USS Langley (CVL-27) and battleship in typhoon 1944

Ship motions are defined by the six

degrees of freedom Degrees of freedom (often abbreviated df or DOF) refers to the number of independent variables or parameters of a thermodynamic system. In various scientific fields, the word "freedom" is used to describe the limits to which physical movement or ...

that a ship, boat or any other

craft A craft or trade is a pastime or an occupation that requires particular skills and knowledge of skilled work. In a historical sense, particularly the Middle Ages and earlier, the term is usually applied to people occupied in small scale prod ...

can experience.

Reference axes

The '' vertical/Z axis'', or ''yaw axis'', is an imaginary line running vertically through the ship and through its

centre of mass In physics, the center of mass of a distribution of mass in space (sometimes referred to as the balance point) is the unique point where the weighted relative position of the distributed mass sums to zero. This is the point to which a force may ...

. A yaw motion is a side-to side movement of the bow and stern of the ship. The '' transverse/Y axis'', ''lateral axis'', or ''pitch axis'' is an imaginary line running horizontally across the ship and through the centre of mass. A pitch motion is an up-or-down movement of the bow and stern of the ship. The '' longitudinal/X axis'', or ''roll axis'', is an imaginary line running horizontally through the length of the ship, through its centre of mass, and parallel to the ''

waterline The waterline is the line where the hull of a ship meets the surface of the water. Specifically, it is also the name of a special marking, also known as an international load line, Plimsoll line and water line (positioned amidships), that indi ...

''. A roll motion is a side-to-side or port-starboard tilting motion of the superstructure around this axis.

Rotational

There are three special axes in any ship, called longitudinal, transverse and vertical axes. The movements around them are known as roll, pitch, and yaw respectively.

Roll

The tilting rotation of a vessel about its longitudinal/X (front-back or bow-stern) axis. An offset or deviation from normal on this axis is referred to as

list A ''list'' is any set of items in a row. List or lists may also refer to: People * List (surname) Organizations * List College, an undergraduate division of the Jewish Theological Seminary of America * SC Germania List, German rugby union ...

heel The heel is the prominence at the posterior end of the foot. It is based on the projection of one bone, the calcaneus or heel bone, behind the articulation of the bones of the lower Human leg, leg. Structure To distribute the compressive for ...

. Heel refers to an offset that is intentional or expected, as caused by wind pressure on sails, turning, or other crew actions. The rolling motion towards a steady state (or list) angle due to the ship's own weight distribution is referred in marine engineering as heel. List normally refers to an unintentional or unexpected offset, as caused by flooding, battle damage, shifting cargo, etc.

Pitch

The up/down rotation of a vessel about its transverse/Y (side-to-side or port-starboard)

axis An axis (plural ''axes'') is an imaginary line around which an object rotates or is symmetrical. Axis may also refer to: Mathematics * Axis of rotation: see rotation around a fixed axis * Axis (mathematics), a designator for a Cartesian-coordinat ...

. An offset or deviation from normal on this axis is referred to as ''trim'' or ''out of trim''. A vessel that is pitching back and forth is usually termed to be hobby horsing.

Yaw

The turning rotation of a vessel about its vertical/Z axis. An offset or deviation from normal on this axis is referred to as deviation or set. This is referred to as the

heading Heading can refer to: * Heading (metalworking), a process which incorporates the extruding and upsetting processes * Headline, text at the top of a newspaper article * Heading (navigation), the direction a person or vehicle is facing, usually s ...

of the boat relative to a magnetic compass (or true heading if referenced to the true north pole); it also affects the bearing.

Translational

Surge

The linear

longitudinal Longitudinal is a geometric term of location which may refer to: * Longitude ** Line of longitude, also called a meridian * Longitudinal engine, an internal combustion engine in which the crankshaft is oriented along the long axis of the vehicl ...

(front/back or bow/

stern The stern is the back or aft-most part of a ship or boat, technically defined as the area built up over the sternpost, extending upwards from the counter rail to the taffrail. The stern lies opposite the bow, the foremost part of a ship. Ori ...

) motion imparted by maritime conditions, usually head or following seas, or by accelerations imparted by the propulsion system.

Sway

The linear transverse (side-to-side or port-starboard) motion. This motion is generated directly either by the water and wind motion, particularly lateral wave motion, exerting forces against the hull or by the ship's own propulsion; or indirectly by the inertia of the ship while turning. This movement can be compared to the vessel's lateral drift from its course.

Heave

The

linear Linearity is the property of a mathematical relationship (''function'') that can be graphically represented as a straight line. Linearity is closely related to '' proportionality''. Examples in physics include rectilinear motion, the linear r ...

vertical (up/down) motion; excessive downward heave can swamp a ship.

Stabilization

There are methods for both passive and active motion stabilization used in some designs. They include static hull features such as

skeg A skeg (or skegg or skag) is a sternward extension of the keel of boats and ships which have a rudder mounted on the centre line. The term also applies to the lowest point on an outboard motor or the outdrive of an inboard/outboard."A small fin f ...

s and

bilge keel A bilge keel is a nautical device used to reduce a ship's tendency to roll. Bilge keels are employed in pairs (one for each side of the ship). A ship may have more than one bilge keel per side, but this is rare. Bilge keels increase hydrodynamic r ...

s, or active mechanical devices like counterweights,

antiroll tanks Antiroll tanks are tanks fitted onto ships in order to improve the tank's response to roll motion. Fitted with baffles intended to slow the rate of water transfer from the port side of the tank to the starboard side and the reverse, the tanks are d ...

and stabilizers.

References

* Society of Naval Architects and Marine Engineers (

SNAME The Society of Naval Architects and Marine Engineers (SNAME) is a global professional society that provides a forum for the advancement of the engineering profession as applied to the marine field. Although it particularly names the naval archit ...

), "Principles of Naval Architecture", 1989, Vol. III, Pg.41, Section 3 - Ship Responses to Regular Waves * Sukas, Omer Faruk; Kinaci, Omer Kemal; Bal, Sakir (2019)
Theoretical background and application of MANSIM for ship maneuvering simulationsMANSIM Lab
Ocean Engineering, 192, 106239. Nautical terminology