertile. It is bel ...

RHB31/32

turbocharger In an internal combustion engine, a turbocharger (often called a turbo) is a forced induction device that is powered by the flow of exhaust gases. It uses this energy to compress the intake gas, forcing more air into the engine in order to pro ...

and either

MPFI Manifold injection is a mixture formation system for internal combustion engines with external mixture formation. It is commonly used in engines with spark ignition that use petrol as fuel, such as the Otto engine, and the Wankel engine. In a mani ...

or a carburetor. It has a single overhead camshaft driving six valves. Cylinder spacing is , as for the four-cylinder G13/G15/G16 engines. A bore and stroke give the engine a total of of displacement. It produces at 5100 rpm and at 3200 rpm with 9.5:1 compression in the carbureted model, at 5700 rpm and at 3300 rpm in the fuel-injected model. The original home market version originally offered a carbureted JIS at 5500 rpm, later power output fluctuated around . From 1984 to 1988 the standard G10 engine used a hemispherical head carbureted design with mechanical lifters. From 1989 to 2001 the engine received updates in the form of

throttle-body fuel injection Manifold injection is a mixture formation system for internal combustion engines with external mixture formation. It is commonly used in engines with spark ignition that use petrol as fuel, such as the Otto engine, and the Wankel engine. In a mani ...

and

hydraulic lifters A hydraulic tappet, also known as a hydraulic valve lifter or hydraulic lash adjuster, is a device for maintaining zero valve clearance in an internal combustion engine. Conventional solid valve lifters require regular adjusting to maintain a sma ...

. A detuned unit, with a slightly different camshaft, two-ring pistons and differently tuned

engine control unit An engine control unit (ECU), also commonly called an engine control module (ECM), is a type of electronic control unit that controls a series of actuators on an internal combustion engine to ensure optimal engine performance. It does this by re ...

, was used in the ultra-fuel-efficient

Geo Metro The Geo Metro is a marketing and manufacturing variation of the Suzuki Cultus available in North America from 1989 through 2001 as a joint effort of General Motors (GM) and Suzuki. In the US, the Metro carried a Geo nameplate from 1989 through ...

XFi model, which delivered as much as . In the US, the G10 in the 2000

Chevrolet Metro The Geo Metro is a marketing and manufacturing variation of the Suzuki Cultus available in North America from 1989 through 2001 as a joint effort of General Motors (GM) and Suzuki. In the US, the Metro carried a Geo nameplate from 1989 through 1 ...

became the last engine available on an American-sold vehicle to use throttle body injection for fuel delivery. Through the 1985-1991 model years a turbocharged MPFI version of the G10 was offered in some markets. This engine delivered at 5500 rpm and at 3500 rpm. This turbocharged engine, with mechanical lifters, was available in both the US and Canadian Firefly/Sprint/Forsa from 1987-88. Only the Canadian Firefly/Sprint had this option, with hydraulic lifters, in the 1989-1991 model years. In the Japanese domestic market, the car was originally carbureted ( JIS at 5500 rpm, at 3500 rpm) and went on sale in June 1984. In October 1987, along with a facelift, the home market Turbo received fuel injection and power output went up to JIS, torque to . It was a short-lived version, however, as by September 1988 the car was no longer on sale in the Japanese domestic market. As the only market in the world, Canada did continue to receive this engine for its versions of the second generation Cultus. Because of the physics of the straight-three engine, the G10 tends not to idle as smoothly as other engines such as a

straight-six engine The straight-six engine (also referred to as an inline-six engine; abbreviated I6 or L6) is a piston engine with six cylinders arranged in a straight line along the crankshaft. A straight-six engine has perfect primary and secondary engine bala ...

. This engine has a non-interference valvetrain design. Applications: * 1985–2001

Suzuki Cultus The Suzuki Cultus is a supermini car produced by the Japanese manufacturer Suzuki from 1983 to 2016. The nameplate is currently used as a rebadged second-generation Suzuki Celerio in Pakistan since 2017. It was first presented at the 25th To ...

and global nameplate siblings: Chevrolet Sprint, Geo/Chevrolet Metro, Pontiac Firefly, Suzuki Swift, Suzuki Forsa * November 1984–

AA41S AB41S * 1988–

AA43S AA43V AB43S AA44S AB44S Ultralight aircraft * ICP Savannah

Straight-fours

G10B

The G10B was an all-aluminium engine, a

four-cylinder The engine configuration describes the fundamental operating principles by which internal combustion engines are categorized. Piston engines are often categorized by their cylinder layout, valves and camshafts. Wankel engines are often categorize ...

SOHC An overhead camshaft (OHC) engine is a piston engine where the camshaft is located in the cylinder head above the combustion chamber. This contrasts with earlier overhead valve engines (OHV), where the camshaft is located below the combustion cha ...

16-valve engine which produces at 6000 rpm and of torque at 4500 rpm. It was sold in both carburetted and

form. It was widely used in motorsport in India due to its lightweight and tunability. The mounting points of the engine block were similar to that of the G13 and so an engine swap was a relatively easy task. It was phased out when production of Zen ceased in 2006. It was made only in India but was sold in all countries the Zen was sold. But the Zen which was sold as Suzuki Alto 1.0 in Europe came with a detuned G10B 8-valve engine which produces at 5500 rpm and of torque at 4500 rpm.The engine head & above spares are exactly idential to the Zen Carburettor sold in India from 1993 to 1999. * 1993–2006

Maruti Zen The Maruti Suzuki Zen is a 5-door hatchback produced and sold in India by Suzuki's Indian subsidiary Maruti Suzuki from 1993 until 2006; it is a widened version of the Suzuki Cervo Mode. The word "ZEN" is an acronym standing for Zero Engine Noise. ...

(sold as Suzuki Alto in Europe, Australia). * 2007–2017

hatchback (Pakistan)

G12

The G12B is an inline-four engine using aluminum alloy for the block, cylinder head and pistons. It is derived from the G13BB engine by reducing the bore to to displace . Stroke remains the same at . It has a SOHC 16V head and the fuel delivery is by multi-point fuel injection. It is BS6 (equal to early

Euro 6 The European emission standards are vehicle emission standards for pollution from the use of new land surface vehicles sold in the European Union and EEA member states and the UK, and ships in EU waters. The standards are defined in a seri ...

) emissions compliant. It has lighter pistons and other detail improvements to be a more fuel efficient engine than the G13BB on which it is based. Maruti modified the engine to displace less than 1200 cc to take advantage of the reduced excise duty on such vehicles in India. It produces at 6000 rpm and at 3000 rpm for petrol variant and at 6000 rpm and at 3000 rpm for CNG variant. * 2010–present–

Maruti Eeco The Maruti Suzuki Eeco is a microvan introduced in India by the Indian automaker Maruti Suzuki in early 2010. This car is a stripped down version of the discontinued Versa which itself was the Indian version of the 10th generation Suzuki Every ( ...

* 2016–present– Maruti Suzuki Super Carry (CNG only)

G13 series

The G13 is an inline-four engine using aluminum alloy for the block, cylinder head and pistons. Displacing for the G13A and for all other G13 engines, fuel delivery is either through a carburetor, throttle body fuel injection or multi-point fuel injection. This engine was made with different valvetrain designs: 8 or 16 valve

or 16 valve DOHC. All G13 engines have a bore and a stroke size of except for the G13A engine which has a stroke. There was also a " G13C variant built in Indonesia, combining the longer stroke with a bore.

G13A

The 1324 cc

8-valve G13A has a non-interference valvetrain design. Horsepower ranges from 60-70 PS with 90-100 N.m of torque. * Bore x Stroke: 74mm x 77mm * Compression Ratio: 8.9:1 * Cylinder Block Deck Height: 186.8mm * Cylinder Head Volume: 32.2cc * Head Gasket Thickness (compressed): 1.2mm * Intake Valve O.D. 36mm * Exhaust Valve O.D. 30mm * It was used in the following vehicles: ** November 1984–1988

/Swift ** 1984–1988

Suzuki Jimny The is a series of four-wheel drive off-road mini SUVs, manufactured and marketed by Japanese automaker Suzuki since 1970. Originally belonging to the kei class, Japan's light automobile tax/legal class, the company continues to market a kei- ...

1300 (JA51) ** 1985–1988 Holden Barina MB/ML (Australia/New Zealand) ** 1986–1990 Suzuki Samurai ** 1992–1998 Suzuki Margalla (Pakistan)

G13B

This 1298 cc DOHC 16-valve engine with bore and stroke of 74mm x 75.5mm (2.91 in x 2.97 in). It uses the older distributor driven off the intake camshaft, and produces approximately at 6500 rpm / at 5000 rpm. Redline is set at 7400–7600 rpm. The compression ratio is between 10.0–11.5:1. This engine has an

interference Interference is the act of interfering, invading, or poaching. Interference may also refer to: Communications * Interference (communication), anything which alters, modifies, or disrupts a message * Adjacent-channel interference, caused by extra ...

valvetrain design, making periodic timing belt changes vital to the engine's life. It was used in the following vehicles: *1985 Suzuki RS/1 (prototype) * 1986–1994 Suzuki Cultus/Swift GTi AA33S/AA34S

G13BA

The

8-valve G13BA with carburettor or single-point fuel injection and produces and of torque. It has 9.5:1 compression ratio and also a non-interference valvetrain design. 1995 to 1997 U.S. and Canadian-market engines gained hydraulic lash adjusters. It was used in the following vehicles: * 1989

Suzuki Sidekick The Suzuki Vitara is a series of SUVs produced by Suzuki in five generations since 1988. The second, third-generation and 2022 models are known as the Suzuki Grand Vitara, with the fourth generation eschewing the "Grand" prefix. In Japan and a ...

(JA trim) * 1989–1993 Holden Barina - (carburetor: at 6,000 rpm; at 4,000 rpm) * 1989–1997 Suzuki Swift * 1991–1995 Suzuki Samurai * 1991–2004 Chevrolet Swift * 1992–1997

* 1993–1998

(JB31/32) * 1994–2000 Maruti Esteem * 1996–2004

Subaru Justy The Subaru Justy is a subcompact hatchback that has been sold by Japanese automobile manufacturer Subaru since 1984. Subaru manufactured the Justy from 1984 to 1994; since then it has sold rebadged versions of other vehicles under the Justy namep ...

* June 1994–March 2000 Maruti Gypsy King

G13BB

The

16-valve G13BB (introduced in March 1995) has electronic multi-point fuel injection (MPFI), generating and . The G13BB uses a wasted spark arrangement of two coils bolted directly to the valve cover. This engine uses a MAP sensor to monitor manifold pressure, similar to the G16B series. This engine has a non-interference valvetrain design. It uses the same G series block found in many other Suzuki models and so it is a popular conversion into the Suzuki Sierra/Samurai, which uses either a G13A (85-88) or G13BA (88.5-98). This allows the engine to fit into the engine bay simply as engine and gearbox mounts are identical and both engines are mounted North-South. It was used in the following vehicles: * 1995–2002

Suzuki Cultus Crescent The is a subcompact car that was produced by Suzuki in Japan between 1995 and 2002, with South Asian production continuing until 2007. The Cultus Crescent was sold as such in Japan until May 1998, when it was renamed Suzuki Cultus due to the ...

* 1997–2003 Suzuki Swift * 1998–2001 Chevrolet Metro/Pontiac Firefly/Suzuki Swift * 1998–2003

* 1998–2007 Maruti Esteem * 1999–2015 Changan Linyang * 2000–2004 Suzuki Every Landy/Carry 1.3 * 2000–2017 Maruti Gypsy King * 2001–2004

G13C

The G13C was bored out by one millimeter, for a bore and stroke of and a displacement of . Maximum power was listed at at 6000 rpm in 1999. This engine was developed by Suzuki's Indonesian subsidiary and also available for Malaysian market Suzuki Futura 1400. It was first used in the 1991 Suzuki Carry Futura. It was used in the following vehicles: * 1991–1999 Suzuki Carry Futura SL413 (ST130)

G13K

"G13K" is the JDM version of G13B. It has different cams, intake and exhaust manifolds and ECU with cutoff at 8600rpm. It makes 115 hp. It was used in the Japanese version of Swift GTi called Cultus GT-i, replacing the first generation Swift GTi.

G15A

This engine is a 1.5 L (1,493 cc)

16-valve In automotive engineering a multi-valve or multivalve engine is one where each cylinder has more than two valves. A multi-valve engine has better breathing and may be able to operate at higher revolutions per minute (RPM) than a two-valve engine, ...

engine configuration, generating between at 5500–6500 rpm and at 3000–4000 rpm. It has a bore in conjunction with an stroke. Applications: * 1991–1995

sedan * 1995–2002

/Baleno * 2000–2018 Suzuki Carry Futura (ST150, Indonesia) * 2004–present

Suzuki APV The Suzuki APV is a minivan/light commercial vehicle designed by Suzuki in Japan and manufactured in Indonesia by Suzuki Indomobil Motor. The abbreviation "APV" is short for ''All Purpose Vehicle''. It is powered by either 1.5-liter or 1.6-liter i ...

(Indonesia/Pakistan) * 2011–2019

Suzuki Mega Carry The Suzuki APV is a minivan/ light commercial vehicle designed by Suzuki in Japan and manufactured in Indonesia by Suzuki Indomobil Motor. The abbreviation "APV" is short for ''All Purpose Vehicle''. It is powered by either 1.5-liter or 1.6-lit ...

(Indonesia)

G16

The G16 is an inline-four engine displacing . It shares the G15A's bore, in a long block with a stroke.

G16A

Either 8-valve

carb or EPI before 1990 or 16-valve

EPI after 1990. The 16-valve G16A mainly used in Japan and some selected markets. Applications: * 1989–1992

(8-valve) * 1988–1990 Suzuki Escudo (8-valve) * 1990–2000 Suzuki Escudo (8-valve) * 1990–2001

sedan * 1996–1998

Suzuki X-90 The Suzuki X-90 is a front engine, rear or four wheel drive, two door, two seater SUV manufactured and marketed by Suzuki for the model years of 1995 to 1997. Related to the Suzuki Vitara, the X-90 featured a T Section removable roof. Replacing t ...

* 1997–2000 Suzuki Carry Futura (ST160, Indonesia) * 2005–present

(except for Indonesia and Pakistan)

G16B

The

G16B was the 16-valve version of G16A for worldwide market. The Suzuki G16B engine features an aluminum cylinder block with wet liners and aluminum cylinder head, cylinder bore and piston stroke are 75.0 mm (2.95 in) and 90.0 mm (3.54 in), respectively. Compression ratio rating is 9.5:1. The G16B engine is equipped with Multi-point fuel injection (MPFI) and uses a wasted spark arrangement of two coils bolted directly to the valve cover. This engine produced at 5,600 rpm of and at 4,000 rpm. Used in the following vehicles: * 1992–2005

* 1992–1997

/Swift/Esteem * 1995–2002

Chevrolet Tracker (Americas) The Chevrolet Tracker, formerly the Geo Tracker, is a mini SUV produced for Chevrolet and Geo by CAMI Automotive in Ingersoll, Ontario. Although appearing as a compact SUV, the Tracker was actually certified as a light truck due to its of ...

* 1995–2007 Suzuki Baleno/Esteem * 1996–1998

Geo Tracker The Chevrolet Tracker, formerly the Geo Tracker, is a mini SUV produced for Chevrolet and Geo by CAMI Automotive in Ingersoll, Ontario. Although appearing as a compact SUV, the Tracker was actually certified as a light truck due to its off-road ...

* 1996–1998

Notes

References

* {{DEFAULTSORT:Suzuki G Engine G Straight-three engines Straight-four engines Gasoline engines by model