![Siilinjärvi mine](https://upload.wikimedia.org/wikipedia/commons/5/5a/Siilinj%C3%A4rvi_mine.jpg)
Surface mining, including strip mining,
open-pit mining
Open-pit mining, also known as open-cast or open-cut mining and in larger contexts mega-mining, is a surface mining technique of extracting rock or minerals from the earth from an open-air pit, sometimes known as a borrow.
This form of mini ...
and
mountaintop removal mining
Mountaintop removal mining (MTR), also known as mountaintop mining (MTM), is a form of surface mining at the summit or summit ridge of a mountain. Coal seams are extracted from a mountain by removing the land, or overburden, above the seams. Thi ...
, is a broad category of
mining
Mining is the extraction of valuable minerals or other geological materials from the Earth, usually from an ore body, lode, vein, seam, reef, or placer deposit. The exploitation of these deposits for raw material is based on the economic ...
in which soil and rock overlying the mineral deposit (the
overburden
In mining, overburden (also called waste or spoil) is the material that lies above an area that lends itself to economical exploitation, such as the rock, soil, and ecosystem that lies above a coal seam or ore body. Overburden is distinct from tai ...
) are removed, in contrast to
underground mining
Mining is the extraction of valuable minerals or other geological materials from the Earth, usually from an ore body, lode, vein, seam, reef, or placer deposit. The exploitation of these deposits for raw material is based on the economic vi ...
, in which the overlying rock is left in place, and the mineral is removed through
shafts
''Shafts'' was an English feminist magazine produced by Margaret Sibthorp from 1892 until 1899. Initially published weekly and priced at one penny, its themes included votes for women, women's education, and radical attitudes towards vivisection, ...
or tunnels.
In North America, where the majority of surface
coal mining occurs, this method began to be used in the mid-16th century
and is practiced throughout the world in the mining of many different minerals. In North America, surface mining gained popularity throughout the 20th century, and surface mines now produce most of the
coal mined in the United States.
In most forms of surface mining,
heavy equipment, such as earthmovers, first remove the overburden. Next, large machines, such as
dragline excavator
A dragline excavator is a piece of heavy equipment used in civil engineering and surface mining.
Draglines fall into two broad categories: those that are based on standard, lifting cranes, and the heavy units which have to be built on-site. Mo ...
s or
bucket-wheel excavator
A bucket-wheel excavator (BWE) is a large heavy equipment machine used in surface mining.
The primary function of BWEs is ...
s, extract the mineral.
The pros of surface mining are that it has a lower financial cost and is a lot safer than underground mining because all mining operations take place above the surface. The cons are the hazards it presents to human health and the environment. Humans face a variety of health risks caused by mining such as different cardiovascular diseases, food, and water contamination.
Habitat destruction
Habitat destruction (also termed habitat loss and habitat reduction) is the process by which a natural habitat becomes incapable of supporting its native species. The organisms that previously inhabited the site are displaced or dead, thereby ...
, alongside air, noise, and water pollution, are all significant negative environmental impacts caused by the side effects of surface mining.
Types
There are five main types of surface mining as detailed below.
Strip mining
![Bagger-garzweiler](https://upload.wikimedia.org/wikipedia/commons/6/6a/Bagger-garzweiler.jpg)
Strip mining is the practice of mining a seam of mineral, by first removing a long strip of overlying soil and rock (the
overburden
In mining, overburden (also called waste or spoil) is the material that lies above an area that lends itself to economical exploitation, such as the rock, soil, and ecosystem that lies above a coal seam or ore body. Overburden is distinct from tai ...
); this activity is also referred to as overburden removal. It is most commonly used to mine
coal
Coal is a combustible black or brownish-black sedimentary rock, formed as rock strata called coal seams. Coal is mostly carbon with variable amounts of other elements, chiefly hydrogen, sulfur, oxygen, and nitrogen.
Coal is formed when ...
and
lignite (brown coal). Strip mining is only practical when the ore body to be excavated is relatively near the surface and/or is mostly horizontal. This type of mining uses some of the largest machines on earth, including
bucket-wheel excavator
A bucket-wheel excavator (BWE) is a large heavy equipment machine used in surface mining.
The primary function of BWEs is ...
s which can move as much as 12,000 cubic metres (16,000 cu. yd.) of earth per hour.
There are two forms of strip mining. The more common method is area stripping, which is used on fairly flat terrain, to extract deposits over a large area. As each long strip is excavated, the overburden is placed in the excavation produced by the previous strip.
Contour mining involves removing the overburden above the mineral seam near an
outcrop
An outcrop or rocky outcrop is a visible exposure of bedrock or ancient superficial deposits on the surface of the Earth.
Features
Outcrops do not cover the majority of the Earth's land surface because in most places the bedrock or superficia ...
in hilly terrain, where the mineral outcrop usually follows the contour of the land. Contour stripping is often followed by
auger mining into the hillside, to remove more of the mineral. This method commonly leaves behind
terraces in mountainsides.
Open-pit mining
Open-pit mining
Open-pit mining, also known as open-cast or open-cut mining and in larger contexts mega-mining, is a surface mining technique of extracting rock or minerals from the earth from an open-air pit, sometimes known as a borrow.
This form of mini ...
refers to a method of extracting
rock
Rock most often refers to:
* Rock (geology), a naturally occurring solid aggregate of minerals or mineraloids
* Rock music, a genre of popular music
Rock or Rocks may also refer to:
Places United Kingdom
* Rock, Caerphilly, a location in Wales ...
or
minerals
In geology and mineralogy, a mineral or mineral species is, broadly speaking, a solid chemical compound with a fairly well-defined chemical composition and a specific crystal structure that occurs naturally in pure form.John P. Rafferty, ed ...
from the earth through their removal from an open pit or
borrow
Borrow or borrowing can mean: to receive (something) from somebody temporarily, expecting to return it.
*In finance, monetary debt
*In language, the use of loanwords
* In arithmetic, when a digit becomes less than zero and the deficiency is taken f ...
. This process is done on the ground surface of the earth It is best suited for accessing mostly vertical deposits of minerals. Although open-pit mining is sometimes mistakenly referred to as "strip mining", the two methods are different (see above).
Mountaintop removal
Mountaintop removal mining (MTR) is a form of coal mining that mines coal seams beneath mountaintops by first removing the mountaintop overlying the coal seam. Explosives are used to break up the overburden (rock layers above the seam), which is then removed. The overburden is then dumped by haul trucks into fills in nearby hollows or valleys. MTR involves the mass restructuring of earth in order to reach coal seams as deep as below the surface. Mountaintop removal replaces the original steep landscape with a much flatter topography. Economic development attempts on reclaimed mine sites include prisons such the
Big Sandy Federal Penitentiary in
Martin County, Kentucky
Martin County is a county located in the U.S. state of Kentucky. As of the 2010 census, the population was 12,929. Its county seat is Inez. The county was founded in 1870 and is named for Congressman John Preston Martin. Warfield, Kentucky, ...
, small-town airports, golf courses such as Twisted Gun in
Mingo County, West Virginia
Mingo County is a county in the U.S. state of West Virginia. As of the 2020 census, the population was 23,568. Its county seat and largest city is Williamson. Created in 1895, Mingo is West Virginia's newest county, named for the historic Iro ...
and Stonecrest Golf Course in
Floyd County, Kentucky, as well as industrial scrubber sludge disposal sites, solid waste landfills, trailer parks, explosive manufacturers, and storage rental lockers.
This method has been increasingly used in recent years in the
Appalachian coal fields of
West Virginia
West Virginia is a state in the Appalachian, Mid-Atlantic and Southeastern regions of the United States.The Census Bureau and the Association of American Geographers classify West Virginia as part of the Southern United States while the B ...
,
Kentucky
Kentucky ( , ), officially the Commonwealth of Kentucky, is a state in the Southeastern region of the United States and one of the states of the Upper South. It borders Illinois, Indiana, and Ohio to the north; West Virginia and Virginia ...
,
Virginia
Virginia, officially the Commonwealth of Virginia, is a state in the Mid-Atlantic and Southeastern regions of the United States, between the Atlantic Coast and the Appalachian Mountains. The geography and climate of the Commonwealth ar ...
, and
Tennessee
Tennessee ( , ), officially the State of Tennessee, is a landlocked state in the Southeastern region of the United States. Tennessee is the 36th-largest by area and the 15th-most populous of the 50 states. It is bordered by Kentucky to th ...
in the United States. The profound changes in topography and disturbance of pre-existing ecosystems have made mountaintop removal highly controversial.
Advocates of mountaintop removal point out that once the areas are reclaimed as mandated by law, the technique provides premium flat land suitable for many uses in a region where flat land is rare. They also maintain that the new growth on reclaimed mountaintop mined areas is better able to support populations of game animals.
Critics contend that mountaintop removal is a disastrous practice that benefits a small number of corporations at the expense of
local communities and the
environment. A
U.S. Environmental Protection Agency
The Environmental Protection Agency (EPA) is an Independent agencies of the United States government, independent executive agency of the United States federal government tasked with environmental protection matters. President Richard Nixon pro ...
(EPA)
environmental impact statement finds that streams near valley fills sometimes may contain higher levels of minerals in the water and decreased aquatic
biodiversity
Biodiversity or biological diversity is the variety and variability of life on Earth. Biodiversity is a measure of variation at the genetic (''genetic variability''), species (''species diversity''), and ecosystem (''ecosystem diversity'') l ...
.
The statement also estimates that of Appalachian streams were buried by valley fills from 1985 to 2001.
Blasting at a mountaintop removal mine expels dust and fly-rock into the air, which can then disturb or settle onto private property nearby. This dust may contain sulfur compounds, which some claim corrode structures and tombstones and is a health hazard.
Although MTR sites are required to be reclaimed after mining is complete, reclamation has traditionally focused on stabilizing rock and controlling erosion, but not always on
reforesting the area. Quick-growing,
non-native grasses, planted to quickly provide vegetation on a site, compete with tree seedlings, and trees have difficulty establishing root systems in compacted backfill.
Consequently,
biodiversity
Biodiversity or biological diversity is the variety and variability of life on Earth. Biodiversity is a measure of variation at the genetic (''genetic variability''), species (''species diversity''), and ecosystem (''ecosystem diversity'') l ...
suffers in a region of the United States with numerous
endemic species
Endemism is the state of a species being found in a single defined geographic location, such as an island, state, nation, country or other defined zone; organisms that are indigenous to a place are not endemic to it if they are also found elsew ...
.
Erosion
Erosion is the action of surface processes (such as water flow or wind) that removes soil, rock, or dissolved material from one location on the Earth's crust, and then transports it to another location where it is deposited. Erosion is dis ...
also increases, which can intensify
flooding
A flood is an overflow of water ( or rarely other fluids) that submerges land that is usually dry. In the sense of "flowing water", the word may also be applied to the inflow of the tide. Floods are an area of study of the discipline hydrolog ...
. In the eastern United States, the Appalachian Regional Reforestation Initiative works to promote the use of trees in mining reclamation.
Dredging
Dredging is a method for mining below the water table. It is mostly associated with gold mining. Small dredges often use suction to bring the mined material up from the bottom of a water body. Historical large-scale dredging operations often used a floating dredge; a barge-like vessel that scoops material up through a conveyor belt on the bow, filters out the desired component on board, and returns the unwanted material to the water via another conveyor belt on the stern. In gravel-filled river valleys with shallow water tables, a floating dredge can work its way through the loose sediment in a pond of its own making.
Highwall mining
![Mega HIghwall Mining ADDCAR 16](https://upload.wikimedia.org/wikipedia/commons/f/f1/Mega_HIghwall_Mining_ADDCAR_16.jpg)
Highwall mining is another form of mining sometimes conducted to recover additional coal adjacent to a surface-mined area. The method evolved from auger mining but does not meet the definition of surface mining since it does not involve the removal of overburden to expose the coal seam.
CERB final report No. 2014-004 "Highwall Mining: Design Methodology, Safety, and Suitability" by Yi Luo characterizes it as a "relatively new semi-surface and semi-underground coal mining method that evolved from auger mining".
In highwall mining, the coal seam is penetrated by a continuous miner propelled by a hydraulic pushbeam transfer mechanism (PTM). A typical cycle includes sumping (launch-pushing forward) and shearing (raising and lowering the cutterhead boom to cut the entire height of the coal seam). As the coal recovery cycle continues, the cutterhead is progressively launched into the coal seam for . Then, the PTM automatically inserts a rectangular pushbeam (screw-conveyor segment) into the center section of the machine between the Powerhead and the cutterhead. The pushbeam system can penetrate nearly (proven in 2015 till today) into the coal seam. One patented highwall mining system uses augers enclosed inside the pushbeam that prevent the mined coal from being contaminated by rock debris during the conveyance process. Using a video imaging and/or a gamma-ray sensor and/or other geo-radar systems like a coal-rock interface detection sensor (CID), the operator can see ahead projection of the seam-rock interface and guide the continuous miner's progress. Highwall mining can produce thousands of tons of coal in contour-strip operations with narrow benches, previously mined areas, trench mine applications, and steep-dip seams by utilizing a controlled water-inflow pump system and/or a gas (inert) venting system.
Recovery with tunneling shape of drives used by highwall miners is much better than round augering holes, but the mapping of areas that have been developed by a highwall miner are not mapped as rigorously as deep mined areas. Very little soil is displaced in contrast with mountaintop removal; however, it is comparatively more expensive to own and operate a highwall miner.
Mapping of the outcrop, as well as core hole data and samples taken during the bench-making process, are taken into account to best project the panels that the highwall miner will cut. Obstacles that could be potentially damaged by subsidence and the natural contour of the highwall mine are taken into account, and a surveyor points the highwall miner in a line (theoretical survey plot-line) mostly perpendicular to the highwall. parallel lines represent the drive cut into the mountain (up to deep (2015 records), without heading or corrective steering actuation on a navigation azimuth during mining results in missing a portion of the coal seam and is a potential danger of cutting in pillars from previous mined drives due to horizontal drift (roll) of the pushbeam-cuttermodule string. Recently highwall miners have penetrated more than (2015 ongoing records into the coal seam, and today's models are capable of going farther, with the support of gyro navigation and not limited anymore by the amount of cable stored on the machine. The maximum depth would be determined by the stress of further penetration and associated specific-power draw (torsion and tension in screw transporters string), but today's optimized screw-transporters conveying embodiments (called pushbeams) with visual product development and discrete element modeling (DEM) using flow simulation behavior software shows smart-drive extended penetrations are possible, even so under steep inclined angles from horizontal to more than 30 degree downhole. In case of significant steep mining the new mining method phrase should be "directional mining" (commonly used technologies as valuable synergy directional drilling and directional mining are categorized in "surface to in-seam" (SIS) techniques), dry or wet, dewatering is developed or cutting and dredging through screw transporters are proactive in developing a roadmap of the leading global highwall mining engineering company.
Transport
Historically, moving materials out of surface mines was accomplished through manual labor, horse-drawn vehicles, and/or mining railways.
Current practices tend to use
haul truck
Haul trucks are off-highway, rigid dump trucks specifically engineered for use in high-production mining and heavy-duty construction environments. Haul trucks are also used for transporting construction equipment from job site to job site. Some ar ...
s on
haul road A haul video is a video recording, posted to the Internet, in which a person discusses items that they recently purchased, sometimes going into detail about their experiences during the purchase and the cost of the items they bought. The posting of ...
s designed into the features of the mine.
Environmental and health issues
To properly clean and restore a once operational surface mine requires a large sum of money and extensive remediation plans. Some mining companies do not have the funds to properly clean up, therefore the environment is negatively affected. Federal governments have emplace multiple laws and regulations which mining companies have to strictly follow. In the United States, the
Surface Mining Control and Reclamation Act of 1977
The Surface Mining Control and Reclamation Act of 1977 (SMCRA) is the primary federal law that regulates the environmental effects of coal mining in the United States.
SMCRA created two programs: one for regulating active coal mines and a second ...
mandates
reclamation
Reclaim, reclaimed, reclaimer, reclaiming or reclamation means "to get something back".
It may refer to:
* Land reclamation, creating new land from oceans, riverbeds, or lake beds
* Dedesertification, reversing of the land degradation in arid ...
of surface coal mines.
Reclamation for non-coal mines is regulated by state and local laws, which may vary widely. The
National Environmental Policy Act
The National Environmental Policy Act (NEPA) is a United States environmental law that promotes the enhancement of the environment and established the President's Council on Environmental Quality (CEQ). The law was enacted on January 1, 1970.Un ...
(NEPA),
Resource Conservation and Recovery Act
The Resource Conservation and Recovery Act (RCRA), enacted in 1976, is the principal federal law in the United States governing the disposal of solid waste and hazardous waste.United States. Resource Conservation and Recovery Act. , , ''et seq., ...
(RCRA),
(CERCLA) and many more laws deal with the subject of surface mining.
In some cases, even with proper legislation in place for surface mining some negative human health and environmental impacts remain.
Environmental impact
![Acid Mine Drainage](https://upload.wikimedia.org/wikipedia/commons/0/02/Acid_Mine_Drainage.jpg)
Surface mining can have a number of effects on the local environment. The negative effects involve soil, water, air, and noise pollution as well as landscape alteration and various other negatives.
However, new technology and proper management can make it easier to properly treat the local water supply and restore the local ecology which helps rebuild the environment.
Each type of surface mining has its own environmental impact, as laid out below.
Strip mining - Once operations have ended, the
tailings
In mining, tailings are the materials left over after the process of separating the valuable fraction from the uneconomic fraction (gangue) of an ore. Tailings are different to overburden, which is the waste rock or other material that overli ...
are placed back into the hole and covered up to make the site resemble the landscape before the mining operation. This process involves all ground vegetation in the area to be removed, which is a detriment to the environment. Topsoil may be placed over the tailing along with planting trees and other vegetation. Another reclamation method involves filling in the hole with water to create an artificial lake. Large tailing piles left behind may contain heavy metals which can leach out acids such as lead and copper and enter into water systems.
Open-pit mining
Open-pit mining, also known as open-cast or open-cut mining and in larger contexts mega-mining, is a surface mining technique of extracting rock or minerals from the earth from an open-air pit, sometimes known as a borrow.
This form of mini ...
- One of the world's largest types of mine and the size of these operations leave behind massive landscape scars, destruction to environmental habitats, and substantial clean-up cost. An open-pit mine can yield an enormous quantity of waste rock, sinkholes can form down the road, flooding and similar negative impacts as strip mining.
Mountaintop removal mining
Mountaintop removal mining (MTR), also known as mountaintop mining (MTM), is a form of surface mining at the summit or summit ridge of a mountain. Coal seams are extracted from a mountain by removing the land, or overburden, above the seams. Thi ...
- Involves the removal of whole mountaintops, the waste rock of which is used to flatten out the surrounding land by infilling rivers and valleys. This is very destructive as it physically permanently alters the landscape and the associated ecosystem. Throughout the
Appalachians
The Appalachian Mountains, often called the Appalachians, (french: Appalaches), are a system of mountains in eastern to northeastern North America. The Appalachians first formed roughly 480 million years ago during the Ordovician Period. They ...
in states such as Kentucky and Virginia, mountaintop removal is a common mining method where whole forests are cleared and the area becomes vulnerable to possible landslides, with restoration sometimes being too difficult/costly.
Dredging - A form of surface mining where the environmental impacts are primarily found underwater. The method of extracting material from the seafloor or any water body leads to the harmful risk of marine life. Overall, the effect are far less compared to the other mining methods. The influx of sediment can bury flora and fauna, change water levels and can alter the oxygen content. Water and noise pollution is a concern that must be monitored because marine life is very sensitive and vulnerable to drastic and harmful changes within their ecosystem.
Highwall mining - Has a lower environmental impact than mountaintop removal because of the smaller external surface area present but there is still negative side effects.
Air and noise pollution from blasting are common environmental effects along with the large tailing piles, which can leach into waterways and numerous ecosystems.
See also
*
Shaft mining
Shaft mining or shaft sinking is the action of excavating a mine shaft from the top down, where there is initially no access to the bottom. Shallow shafts, typically sunk for civil engineering projects, differ greatly in execution method from ...
*
Hobet Coal Mine
References
External links
"Why Surface Mine?" an argument in favor of surface mining, by an executive of
International Coal Group
International Coal Group, Inc. (ICG), is a company headquartered in Teays Valley, West Virginia that was incorporated in May 2004 by WL Ross & Co for the sole purpose of acquiring certain assets of Horizon. ICG eventually operated 12 mining comple ...
{{Authority control
Surface mining
Environmental impact of mining